User visible changes in Tahoe-LAFS. -*- outline -*- * Release ?.?.? (?) ** New Features *** Immutable Directories Tahoe can now create and handle immutable directories. These are read just like normal directories, but are "deep-immutable", meaning that all their children (and everything reachable from those children) must be immutable objects (i.e. immutable/literal files, and other immutable directories). These directories must be created in a single webapi call, which provides all of the children at once (instead of the usual create/add/add sequence, since they cannot be changed after creation). They have URIs that start with "URI:DIR2-CHK:" or "URI:DIR2-LIT:", and are described on the human-facing web interface (aka the "WUI") with a "DIR-IMM" abbreviation (as opposed to "DIR" for the usual read-write directories and "DIR-RO" for read-only directories). Tahoe releases before 1.6.0 cannot read the contents of an immutable directory. 1.5.0 will tolerate their presence in a directory listing (and display it as an "unknown node"). 1.4.1 and earlier cannot tolerate them: a DIR-IMM child in any directory will prevent the listing of that directory. Immutable directories are repairable, just like normal immutable files. The webapi "POST t=mkdir-immutable" call is used to create immutable directories. See docs/frontends/webapi.txt for details. *** "tahoe backup" now creates immutable directories, backupdb has dircache The "tahoe backup" command has been enhanced to create immutable directories (in previous releases, it created read-only mutable directories). This is significantly faster, since it does not need to create an RSA keypair for each new directory. Also "DIR-IMM" immutable directories are repairable, unlike "DIR-RO" read-only mutable directories (at least in this release: a future Tahoe release should be able to repair DIR-RO). In addition, the backupdb (used by "tahoe backup" to remember what it has already copied) has been enhanced to store information about existing immutable directories. This allows it to re-use directories that have moved but still contain identical contents, or which have been deleted and later replaced. (the 1.5.0 "tahoe backup" command could only re-use directories that were in the same place as they were in the immediately previous backup). With this change, the backup process no longer needs to read the previous snapshot out of the Tahoe grid, reducing the network load considerably. A "null backup" (in which nothing has changed since the previous backup) will require only two Tahoe-side operations: one to add an Archives/$TIMESTAMP entry, and a second to update the Latest/ link. On the local disk side, it will readdir() all your local directories and stat() all your local files. If you've been using "tahoe backup" for a while, you will notice that your first use of it after upgrading to 1.6.0 may take a long time: it must create proper immutable versions of all the old read-only mutable directories. This process won't take as long as the initial backup (where all the file contents had to be uploaded too): it will require time proportional to the number and size of your directories. After this initial pass, all subsequent passes should take a tiny fraction of the time. As noted above, Tahoe versions earlier than 1.5.0 cannot read immutable directories. ** Minor Changes The webapi acquired a new "t=mkdir-with-children" command, to create and populate a directory in a single call. This is significantly faster than using separate "t=mkdir" and "t=set_children" operations (it uses one gateway-to-grid roundtrip, instead of three or four). The t=set_children operation is now documented in docs/frontends/webapi.txt . Several small packaging improvements were made to facilitate the "tahoe-lafs" package being added to Ubuntu's "Karmic Koala" 9.10 release. Several mac/win32 binary libraries were removed, some figleaf code-coverage files were removed, a bundled copy of darcsver-1.2.1 was removed, and additional licensing text was added. * Release 1.5.0 (2009-08-01) ** Improvements Uploads of immutable files now use pipelined writes, improving upload speed slightly (10%) over high-latency connections. (#392) Processing large directories has been sped up, by removing a O(N^2) algorithm from the dirnode decoding path and retaining unmodified encrypted entries. (#750, #752) The human-facing web interface (aka the "WUI") received a significant CSS makeover by Kevin Reid, making it much prettier and easier to read. The WUI "check" and "deep-check" forms now include a "Renew Lease" checkbox, mirroring the CLI --add-lease option, so leases can be added or renewed from the web interface. The CLI "tahoe mv" command now refuses to overwrite directories. (#705) The CLI "tahoe webopen" command, when run without arguments, will now bring up the "Welcome Page" (node status and mkdir/upload forms). The 3.5MB limit on mutable files was removed, so it should be possible to upload arbitrarily-sized mutable files. Note, however, that the data format and algorithm remains the same, so using mutable files still requires bandwidth, computation, and RAM in proportion to the size of the mutable file. (#694) This version of Tahoe-LAFS will tolerate directory entries that contain filecap formats which it does not recognize: files and directories from the future. This should improve the user experience (for 1.5.0 users) when we add new cap formats in the future. Previous versions would fail badly, preventing the user from seeing or editing anything else in those directories. These unrecognized objects can be renamed and deleted, but obviously not read or written. Also they cannot generally be copied. (#683) ** Bugfixes deep-check-and-repair now tolerates read-only directories, such as the ones produced by the "tahoe backup" CLI command. Read-only directories and mutable files are checked, but not repaired. Previous versions threw an exception when attempting the repair and failed to process the remaining contents. We cannot yet repair these read-only objects, but at least this version allows the rest of the check+repair to proceed. (#625) A bug in 1.4.1 which caused a server to be listed multiple times (and frequently broke all connections to that server) was fixed. (#653) The plaintext-hashing code was removed from the Helper interface, removing the Helper's ability to mount a partial-information-guessing attack. (#722) ** Platform/packaging changes Tahoe-LAFS now runs on NetBSD, OpenBSD, ArchLinux, and NixOS, and on an embedded system based on an ARM CPU running at 266 MHz. Unit test timeouts have been raised to allow the tests to complete on extremely slow platforms like embedded ARM-based NAS boxes, which may take several hours to run the test suite. An ARM-specific data-corrupting bug in an older version of Crypto++ (5.5.2) was identified: ARM-users are encouraged to use recent Crypto++/pycryptopp which avoids this problem. Tahoe-LAFS now requires a SQLite library, either the sqlite3 that comes built-in with python2.5/2.6, or the add-on pysqlite2 if you're using python2.4. In the previous release, this was only needed for the "tahoe backup" command: now it is mandatory. Several minor documentation updates were made. To help get Tahoe-LAFS into Linux distributions like Fedora and Debian, packaging improvements are being made in both Tahoe-LAFS and related libraries like pycryptopp and zfec. The Crypto++ library included in the pycryptopp package has been upgraded to version 5.6.0 of Crypto++, which includes a more efficient implementation of SHA-256 in assembly for x86 or amd64 architectures. ** dependency updates foolscap-0.4.1 no python-2.4.0 or 2.4.1 (2.4.2 is good) (they contained a bug in base64.b32decode) avoid python-2.6 on windows with mingw: compiler issues python2.4 requires pysqlite2 (2.5,2.6 does not) no python-3.x pycryptopp-0.5.15 * Release 1.4.1 (2009-04-13) ** Garbage Collection The big feature for this release is the implementation of garbage collection, allowing Tahoe storage servers to delete shares for old deleted files. When enabled, this uses a "mark and sweep" process: clients are responsible for updating the leases on their shares (generally by running "tahoe deep-check --add-lease"), and servers are allowed to delete any share which does not have an up-to-date lease. The process is described in detail in docs/garbage-collection.txt . The server must be configured to enable garbage-collection, by adding directives to the [storage] section that define an age limit for shares. The default configuration will not delete any shares. Both servers and clients should be upgraded to this release to make the garbage-collection as pleasant as possible. 1.2.0 servers have code to perform the update-lease operation but it suffers from a fatal bug, while 1.3.0 servers have update-lease but will return an exception for unknown storage indices, causing clients to emit an Incident for each exception, slowing the add-lease process down to a crawl. 1.1.0 servers did not have the add-lease operation at all. ** Security/Usability Problems Fixed A super-linear algorithm in the Merkle Tree code was fixed, which previously caused e.g. download of a 10GB file to take several hours before the first byte of plaintext could be produced. The new "alacrity" is about 2 minutes. A future release should reduce this to a few seconds by fixing ticket #442. The previous version permitted a small timing attack (due to our use of strcmp) against the write-enabler and lease-renewal/cancel secrets. An attacker who could measure response-time variations of approximatly 3ns against a very noisy background time of about 15ms might be able to guess these secrets. We do not believe this attack was actually feasible. This release closes the attack by first hashing the two strings to be compared with a random secret. ** webapi changes In most cases, HTML tracebacks will only be sent if an "Accept: text/html" header was provided with the HTTP request. This will generally cause browsers to get an HTMLized traceback but send regular text/plain tracebacks to non-browsers (like the CLI clients). More errors have been mapped to useful HTTP error codes. The streaming webapi operations (deep-check and manifest) now have a way to indicate errors (an output line that starts with "ERROR" instead of being legal JSON). See docs/frontends/webapi.txt for details. The storage server now has its own status page (at /storage), linked from the Welcome page. This page shows progress and results of the two new share-crawlers: one which merely counts shares (to give an estimate of how many files/directories are being stored in the grid), the other examines leases and reports how much space would be freed if GC were enabled. The page also shows how much disk space is present, used, reserved, and available for the Tahoe server, and whether the server is currently running in "read-write" mode or "read-only" mode. When a directory node cannot be read (perhaps because of insufficent shares), a minimal webapi page is created so that the "more-info" links (including a Check/Repair operation) will still be accessible. A new "reliability" page was added, with the beginnings of work on a statistical loss model. You can tell this page how many servers you are using and their independent failure probabilities, and it will tell you the likelihood that an arbitrary file will survive each repair period. The "numpy" package must be installed to access this page. A partial paper, written by Shawn Willden, has been added to docs/proposed/lossmodel.lyx . ** CLI changes "tahoe check" and "tahoe deep-check" now accept an "--add-lease" argument, to update a lease on all shares. This is the "mark" side of garbage collection. In many cases, CLI error messages have been improved: the ugly HTMLized traceback has been replaced by a normal python traceback. "tahoe deep-check" and "tahoe manifest" now have better error reporting. "tahoe cp" is now non-verbose by default. "tahoe backup" now accepts several "--exclude" arguments, to ignore certain files (like editor temporary files and version-control metadata) during backup. On windows, the CLI now accepts local paths like "c:\dir\file.txt", which previously was interpreted as a Tahoe path using a "c:" alias. The "tahoe restart" command now uses "--force" by default (meaning it will start a node even if it didn't look like there was one already running). The "tahoe debug consolidate" command was added. This takes a series of independent timestamped snapshot directories (such as those created by the allmydata.com windows backup program, or a series of "tahoe cp -r" commands) and creates new snapshots that used shared read-only directories whenever possible (like the output of "tahoe backup"). In the most common case (when the snapshots are fairly similar), the result will use significantly fewer directories than the original, allowing "deep-check" and similar tools to run much faster. In some cases, the speedup can be an order of magnitude or more. This tool is still somewhat experimental, and only needs to be run on large backups produced by something other than "tahoe backup", so it was placed under the "debug" category. "tahoe cp -r --caps-only tahoe:dir localdir" is a diagnostic tool which, instead of copying the full contents of files into the local directory, merely copies their filecaps. This can be used to verify the results of a "consolidation" operation. ** other fixes The codebase no longer rauses RuntimeError as a kind of assert(). Specific exception classes were created for each previous instance of RuntimeError. Many unit tests were changed to use a non-network test harness, speeding them up considerably. Deep-traversal operations (manifest and deep-check) now walk individual directories in alphabetical order. Occasional turn breaks are inserted to prevent a stack overflow when traversing directories with hundreds of entries. The experimental SFTP server had its path-handling logic changed slightly, to accomodate more SFTP clients, although there are still issues (#645). * Release 1.3.0 (2009-02-13) ** Checker/Verifier/Repairer The primary focus of this release has been writing a checker / verifier / repairer for files and directories. "Checking" is the act of asking storage servers whether they have a share for the given file or directory: if there are not enough shares available, the file or directory will be unrecoverable. "Verifying" is the act of downloading and cryptographically asserting that the server's share is undamaged: it requires more work (bandwidth and CPU) than checking, but can catch problems that simple checking cannot. "Repair" is the act of replacing missing or damaged shares with new ones. This release includes a full checker, a partial verifier, and a partial repairer. The repairer is able to handle missing shares: new shares are generated and uploaded to make up for the missing ones. This is currently the best application of the repairer: to replace shares that were lost because of server departure or permanent drive failure. The repairer in this release is somewhat able to handle corrupted shares. The limitations are: * Immutable verifier is incomplete: not all shares are used, and not all fields of those shares are verified. Therefore the immutable verifier has only a moderate chance of detecting corrupted shares. * The mutable verifier is mostly complete: all shares are examined, and most fields of the shares are validated. * The storage server protocol offers no way for the repairer to replace or delete immutable shares. If corruption is detected, the repairer will upload replacement shares to other servers, but the corrupted shares will be left in place. * read-only directories and read-only mutable files must be repaired by someone who holds the write-cap: the read-cap is insufficient. Moreover, the deep-check-and-repair operation will halt with an error if it attempts to repair one of these read-only objects. * Some forms of corruption can cause both download and repair operations to fail. A future release will fix this, since download should be tolerant of any corruption as long as there are at least 'k' valid shares, and repair should be able to fix any file that is downloadable. If the downloader, verifier, or repairer detects share corruption, the servers which provided the bad shares will be notified (via a file placed in the BASEDIR/storage/corruption-advisories directory) so their operators can manually delete the corrupted shares and investigate the problem. In addition, the "incident gatherer" mechanism will automatically report share corruption to an incident gatherer service, if one is configured. Note that corrupted shares indicate hardware failures, serious software bugs, or malice on the part of the storage server operator, so a corrupted share should be considered highly unusual. By periodically checking/repairing all files and directories, objects in the Tahoe filesystem remain resistant to recoverability failures due to missing and/or broken servers. This release includes a wapi mechanism to initiate checks on individual files and directories (with or without verification, and with or without automatic repair). A related mechanism is used to initiate a "deep-check" on a directory: recursively traversing the directory and its children, checking (and/or verifying/repairing) everything underneath. Both mechanisms can be run with an "output=JSON" argument, to obtain machine-readable check/repair status results. These results include a copy of the filesystem statistics from the "deep-stats" operation (including total number of files, size histogram, etc). If repair is possible, a "Repair" button will appear on the results page. The client web interface now features some extra buttons to initiate check and deep-check operations. When these operations finish, they display a results page that summarizes any problems that were encountered. All long-running deep-traversal operations, including deep-check, use a start-and-poll mechanism, to avoid depending upon a single long-lived HTTP connection. docs/frontends/webapi.txt has details. ** Efficient Backup The "tahoe backup" command is new in this release, which creates efficient versioned backups of a local directory. Given a local pathname and a target Tahoe directory, this will create a read-only snapshot of the local directory in $target/Archives/$timestamp. It will also create $target/Latest, which is a reference to the latest such snapshot. Each time you run "tahoe backup" with the same source and target, a new $timestamp snapshot will be added. These snapshots will share directories that have not changed since the last backup, to speed up the process and minimize storage requirements. In addition, a small database is used to keep track of which local files have been uploaded already, to avoid uploading them a second time. This drastically reduces the work needed to do a "null backup" (when nothing has changed locally), making "tahoe backup' suitable to run from a daily cronjob. Note that the "tahoe backup" CLI command must be used in conjunction with a 1.3.0-or-newer Tahoe client node; there was a bug in the 1.2.0 webapi implementation that would prevent the last step (create $target/Latest) from working. ** Large Files The 12GiB (approximate) immutable-file-size limitation is lifted. This release knows how to handle so-called "v2 immutable shares", which permit immutable files of up to about 18 EiB (about 3*10^14). These v2 shares are created if the file to be uploaded is too large to fit into v1 shares. v1 shares are created if the file is small enough to fit into them, so that files created with tahoe-1.3.0 can still be read by earlier versions if they are not too large. Note that storage servers also had to be changed to support larger files, and this release is the first release in which they are able to do that. Clients will detect which servers are capable of supporting large files on upload and will not attempt to upload shares of a large file to a server which doesn't support it. ** FTP/SFTP Server Tahoe now includes experimental FTP and SFTP servers. When configured with a suitable method to translate username+password into a root directory cap, it provides simple access to the virtual filesystem. Remember that FTP is completely unencrypted: passwords, filenames, and file contents are all sent over the wire in cleartext, so FTP should only be used on a local (127.0.0.1) connection. This feature is still in development: there are no unit tests yet, and behavior with respect to Unicode filenames is uncertain. Please see docs/frontends/FTP-and-SFTP.txt for configuration details. (#512, #531) ** CLI Changes This release adds the 'tahoe create-alias' command, which is a combination of 'tahoe mkdir' and 'tahoe add-alias'. This also allows you to start using a new tahoe directory without exposing its URI in the argv list, which is publicly visible (through the process table) on most unix systems. Thanks to Kevin Reid for bringing this issue to our attention. The single-argument form of "tahoe put" was changed to create an unlinked file. I.e. "tahoe put bar.txt" will take the contents of a local "bar.txt" file, upload them to the grid, and print the resulting read-cap; the file will not be attached to any directories. This seemed a bit more useful than the previous behavior (copy stdin, upload to the grid, attach the resulting file into your default tahoe: alias in a child named 'bar.txt'). "tahoe put" was also fixed to handle mutable files correctly: "tahoe put bar.txt URI:SSK:..." will read the contents of the local bar.txt and use them to replace the contents of the given mutable file. The "tahoe webopen" command was modified to accept aliases. This means "tahoe webopen tahoe:" will cause your web browser to open to a "wui" page that gives access to the directory associated with the default "tahoe:" alias. It should also accept leading slashes, like "tahoe webopen tahoe:/stuff". Many esoteric debugging commands were moved down into a "debug" subcommand: tahoe debug dump-cap tahoe debug dump-share tahoe debug find-shares tahoe debug catalog-shares tahoe debug corrupt-share The last command ("tahoe debug corrupt-share") flips a random bit of the given local sharefile. This is used to test the file verifying/repairing code, and obviously should not be used on user data. The cli might not correctly handle arguments which contain non-ascii characters in Tahoe v1.3 (although depending on your platform it might, especially if your platform can be configured to pass such characters on the command-line in utf-8 encoding). See http://allmydata.org/trac/tahoe/ticket/565 for details. ** Web changes The "default webapi port", used when creating a new client node (and in the getting-started documentation), was changed from 8123 to 3456, to reduce confusion when Tahoe accessed through a Firefox browser on which the "Torbutton" extension has been installed. Port 8123 is occasionally used as a Tor control port, so Torbutton adds 8123 to Firefox's list of "banned ports" to avoid CSRF attacks against Tor. Once 8123 is banned, it is difficult to diagnose why you can no longer reach a Tahoe node, so the Tahoe default was changed. Note that 3456 is reserved by IANA for the "vat" protocol, but there are argueably more Torbutton+Tahoe users than vat users these days. Note that this will only affect newly-created client nodes. Pre-existing client nodes, created by earlier versions of tahoe, may still be listening on 8123. All deep-traversal operations (start-manifest, start-deep-size, start-deep-stats, start-deep-check) now use a start-and-poll approach, instead of using a single (fragile) long-running synchronous HTTP connection. All these "start-" operations use POST instead of GET. The old "GET manifest", "GET deep-size", and "POST deep-check" operations have been removed. The new "POST start-manifest" operation, when it finally completes, results in a table of (path,cap), instead of the list of verifycaps produced by the old "GET manifest". The table is available in several formats: use output=html, output=text, or output=json to choose one. The JSON output also includes stats, and a list of verifycaps and storage-index strings. The "return_to=" and "when_done=" arguments have been removed from the t=check and deep-check operations. The top-level status page (/status) now has a machine-readable form, via "/status/?t=json". This includes information about the currently-active uploads and downloads, which may be useful for frontends that wish to display progress information. There is no easy way to correlate the activities displayed here with recent wapi requests, however. Any files in BASEDIR/public_html/ (configurable) will be served in response to requests in the /static/ portion of the URL space. This will simplify the deployment of javascript-based frontends that can still access wapi calls by conforming to the (regrettable) "same-origin policy". The welcome page now has a "Report Incident" button, which is tied into the "Incident Gatherer" machinery. If the node is attached to an incident gatherer (via log_gatherer.furl), then pushing this button will cause an Incident to be signalled: this means recent log events are aggregated and sent in a bundle to the gatherer. The user can push this button after something strange takes place (and they can provide a short message to go along with it), and the relevant data will be delivered to a centralized incident-gatherer for later processing by operations staff. The "HEAD" method should now work correctly, in addition to the usual "GET", "PUT", and "POST" methods. "HEAD" is supposed to return exactly the same headers as "GET" would, but without any of the actual response body data. For mutable files, this now does a brief mapupdate (to figure out the size of the file that would be returned), without actually retrieving the file's contents. The "GET" operation on files can now support the HTTP "Range:" header, allowing requests for partial content. This allows certain media players to correctly stream audio and movies out of a Tahoe grid. The current implementation uses a disk-based cache in BASEDIR/private/cache/download , which holds the plaintext of the files being downloaded. Future implementations might not use this cache. GET for immutable files now returns an ETag header. Each file and directory now has a "Show More Info" web page, which contains much of the information that was crammed into the directory page before. This includes readonly URIs, storage index strings, object type, buttons to control checking/verifying/repairing, and deep-check/deep-stats buttons (for directories). For mutable files, the "replace contents" upload form has been moved here too. As a result, the directory page is now much simpler and cleaner, and several potentially-misleading links (like t=uri) are now gone. Slashes are discouraged in Tahoe file/directory names, since they cause problems when accessing the filesystem through the wapi. However, there are a couple of accidental ways to generate such names. This release tries to make it easier to correct such mistakes by escaping slashes in several places, allowing slashes in the t=info and t=delete commands, and in the source (but not the target) of a t=rename command. ** Packaging Tahoe's dependencies have been extended to require the "[secure_connections]" feature from Foolscap, which will cause pyOpenSSL to be required and/or installed. If OpenSSL and its development headers are already installed on your system, this can occur automatically. Tahoe now uses pollreactor (instead of the default selectreactor) to work around a bug between pyOpenSSL and the most recent release of Twisted (8.1.0). This bug only affects unit tests (hang during shutdown), and should not impact regular use. The Tahoe source code tarballs now come in two different forms: regular and "sumo". The regular tarball contains just Tahoe, nothing else. When building from the regular tarball, the build process will download any unmet dependencies from the internet (starting with the index at PyPI) so it can build and install them. The "sumo" tarball contains copies of all the libraries that Tahoe requires (foolscap, twisted, zfec, etc), so using the "sumo" tarball should not require any internet access during the build process. This can be useful if you want to build Tahoe while on an airplane, a desert island, or other bandwidth-limited environments. Similarly, allmydata.org now hosts a "tahoe-deps" tarball which contains the latest versions of all these dependencies. This tarball, located at http://allmydata.org/source/tahoe/deps/tahoe-deps.tar.gz, can be unpacked in the tahoe source tree (or in its parent directory), and the build process should satisfy its downloading needs from it instead of reaching out to PyPI. This can be useful if you want to build Tahoe from a darcs checkout while on that airplane or desert island. Because of the previous two changes ("sumo" tarballs and the "tahoe-deps" bundle), most of the files have been removed from misc/dependencies/ . This brings the regular Tahoe tarball down to 2MB (compressed), and the darcs checkout (without history) to about 7.6MB. A full darcs checkout will still be fairly large (because of the historical patches which included the dependent libraries), but a 'lazy' one should now be small. The default "make" target is now an alias for "setup.py build", which itself is an alias for "setup.py develop --prefix support", with some extra work before and after (see setup.cfg). Most of the complicated platform-dependent code in the Makefile was rewritten in Python and moved into setup.py, simplifying things considerably. Likewise, the "make test" target now delegates most of its work to "setup.py test", which takes care of getting PYTHONPATH configured to access the tahoe code (and dependencies) that gets put in support/lib/ by the build_tahoe step. This should allow unit tests to be run even when trial (which is part of Twisted) wasn't already installed (in this case, trial gets installed to support/bin because Twisted is a dependency of Tahoe). Tahoe is now compatible with the recently-released Python 2.6 , although it is recommended to use Tahoe on Python 2.5, on which it has received more thorough testing and deployment. Tahoe is now compatible with simplejson-2.0.x . The previous release assumed that simplejson.loads always returned unicode strings, which is no longer the case in 2.0.x . ** Grid Management Tools Several tools have been added or updated in the misc/ directory, mostly munin plugins that can be used to monitor a storage grid. The misc/spacetime/ directory contains a "disk watcher" daemon (startable with 'tahoe start'), which can be configured with a set of HTTP URLs (pointing at the wapi '/statistics' page of a bunch of storage servers), and will periodically fetch disk-used/disk-available information from all the servers. It keeps this information in an Axiom database (a sqlite-based library available from divmod.org). The daemon computes time-averaged rates of disk usage, as well as a prediction of how much time is left before the grid is completely full. The misc/munin/ directory contains a new set of munin plugins (tahoe_diskleft, tahoe_diskusage, tahoe_doomsday) which talk to the disk-watcher and provide graphs of its calculations. To support the disk-watcher, the Tahoe statistics component (visible through the wapi at the /statistics/ URL) now includes disk-used and disk-available information. Both are derived through an equivalent of the unix 'df' command (i.e. they ask the kernel for the number of free blocks on the partition that encloses the BASEDIR/storage directory). In the future, the disk-available number will be further influenced by the local storage policy: if that policy says that the server should refuse new shares when less than 5GB is left on the partition, then "disk-available" will report zero even though the kernel sees 5GB remaining. The 'tahoe_overhead' munin plugin interacts with an allmydata.com-specific server which reports the total of the 'deep-size' reports for all active user accounts, compares this with the disk-watcher data, to report on overhead percentages. This provides information on how much space could be recovered once Tahoe implements some form of garbage collection. ** Configuration Changes: single INI-format tahoe.cfg file The Tahoe node is now configured with a single INI-format file, named "tahoe.cfg", in the node's base directory. Most of the previous multiple-separate-files are still read for backwards compatibility (the embedded SSH debug server and the advertised_ip_addresses files are the exceptions), but new directives will only be added to tahoe.cfg . The "tahoe create-client" command will create a tahoe.cfg for you, with sample values commented out. (ticket #518) tahoe.cfg now has controls for the foolscap "keepalive" and "disconnect" timeouts (#521). tahoe.cfg now has controls for the encoding parameters: "shares.needed" and "shares.total" in the "[client]" section. The default parameters are still 3-of-10. The inefficient storage 'sizelimit' control (which established an upper bound on the amount of space that a storage server is allowed to consume) has been replaced by a lightweight 'reserved_space' control (which establishes a lower bound on the amount of remaining space). The storage server will reject all writes that would cause the remaining disk space (as measured by a '/bin/df' equivalent) to drop below this value. The "[storage]reserved_space=" tahoe.cfg parameter controls this setting. (note that this only affects immutable shares: it is an outstanding bug that reserved_space does not prevent the allocation of new mutable shares, nor does it prevent the growth of existing mutable shares). ** Other Changes Clients now declare which versions of the protocols they support. This is part of a new backwards-compatibility system: http://allmydata.org/trac/tahoe/wiki/Versioning . The version strings for human inspection (as displayed on the Welcome web page, and included in logs) now includes a platform identifer (frequently including a linux distribution name, processor architecture, etc). Several bugs have been fixed, including one that would cause an exception (in the logs) if a wapi download operation was cancelled (by closing the TCP connection, or pushing the "stop" button in a web browser). Tahoe now uses Foolscap "Incidents", writing an "incident report" file to logs/incidents/ each time something weird occurs. These reports are available to an "incident gatherer" through the flogtool command. For more details, please see the Foolscap logging documentation. An incident-classifying plugin function is provided in misc/incident-gatherer/classify_tahoe.py . If clients detect corruption in shares, they now automatically report it to the server holding that share, if it is new enough to accept the report. These reports are written to files in BASEDIR/storage/corruption-advisories . The 'nickname' setting is now defined to be a UTF-8 -encoded string, allowing non-ascii nicknames. The 'tahoe start' command will now accept a --syslog argument and pass it through to twistd, making it easier to launch non-Tahoe nodes (like the cpu-watcher) and have them log to syslogd instead of a local file. This is useful when running a Tahoe node out of a USB flash drive. The Mac GUI in src/allmydata/gui/ has been improved. * Release 1.2.0 (2008-07-21) ** Security This release makes the immutable-file "ciphertext hash tree" mandatory. Previous releases allowed the uploader to decide whether their file would have an integrity check on the ciphertext or not. A malicious uploader could use this to create a readcap that would download as one file or a different one, depending upon which shares the client fetched first, with no errors raised. There are other integrity checks on the shares themselves, preventing a storage server or other party from violating the integrity properties of the read-cap: this failure was only exploitable by the uploader who gives you a carefully constructed read-cap. If you download the file with Tahoe 1.2.0 or later, you will not be vulnerable to this problem. #491 This change does not introduce a compatibility issue, because all existing versions of Tahoe will emit the ciphertext hash tree in their shares. ** Dependencies Tahoe now requires Foolscap-0.2.9 . It also requires pycryptopp 0.5 or newer, since earlier versions had a bug that interacted with specific compiler versions that could sometimes result in incorrect encryption behavior. Both packages are included in the Tahoe source tarball in misc/dependencies/ , and should be built automatically when necessary. ** Web API Web API directory pages should now contain properly-slash-terminated links to other directories. They have also stopped using absolute links in forms and pages (which interfered with the use of a front-end load-balancing proxy). The behavior of the "Check This File" button changed, in conjunction with larger internal changes to file checking/verification. The button triggers an immediate check as before, but the outcome is shown on its own page, and does not get stored anywhere. As a result, the web directory page no longer shows historical checker results. A new "Deep-Check" button has been added, which allows a user to initiate a recursive check of the given directory and all files and directories reachable from it. This can cause quite a bit of work, and has no intermediate progress information or feedback about the process. In addition, the results of the deep-check are extremely limited. A later release will improve this behavior. The web server's behavior with respect to non-ASCII (unicode) filenames in the "GET save=true" operation has been improved. To achieve maximum compatibility with variously buggy web browsers, the server does not try to figure out the character set of the inbound filename. It just echoes the same bytes back to the browser in the Content-Disposition header. This seems to make both IE7 and Firefox work correctly. ** Checker/Verifier/Repairer Tahoe is slowly acquiring convenient tools to check up on file health, examine existing shares for errors, and repair files that are not fully healthy. This release adds a mutable checker/verifier/repairer, although testing is very limited, and there are no web interfaces to trigger repair yet. The "Check" button next to each file or directory on the wapi page will perform a file check, and the "deep check" button on each directory will recursively check all files and directories reachable from there (which may take a very long time). Future releases will improve access to this functionality. ** Operations/Packaging A "check-grid" script has been added, along with a Makefile target. This is intended (with the help of a pre-configured node directory) to check upon the health of a Tahoe grid, uploading and downloading a few files. This can be used as a monitoring tool for a deployed grid, to be run periodically and to signal an error if it ever fails. It also helps with compatibility testing, to verify that the latest Tahoe code is still able to handle files created by an older version. The munin plugins from misc/munin/ are now copied into any generated debian packages, and are made executable (and uncompressed) so they can be symlinked directly from /etc/munin/plugins/ . Ubuntu "Hardy" was added as a supported debian platform, with a Makefile target to produce hardy .deb packages. Some notes have been added to docs/debian.txt about building Tahoe on a debian/ubuntu system. Storage servers now measure operation rates and latency-per-operation, and provides results through the /statistics web page as well as the stats gatherer. Munin plugins have been added to match. ** Other Tahoe nodes now use Foolscap "incident logging" to record unusual events to their NODEDIR/logs/incidents/ directory. These incident files can be examined by Foolscap logging tools, or delivered to an external log-gatherer for further analysis. Note that Tahoe now requires Foolscap-0.2.9, since 0.2.8 had a bug that complained about "OSError: File exists" when trying to create the incidents/ directory for a second time. If no servers are available when retrieving a mutable file (like a directory), the node now reports an error instead of hanging forever. Earlier releases would not only hang (causing the wapi directory listing to get stuck half-way through), but the internal dirnode serialization would cause all subsequent attempts to retrieve or modify the same directory to hang as well. #463 A minor internal exception (reported in logs/twistd.log, in the "stopProducing" method) was fixed, which complained about "self._paused_at not defined" whenever a file download was stopped from the web browser end. * Release 1.1.0 (2008-06-11) ** CLI: new "alias" model The new CLI code uses an scp/rsync -like interface, in which directories in the Tahoe storage grid are referenced by a colon-suffixed alias. The new commands look like: tahoe cp local.txt tahoe:virtual.txt tahoe ls work:subdir More functionality is available through the CLI: creating unlinked files and directories, recursive copy in or out of the storage grid, hardlinks, and retrieving the raw read- or write- caps through the 'ls' command. Please read docs/CLI.txt for complete details. ** wapi: new pages, new commands Several new pages were added to the web API: /helper_status : to describe what a Helper is doing /statistics : reports node uptime, CPU usage, other stats /file : for easy file-download URLs, see #221 /cap == /uri : future compatibility The localdir=/localfile= and t=download operations were removed. These required special configuration to enable anyways, but this feature was a security problem, and was mostly obviated by the new "cp -r" command. Several new options to the GET command were added: t=deep-size : add up the size of all immutable files reachable from the directory t=deep-stats : return a JSON-encoded description of number of files, size distribution, total size, etc POST is now preferred over PUT for most operations which cause side-effects. Most wapi calls now accept overwrite=, and default to overwrite=true . "POST /uri/DIRCAP/parent/child?t=mkdir" is now the preferred API to create multiple directories at once, rather than ...?t=mkdir-p . PUT to a mutable file ("PUT /uri/MUTABLEFILECAP", "PUT /uri/DIRCAP/child") will modify the file in-place. ** more munin graphs in misc/munin/ tahoe-introstats tahoe-rootdir-space tahoe_estimate_files mutable files published/retrieved tahoe_cpu_watcher tahoe_spacetime ** New Dependencies zfec 1.1.0 foolscap 0.2.8 pycryptopp 0.5 setuptools (now required at runtime) ** New Mutable-File Code The mutable-file handling code (mostly used for directories) has been completely rewritten. The new scheme has a better API (with a modify() method) and is less likely to lose data when several uncoordinated writers change a file at the same time. In addition, a single Tahoe process will coordinate its own writes. If you make two concurrent directory-modifying wapi calls to a single tahoe node, it will internally make one of them wait for the other to complete. This prevents auto-collision (#391). The new mutable-file code also detects errors during publish better. Earlier releases might believe that a mutable file was published when in fact it failed. ** other features The node now monitors its own CPU usage, as a percentage, measured every 60 seconds. 1/5/15 minute moving averages are available on the /statistics web page and via the stats-gathering interface. Clients now accelerate reconnection to all servers after being offline (#374). When a client is offline for a long time, it scales back reconnection attempts to approximately once per hour, so it may take a while to make the first attempt, but once any attempt succeeds, the other server connections will be retried immediately. A new "offloaded KeyGenerator" facility can be configured, to move RSA key generation out from, say, a wapi node, into a separate process. RSA keys can take several seconds to create, and so a wapi node which is being used for directory creation will be unavailable for anything else during this time. The Key Generator process will pre-compute a small pool of keys, to speed things up further. This also takes better advantage of multi-core CPUs, or SMP hosts. The node will only use a potentially-slow "du -s" command at startup (to measure how much space has been used) if the "sizelimit" parameter has been configured (to limit how much space is used). Large storage servers should turn off sizelimit until a later release improves the space-management code, since "du -s" on a terabyte filesystem can take hours. The Introducer now allows new announcements to replace old ones, to avoid buildups of obsolete announcements. Immutable files are limited to about 12GiB (when using the default 3-of-10 encoding), because larger files would be corrupted by the four-byte share-size field on the storage servers (#439). A later release will remove this limit. Earlier releases would allow >12GiB uploads, but the resulting file would be unretrievable. The docs/ directory has been rearranged, with old docs put in docs/historical/ and not-yet-implemented ones in docs/proposed/ . The Mac OS-X FUSE plugin has a significant bug fix: earlier versions would corrupt writes that used seek() instead of writing the file in linear order. The rsync tool is known to perform writes in this order. This has been fixed.