]> git.rkrishnan.org Git - pihpsdr.git/shortlog
pihpsdr.git
2022-02-22 c vwDo not "apply mode settings" for the second RX when...
2022-02-22 c vwHandle case where CW key-down arrives before RX/TX...
2022-02-03 c vwIncluded TX compressor on/off and level in the list of
2022-02-03 c vwRemoved "compression slider instead of squelch slider...
2022-01-29 c vwSmall corrections for "CW Keyers"
2022-01-29 c vwmidi3.c: removed tons of un-necessary includes
2022-01-27 c vwCorrections to the MIDI menu
2022-01-26 c vwSmall cosmetic changes as preparation for next merge...
2022-01-25 c vwcorrected typo in manual merge
2022-01-25 c vwManual merge with John's update (mainly removing debug...
2022-01-25 c vwgpio.c: made millis() uint32_t to conform to i2c.c
2022-01-25 c vwRemoved declaration of millis() from gpio.h since this...
2022-01-25 c vwManually merged in John's updates
2022-01-25 c vwMade "manual att option" in PS menu a little bit nicer...
2022-01-25 c vwPS menu: show spin button for manual setting of TX...
2022-01-21 c vwBetter support for external CW keyers, compatible with...
2022-01-19 c vwMake sure both receivers have the same sample rate...
2022-01-18 c vwsmall typo in "git rebase" command in scripts.tar corrected
2022-01-18 c vw"Brutal" solution to the "OZY hangs when changing the...
2022-01-17 c vwSome further OZY changes (thanks Rick!)
2022-01-17 c vwMerge branch 'master' of github.com:dl1ycf/pihpsdr
2022-01-17 c vwSome changes suggested by Rick.
2022-01-16 DL1YCFRe-inserted a piece of code in old_protocol.c that was
2022-01-16 c vwSmall correction for CHARLY25 model simulation
2022-01-16 c vwProtect sending of ozy buffers with a MUTEX, since...
2022-01-16 c vwIn nearly all cases where there was a check on DEVICE_M...
2022-01-14 c vwMinor changes of "Compile from Sources" documentation...
2022-01-14 c vwMaintain atlas_janus for "Janus Only" operation
2022-01-14 c vwhpsdrsim: allow "-metis" instead of "-atlas" to trigger...
2022-01-14 c vwcorrected OZY/penelope correction
2022-01-14 c vwCorrection for OZY/Penelope and initial Alex antenna...
2022-01-14 c vwCorrected typos
2022-01-14 c vwa) More reasonable default settings of the ATLAS bits...
2022-01-14 c vwSome corrections for OZY devices
2022-01-14 c vwReverted function of the "Mute audio to radio" check...
2022-01-13 c vwSome more HermesLite2 simulation
2022-01-13 c vwBe more specific about some of the protocol bits.
2022-01-13 c vwInit additional fields after OZY discovery, most impor...
2022-01-13 c vwUSBOZY: by default, assume "No Janus"
2022-01-13 c vwMaintain metis_offset for USB/OYZ as well!
2022-01-13 c vwSet "standard" min and max radio frequencies for OZY.
2022-01-13 c vwFinished new layout of the Radio menu.
2022-01-12 c vwReverted test output
2022-01-12 c vwConverted long lists of radio buttons to combo-boxes, to
2022-01-12 c vwCorrection: don't assume Penelope as mic source by...
2022-01-12 c vwRe-visited the "ATLAS" bits, and introduced the choice
2022-01-10 c vwUpdated "compile from sources" instructions
2022-01-10 c vwCorrected band stack settings for 70, 220, 902 MHz
2022-01-09 c vwFinalized "routed UDP detection" feature
2022-01-07 c vwPrevent "duplicate UDP discovery" if IP addr given...
2022-01-07 c vwMoved variable discover_only_stemlab from stemlab_disco...
2022-01-06 c vwAdded feature to connect to "distant" radios by specifi...
2022-01-05 c vwadded CLOCK_MONOTONIC_RAW
2022-01-05 c vwActivate "helper functions" for debouncing in GPIO...
2022-01-05 c vw"Silence first RX samples after TR/RX" feature: added...
2022-01-05 c vwFinalized the "silence residual TX signal after TX...
2022-01-04 c vwTest code for Paul to address the "Residual audio"...
2022-01-02 c vwradio.c: updated some comments regarding the step atten...
2021-12-30 DL1YCFSplit "radio_band_changed" into "set_alex_antennas...
2021-12-30 DL1YCFHeader files: explicitly indicate void argument lists in
2021-12-29 c vwsome cosmetic changes
2021-12-29 c vwclient_server.c: added comment to forcing can_transmit...
2021-12-28 c vwMake the current band a local static variable in band...
2021-12-28 c vwSome "polishing" (removing unused variables etc.) and...
2021-12-26 DL1YCFMajor update of the "compile from sources" instructions...
2021-12-26 DL1YCFOld MIDI documentation deleted
2021-12-25 c vwAdded a compile-time option to log all incoming packets...
2021-12-25 c vwcorrected a typo in a comment
2021-12-22 c vwa) Send data to the radio in equal pace, not in bursts
2021-12-22 c vwRemoved "smooth scaling" of TX IQ samples for HermesLit...
2021-12-17 c vwAdded RFGAIN to client/server
2021-12-17 c vwEnable changing CW parameters if not compiled with...
2021-12-06 c vwClient/Server: set RECEIVERS=2
2021-12-06 c vwmox_update/tune_update: if (!can_transmit), then quickl...
2021-12-06 c vwactions.c: MOX/TUNE: use mox_update/tune_update
2021-12-05 DL1YCFtypo corrected
2021-12-05 DL1YCFUpdate of vfo_set_frequency.
2021-12-05 DL1YCFSome clean-up within rigctl.
2021-12-05 c vwanother typo
2021-12-05 c vwcorrected typo
2021-12-04 DL1YCFtypo fixed
2021-12-04 DL1YCFFurther changes in the "big merge" process
2021-12-04 DL1YCFClientServer: make it compile at least
2021-12-04 DL1YCFnew/old protocol.c: cosmetic changes to facilitate...
2021-11-26 c vwInclude time stamp in SEQ errors in the log file
2021-11-26 c vwsynchronized upon merging
2021-11-26 c vwsynchronized upon merging
2021-11-25 c vwfixed silly typo introduced when merging.
2021-11-25 c vwManual merge of John's corrections
2021-11-25 c vwMake millis() global to allow debouncing in i2c.c
2021-11-25 c vwSome cosmetics to facilitate merging.
2021-11-25 c vwVFO divisor corrections by John.
2021-11-25 c vwBSTK menu: button labels change if bandstack changes.
2021-11-25 c vwpush-buttons: look at PRESSED vs RELEASED.
2021-11-25 c vwRemoved more pkg-config output from the command lines.
2021-11-23 c vwAutomatically enable/disable squelch when changing...
2021-11-23 c vwConsistent interface to set_squelch().
2021-11-23 c vwAdded default clauses to switch statements (just to...
2021-11-23 c vwMakefile. Regression: do not expand pkg-config outputs...
2021-11-23 c vwVFO_MENU: do not show the "Enable Squelch" check-box...
next