From: Brian Warner Date: Mon, 13 Aug 2007 20:28:40 +0000 (-0700) Subject: docs/configuration.txt: explain the files in the node's basedir, which ones are usefu... X-Git-Url: https://git.rkrishnan.org/%5B/%5D%20/file/URI:LIT:krugkidfnzsc4/index.php?a=commitdiff_plain;h=e6195caff19f7cf17eaf07ec9010983857903455;p=tahoe-lafs%2Ftahoe-lafs.git docs/configuration.txt: explain the files in the node's basedir, which ones are useful to modify, etc --- diff --git a/docs/configuration.txt b/docs/configuration.txt new file mode 100644 index 00000000..afa54fde --- /dev/null +++ b/docs/configuration.txt @@ -0,0 +1,160 @@ + += Configuring a Tahoe node = + +A Tahoe node is configured by writing files to its base directory. These +files are read by the node when it starts, so each time you change them, you +need to restart the node. + +The node also writes state to its base directory, so it will create files on +its own. + +This document contains a complete list of the config files that are examined +by the client node, as well as the state files that you'll observe in its +base directory. + +== Client Configuration == + +introducer.furl and vdrive.furl (mandatory): These FURLs tell the client how +to connect to the introducer/vdrive server. Each Tahoe grid is defined by +this pair. They are created by the introducer/vdrive-server node and written +into its base directory when it starts, whereupon they should be published to +everyone who wishes to attach a client to that grid + +webport (optional): This controls where the client's webserver should listen, +providing vdrive access as defined in webapi.txt . This file should contain a +Twisted "strports" specification, such as "8080" or +"tcp:8080:interface=127.0.0.1". + +client.port (optional): This controls which port the node listens on. If not +provided, the node will ask the kernel for any available port, and write it +to this file so that subsequent runs will re-use the same port. + +advertised_ip_addresses (optional): The node normally uses tools like +'ifconfig' to determine the set of IP addresses on which it can be reached +from nodes both near and far. The node introduces itself to the rest of the +grid with a FURL that contains a series of (ipaddr, port) pairs which other +nodes will use to contact this one. By providing this file, you can add to +this list. This can be useful if your node is running behind a firewall, but +you have created a port-forwarding to allow the outside world to access it. +Each line must have a dotted-quad IP address and an optional :portnum +specification: + + 123.45.67.89 + 44.55.66.77:8098 + +Lines that do not provide a port number will use the same client.port as the +automatically-discovered addresses. + +authorized_keys.SSHPORT: This enables an SSH-based interactive Python shell, +which can be used to inspect the internal state of the node, for debugging. +To cause the node to accept SSH connections on port 8022, symlink +"authorized_keys.8022" to your ~/.ssh/authorized_keys file, and it will +accept the same keys as the rest of your account. + + +== Node State == + +node.pem : This contains an SSL private-key certificate. The node generates +this the first time it is started, and re-uses it on subsequent runs. This +certificate allows the node to have a cryptographically-strong identifier +(the Foolscap "TubID"), and to establish secure connections to other nodes. + +global_root.uri: The first time the client contacts the vdrive-server, it +retrieves the dirnode URI of the global root directory, and writes it into +this file. On subsequent runs, this URI is used each time the user accesses +the global vdrive. + +my_vdrive.uri: The first time the client contacts the vdrive-server, it will +create a brand new directory to use as the non-shared private vdrive root, +and it stores the dirnode URI of this directory in this file. On subsequent +runs, it will read the URI from this file to provide access to the private +vdrive. + +storage/ : Nodes which host StorageServers will create this directory to hold +shares of files on behalf of other clients. There will be a directory +underneath it for each StorageIndex for which this node is holding shares. +There is also an "incoming" directory where partially-completed shares are +held while they are being received. + +client.tac : this file defines the client, by constructing the actual Client +instance each time the node is started. It is used by the 'twistd' +daemonization program (in the "-y" mode), which is run internally by the +"allmydata-tahoe start" command. This file is created by the "allmydata-tahoe +create-client" command. + +control.furl : this file contains a FURL that provides access to a control +port on the client node, from which files can be uploaded and downloaded. +This file is created with permissions that prevent anyone else from reading +it, to insure that only the owner of the client node can use this feature. +This port is intended for debugging and testing use. + +== Introducer/vdrive-server configuration == + +Introducer/vdrive-server nodes use the same 'advertised_ip_addresses' file +as client nodes. They also use 'authorized_keys.SSHPORT'. + +encoding_parameters (optional): This file sets the encoding parameters that +will be distributed to all client nodes and used when they encode files +(unless locally overridden). It should contain three numbers, separated by +whitespace, called "needed", "desired", and "total". + + "needed": this is the number of shares that will be needed to reconstruct + the file. Each share that is pushed to a StorageServer will be + the size of the original file divided by this number. + "desired": the encoding/upload process will be happy if it can push + this many shares to StorageServers. If it cannot, it will + report failure. + "total": this is the total number of shares that will be produced. The + expansion factor (i.e. the amount of space consumed on the whole + grid divided by the size of the file) will be total/needed. It does + not make a lot of sense to have "total" be much larger than the + maximum number of storage nodes you expect to ever have. + +The default value of encoding_parameters is "3 7 10". + + +== Introducer/vdrive-server state == + +The Introducer / Virtual-Drive Server node maintains some different state +than regular client nodes. Both of these services are currently hosted inside +the same node, although keeping the FURLs in separate files will make it +easier to split these services in the future. + +introducer.furl : This is generated the first time the introducer node is +started, and used again on subsequent runs, to give the introduction service +a persistent long-term identity. This file should be published and copied +into new client nodes before they are started for the first time. + +vdrive.furl : This is also generated the first time the node is started, and +re-used on later runs. This FURL provides access to the vdrive service, used +both to create+access all dirnodes and to learn about the global shared root +vdrive. + +introducer.port : this serves exactly the same purpose as 'client.port', but +has a different name to make it clear what kind of node is being run. + +vdrive/ : this directory is created by the vdrive service to hold the +encrypted contents of dirnodes on behalf of all clients. It contains one file +per dirnode, plus a file named 'root' which contains the binary storage index +of the global shared root vdrive. + +introducer.tac : this file is like client.tac but defines an +introducer/vdrive-server node instead of a client node. + +== Other files == + +logs/ : Each Tahoe node creates a directory to hold the log messages produced +as the node runs. These logfiles are created and rotated by the "twistd" +daemonization program, so logs/twistd.log will contain the most recent +messages, logs/twistd.log.1 will contain the previous ones, logs/twistd.log.2 +will be older still, and so on. twistd rotates logfiles after they grow +beyond 1MB in size. If the space consumed by logfiles becomes troublesome, +they should be pruned: a cron job to delete all files that were created more +than a month ago in this logs/ directory should be sufficient. + +my_nodeid : this is written by all nodes after startup, and contains a +base32-encoded (i.e. human-readable) NodeID that identifies this specific +node. This NodeID is the same string that gets displayed on the web page (in +the "which peers am I connected to" list), and the shortened form (the first +characters) is recorded in various log messages. +