# setup.py will extend sys.path to include our support/lib/... directory
# itself. It will also create it in the beginning of the 'develop' command.
-PP=$(shell $(PYTHON) setup.py -q show_pythonpath)
-RUNPP=$(PYTHON) setup.py run_with_pythonpath
+TAHOE=$(PYTHON) bin/tahoe
+SOURCES=src/allmydata src/buildtest static misc bin/tahoe-script.template setup.py
+APPNAME=allmydata-tahoe
-.PHONY: make-version build
-
-# The 'darcsver' setup.py command comes in the 'darcsver' package:
-# http://pypi.python.org/pypi/darcsver It is necessary only if you want to
-# automatically produce a new _version.py file from the current darcs history.
+# This is necessary only if you want to automatically produce a new
+# _version.py file from the current git history (without doing a build).
+.PHONY: make-version
make-version:
- $(PYTHON) ./setup.py darcsver --count-all-patches
-
-# We want src/allmydata/_version.py to be up-to-date, but it's a fairly
-# expensive operation (about 6 seconds on a just-before-0.7.0 tree, probably
-# because of the 332 patches since the last tag), and we've removed the need
-# for an explicit 'build' step by removing the C code from src/allmydata and
-# by running everything in place. It would be neat to do:
-#
-#src/allmydata/_version.py: _darcs/patches
-# $(MAKE) make-version
-#
-# since that would update the embedded version string each time new darcs
-# patches were pulled, but without an obligatory 'build' step this rule
-# wouldn't be run frequently enough anyways.
-#
-# So instead, I'll just make sure that we update the version at least once
-# when we first start using the tree, and again whenever an explicit
-# 'make-version' is run, since then at least the developer has some means to
-# update things. It would be nice if 'make clean' deleted any
-# automatically-generated _version.py too, so that 'make clean; make all'
-# could be useable as a "what the heck is going on, get me back to a clean
-# state', but we need 'make clean' to work on non-darcs trees without
-# destroying useful information.
+ $(PYTHON) ./setup.py update_version
.built:
$(MAKE) build
src/allmydata/_version.py:
$(MAKE) make-version
-# c.f. ticket #455, there is a problem in the intersection of setuptools,
-# twisted's setup.py, and nevow's setup.py . A Tahoe build, to satisfy its
-# dependencies, may try to build both Twisted and Nevow. If both of these
-# occur during the same invocation of 'setup.py develop', then the Nevow
-# build will fail with an "ImportError: No module named components". Running
-# the build a second time will succeed. Until there is a new version of
-# setuptools which properly sandboxes sys.modules (or a new version of nevow
-# which doesn't import twisted during its build, or a new version of twisted
-# which doesn't import itself during its build), we just build tahoe twice
-# and ignore the errors from the first pass. Updated 16-Sep-2008: now we need
-# three invocations.
-
-build: src/allmydata/_version.py
+# It is unnecessary to have this depend on build or src/allmydata/_version.py,
+# since 'setup.py build' always updates the version.
+.PHONY: build
+build:
$(PYTHON) setup.py build
touch .built
-# 'make install' will do the following:
-# build+install tahoe (probably to /usr/lib/pythonN.N/site-packages)
-# 'make install PREFIX=/usr/local/stow/tahoe-N.N' will do the same, but to
-# a different location
+# Build OS X pkg packages.
+.PHONY: build-osx-pkg test-osx-pkg upload-osx-pkg
+build-osx-pkg: build
+ misc/build_helpers/build-osx-pkg.sh $(APPNAME)
-install: src/allmydata/_version.py
-ifdef PREFIX
- mkdir -p $(PREFIX)
- $(PYTHON) ./setup.py install --single-version-externally-managed \
- --prefix=$(PREFIX) --record=./tahoe.files
-else
- $(PYTHON) ./setup.py install --single-version-externally-managed
-endif
+test-osx-pkg:
+ $(PYTHON) misc/build_helpers/test-osx-pkg.py
+upload-osx-pkg:
+ @echo "uploading to ~tahoe-tarballs/OS-X-packages/ via flappserver"
+ @if [ "X${BB_BRANCH}" = "Xmaster" ] || [ "X${BB_BRANCH}" = "X" ]; then \
+ flappclient --furlfile ~/.tahoe-osx-pkg-upload.furl upload-file tahoe-lafs-*-osx.pkg; \
+ else \
+ echo not uploading tahoe-lafs-osx-pkg because this is not trunk but is branch \"${BB_BRANCH}\" ; \
+ fi
# TESTING
-.PHONY: signal-error-deps test test-coverage quicktest quicktest-coverage
-.PHONY: coverage-output get-old-coverage-coverage coverage-delta-output
-
-
-signal-error-deps:
- @echo
- @echo
- @echo "ERROR: Not all of Tahoe's dependencies are in place. Please see docs/install.html for help on installing dependencies."
- @echo
- @echo
- exit 1
-
-check-auto-deps:
- $(PYTHON) setup.py -q check_auto_deps || $(MAKE) signal-error-deps
-
-.checked-deps:
- $(MAKE) check-auto-deps
- touch .checked-deps
-
# you can use 'make test TEST=allmydata.test.test_introducer' to run just
# test_introducer. TEST=allmydata.test.test_client.Basic.test_permute works
# too.
TEST=allmydata
-# use 'make test TRIALARGS=--reporter=bwverbose' from buildbot, to
-# suppress the ansi color sequences
-
-test: build src/allmydata/_version.py
+# It is unnecessary to have this depend on build or src/allmydata/_version.py,
+# since 'setup.py test' always updates the version and builds before testing.
+.PHONY: test
+test:
$(PYTHON) setup.py test $(TRIALARGS) -s $(TEST)
+ touch .built
-fuse-test: .built .checked-deps
- $(RUNPP) -d contrib/fuse -p -c runtests.py
+.PHONY: check
+check: test
-test-coverage: build src/allmydata/_version.py
- rm -f .coverage
- $(PYTHON) setup.py trial --reporter=bwverbose-coverage -s $(TEST)
+.PHONY: quicktest
+quicktest: make-version
+ $(TAHOE) debug trial $(TRIALARGS) $(TEST)
-quicktest:
- $(PYTHON) misc/build_helpers/run-with-pythonpath.py trial $(TRIALARGS) $(TEST)
+# "make tmpfstest" may be a faster way of running tests on Linux. It works best when you have
+# at least 330 MiB of free physical memory (to run the whole test suite). Since it uses sudo
+# to mount/unmount the tmpfs filesystem, it might prompt for your password.
+.PHONY: tmpfstest
+tmpfstest:
+ time make _tmpfstest 'TMPDIR=$(shell mktemp -d --tmpdir=.)'
-# code-coverage: install the "coverage" package from PyPI, do "make
-# quicktest-coverage" to do a unit test run with coverage-gathering enabled,
-# then use "make coverate-output-text" for a brief report, or "make
-# coverage-output" for a pretty HTML report. Also see "make .coverage.el" and
-# misc/coding_tools/coverage.el for emacs integration.
+.PHONY: _tmpfstest
+_tmpfstest: make-version
+ sudo mount -t tmpfs -o size=400m tmpfs '$(TMPDIR)'
+ -$(TAHOE) debug trial --rterrors '--temp-directory=$(TMPDIR)/_trial_temp' $(TRIALARGS) $(TEST)
+ sudo umount '$(TMPDIR)'
+ rmdir '$(TMPDIR)'
-quicktest-coverage:
- rm -f .coverage
- $(PYTHON) misc/build_helpers/run-with-pythonpath.py trial --reporter=bwverbose-coverage $(TEST)
-# on my laptop, "quicktest" takes 239s, "quicktest-coverage" takes 304s
+
+# code coverage: install the "coverage" package from PyPI, do "make test-coverage" to
+# do a unit test run with coverage-gathering enabled, then use "make coverage-output" to
+# generate an HTML report. Also see "make .coverage.el" and misc/coding_tools/coverage.el
+# for Emacs integration.
+
+# This might need to be python-coverage on Debian-based distros.
+COVERAGE=coverage
+
+COVERAGEARGS=--branch --source=src/allmydata
# --include appeared in coverage-3.4
COVERAGE_OMIT=--include '$(CURDIR)/src/allmydata/*' --omit '$(CURDIR)/src/allmydata/test/*'
+
+.PHONY: test-coverage
+test-coverage: build
+ rm -f .coverage
+ $(TAHOE) '@$(COVERAGE)' run $(COVERAGEARGS) @tahoe debug trial $(TRIALARGS) $(TEST)
+
+.PHONY: coverage-output
coverage-output:
rm -rf coverage-html
coverage html -i -d coverage-html $(COVERAGE_OMIT)
cp .coverage coverage-html/coverage.data
@echo "now point your browser at coverage-html/index.html"
-## use these two targets to compare this coverage against the previous run.
-## The deltas only work if the old test was run in the same directory, since
-## it compares absolute filenames.
-#get-old-figleaf-coverage:
-# wget --progress=dot -O old.figleaf http://allmydata.org/tahoe-figleaf/current/figleaf.pickle
-#
-#figleaf-delta-output:
-# $(RUNPP) -p -c "misc/figleaf2html -d coverage-html -r src -x misc/figleaf.excludes -o old.figleaf"
-# cp .figleaf coverage-html/figleaf.pickle
-# @echo "now point your browser at coverage-html/index.html"
-
-.PHONY: upload-coverage .coverage.el pyflakes count-lines
-.PHONY: check-memory check-memory-once check-speed check-grid
-.PHONY: repl test-darcs-boringfile test-clean clean find-trailing-spaces
-
.coverage.el: .coverage
$(PYTHON) misc/coding_tools/coverage2el.py
-# 'upload-coverage' is meant to be run with an UPLOAD_TARGET=host:/dir setting
-ifdef UPLOAD_TARGET
-ifndef UPLOAD_HOST
-$(error UPLOAD_HOST must be set when using UPLOAD_TARGET)
-endif
-ifndef COVERAGEDIR
-$(error COVERAGEDIR must be set when using UPLOAD_TARGET)
-endif
+.PHONY: code-checks
+code-checks: build version-and-path check-interfaces check-miscaptures -find-trailing-spaces -check-umids pyflakes
-upload-coverage:
- rsync -a coverage-html/ $(UPLOAD_TARGET)
- ssh $(UPLOAD_HOST) make update-tahoe-coverage COVERAGEDIR=$(COVERAGEDIR)
-else
-upload-coverage:
- echo "this target is meant to be run with UPLOAD_TARGET=host:/path/"
- false
-endif
+.PHONY: version-and-path
+version-and-path:
+ $(TAHOE) --version-and-path
+.PHONY: check-interfaces
+check-interfaces:
+ $(TAHOE) @misc/coding_tools/check-interfaces.py 2>&1 |tee violations.txt
+ @echo
+.PHONY: check-miscaptures
+check-miscaptures:
+ $(PYTHON) misc/coding_tools/check-miscaptures.py $(SOURCES) 2>&1 |tee miscaptures.txt
+ @echo
+
+.PHONY: pyflakes
pyflakes:
- $(PYTHON) -OOu `which pyflakes` src/allmydata |sort |uniq
+ @$(PYTHON) -OOu `which pyflakes` $(SOURCES) |sort |uniq
+ @echo
+
+.PHONY: check-umids
check-umids:
- $(PYTHON) misc/coding_tools/check-umids.py `find src/allmydata -name '*.py'`
+ $(PYTHON) misc/coding_tools/check-umids.py `find $(SOURCES) -name '*.py' -not -name 'old.py'`
+ @echo
+
+.PHONY: -check-umids
+-check-umids:
+ -$(PYTHON) misc/coding_tools/check-umids.py `find $(SOURCES) -name '*.py' -not -name 'old.py'`
+ @echo
+
+.PHONY: doc-checks
+doc-checks: check-rst
+
+.PHONY: check-rst
+check-rst:
+ @for x in `find *.rst docs -name "*.rst"`; do rst2html -v $${x} >/dev/null; done 2>&1 |grep -v 'Duplicate implicit target name:'
+ @echo
+.PHONY: count-lines
count-lines:
@echo -n "files: "
- @find src -name '*.py' |grep -v /build/ |wc --lines
+ @find src -name '*.py' |grep -v /build/ |wc -l
@echo -n "lines: "
- @cat `find src -name '*.py' |grep -v /build/` |wc --lines
+ @cat `find src -name '*.py' |grep -v /build/` |wc -l
@echo -n "TODO: "
- @grep TODO `find src -name '*.py' |grep -v /build/` | wc --lines
+ @grep TODO `find src -name '*.py' |grep -v /build/` | wc -l
+ @echo -n "XXX: "
+ @grep XXX `find src -name '*.py' |grep -v /build/` | wc -l
+.PHONY: check-memory
check-memory: .built
rm -rf _test_memory
- $(RUNPP) -p -c "src/allmydata/test/check_memory.py upload"
- $(RUNPP) -p -c "src/allmydata/test/check_memory.py upload-self"
- $(RUNPP) -p -c "src/allmydata/test/check_memory.py upload-POST"
- $(RUNPP) -p -c "src/allmydata/test/check_memory.py download"
- $(RUNPP) -p -c "src/allmydata/test/check_memory.py download-GET"
- $(RUNPP) -p -c "src/allmydata/test/check_memory.py download-GET-slow"
- $(RUNPP) -p -c "src/allmydata/test/check_memory.py receive"
-
+ $(TAHOE) @src/allmydata/test/check_memory.py upload
+ $(TAHOE) @src/allmydata/test/check_memory.py upload-self
+ $(TAHOE) @src/allmydata/test/check_memory.py upload-POST
+ $(TAHOE) @src/allmydata/test/check_memory.py download
+ $(TAHOE) @src/allmydata/test/check_memory.py download-GET
+ $(TAHOE) @src/allmydata/test/check_memory.py download-GET-slow
+ $(TAHOE) @src/allmydata/test/check_memory.py receive
+
+.PHONY: check-memory-once
check-memory-once: .built
rm -rf _test_memory
- $(RUNPP) -p -c "src/allmydata/test/check_memory.py $(MODE)"
+ $(TAHOE) @src/allmydata/test/check_memory.py $(MODE)
# The check-speed target uses a pre-established client node to run a canned
# set of performance tests against a test network that is also
# The 'sleep 5' is in there to give the new client a chance to connect to its
# storageservers, since check_speed.py has no good way of doing that itself.
+.PHONY: check-speed
check-speed: .built
if [ -z '$(TESTCLIENTDIR)' ]; then exit 1; fi
@echo "stopping any leftover client code"
- -$(PYTHON) bin/tahoe stop $(TESTCLIENTDIR)
- $(PYTHON) bin/tahoe start $(TESTCLIENTDIR)
+ -$(TAHOE) stop $(TESTCLIENTDIR)
+ $(TAHOE) start $(TESTCLIENTDIR)
sleep 5
- $(PYTHON) src/allmydata/test/check_speed.py $(TESTCLIENTDIR)
- $(PYTHON) bin/tahoe stop $(TESTCLIENTDIR)
+ $(TAHOE) @src/allmydata/test/check_speed.py $(TESTCLIENTDIR)
+ $(TAHOE) stop $(TESTCLIENTDIR)
# The check-grid target also uses a pre-established client node, along with a
# long-term directory that contains some well-known files. See the docstring
# in src/allmydata/test/check_grid.py to see how to set this up.
+.PHONY: check-grid
check-grid: .built
if [ -z '$(TESTCLIENTDIR)' ]; then exit 1; fi
- $(PYTHON) src/allmydata/test/check_grid.py $(TESTCLIENTDIR) bin/tahoe
+ $(TAHOE) @src/allmydata/test/check_grid.py $(TESTCLIENTDIR) bin/tahoe
+.PHONY: bench-dirnode
bench-dirnode: .built
- $(RUNPP) -p -c src/allmydata/test/bench_dirnode.py
+ $(TAHOE) @src/allmydata/test/bench_dirnode.py
+
+# the provisioning tool runs as a stand-alone webapp server
+.PHONY: run-provisioning-tool
+run-provisioning-tool: .built
+ $(TAHOE) @misc/operations_helpers/provisioning/run.py
# 'make repl' is a simple-to-type command to get a Python interpreter loop
# from which you can type 'import allmydata'
+.PHONY: repl
repl:
- $(RUNPP) -p
+ $(TAHOE) debug repl
-test-darcs-boringfile:
+.PHONY: test-get-ignore
+test-git-ignore:
$(MAKE)
- $(PYTHON) misc/build_helpers/test-darcs-boringfile.py
+ $(PYTHON) misc/build_helpers/test-git-ignore.py
+.PHONY: test-clean
test-clean:
- find . |grep -vEe "_darcs|allfiles.tmp|src/allmydata/_(version|appname).py" |sort >allfiles.tmp.old
+ find . |grep -vEe "allfiles.tmp|src/allmydata/_(version|appname).py" |sort >allfiles.tmp.old
$(MAKE)
- $(MAKE) clean
- find . |grep -vEe "_darcs|allfiles.tmp|src/allmydata/_(version|appname).py" |sort >allfiles.tmp.new
+ $(MAKE) distclean
+ find . |grep -vEe "allfiles.tmp|src/allmydata/_(version|appname).py" |sort >allfiles.tmp.new
diff allfiles.tmp.old allfiles.tmp.new
+# It would be nice if 'make clean' deleted any automatically-generated
+# _version.py too, so that 'make clean; make all' could be useable as a
+# "what the heck is going on, get me back to a clean state', but we need
+# 'make clean' to work on non-checkout trees without destroying useful information.
+# Use 'make distclean' instead to delete all generated files.
+.PHONY: clean
clean:
- rm -rf build _trial_temp _test_memory .checked-deps .built
+ rm -rf build _trial_temp _test_memory .built
rm -f `find src *.egg -name '*.so' -or -name '*.pyc'`
- rm -rf src/allmydata_tahoe.egg-info
rm -rf support dist
- rm -rf `ls -d *.egg | grep -vEe"setuptools-|setuptools_trial-|darcsver-"`
+ rm -rf `ls -d *.egg | grep -vEe"setuptools-|setuptools_darcs-|darcsver-"`
rm -rf *.pyc
rm -rf misc/dependencies/build misc/dependencies/temp
rm -rf misc/dependencies/tahoe_deps.egg-info
- rm -f bin/tahoe bin/tahoe-script.py
+ rm -f bin/tahoe bin/tahoe.pyscript
+ rm -f *.pkg
+
+.PHONY: distclean
+distclean: clean
+ rm -rf src/allmydata_tahoe.egg-info
+ rm -f src/allmydata/_version.py
+ rm -f src/allmydata/_appname.py
+
+.PHONY: find-trailing-spaces
find-trailing-spaces:
- $(PYTHON) misc/coding_tools/find-trailing-spaces.py -r src
+ $(PYTHON) misc/coding_tools/find-trailing-spaces.py -r $(SOURCES)
+ @echo
+
+.PHONY: -find-trailing-spaces
+-find-trailing-spaces:
+ -$(PYTHON) misc/coding_tools/find-trailing-spaces.py -r $(SOURCES)
+ @echo
# The test-desert-island target grabs the tahoe-deps tarball, unpacks it,
# does a build, then asserts that the build did not try to download anything
# as it ran. Invoke this on a new tree, or after a 'clean', to make sure the
# support/lib/ directory is gone.
+.PHONY: fetch-and-unpack-deps
fetch-and-unpack-deps:
- test -f tahoe-deps.tar.gz || wget http://allmydata.org/source/tahoe/deps/tahoe-deps.tar.gz
+ test -f tahoe-deps.tar.gz || wget https://tahoe-lafs.org/source/tahoe-lafs/deps/tahoe-lafs-deps.tar.gz
rm -rf tahoe-deps
- tar xzf tahoe-deps.tar.gz
+ tar xzf tahoe-lafs-deps.tar.gz
+.PHONY: test-desert-island
test-desert-island:
$(MAKE) fetch-and-unpack-deps
$(MAKE) 2>&1 | tee make.out
$(PYTHON) misc/build_helpers/check-build.py make.out no-downloads
+.PHONY: test-pip-install
+test-pip-install:
+ $(PYTHON) misc/build_helpers/test-pip-install.py
# TARBALL GENERATION
-.PHONY: tarballs upload-tarballs
+.PHONY: tarballs
tarballs:
$(MAKE) make-version
$(PYTHON) setup.py sdist --formats=bztar,gztar,zip
$(PYTHON) setup.py sdist --sumo --formats=bztar,gztar,zip
+.PHONY: upload-tarballs
upload-tarballs:
- @if [ "X${BB_BRANCH}" == "X" ]; then for f in dist/allmydata-tahoe-*; do flappclient --furlfile ~/.tahoe-tarball-upload.furl upload-file $$f; done ; else echo not uploading tarballs because this is not trunk but is branch \"${BB_BRANCH}\" ; fi
-
-# DEBIAN PACKAGING
-
-VER=$(shell $(PYTHON) misc/build_helpers/get-version.py)
-DEBCOMMENTS="'make deb' build"
-
-show-version:
- @echo $(VER)
-show-pp:
- @echo $(PP)
-
-.PHONY: setup-deb deb-ARCH is-known-debian-arch
-.PHONY: deb-etch deb-lenny deb-sid
-.PHONY: deb-edgy deb-feisty deb-gutsy deb-hardy deb-intrepid deb-jaunty
-
-# we use misc/debian_helpers/$TAHOE_ARCH/debian
-
-deb-etch: # py2.4
- $(MAKE) deb-ARCH ARCH=etch TAHOE_ARCH=etch
-deb-lenny: # py2.5
- $(MAKE) deb-ARCH ARCH=lenny TAHOE_ARCH=lenny
-deb-sid:
- $(MAKE) deb-ARCH ARCH=sid TAHOE_ARCH=sid
-
-deb-edgy: # py2.4
- $(MAKE) deb-ARCH ARCH=edgy TAHOE_ARCH=etch
-deb-feisty: # py2.5
- $(MAKE) deb-ARCH ARCH=feisty TAHOE_ARCH=lenny
-deb-gutsy: # py2.5
- $(MAKE) deb-ARCH ARCH=gutsy TAHOE_ARCH=lenny
-deb-hardy: # py2.5
- $(MAKE) deb-ARCH ARCH=hardy TAHOE_ARCH=lenny
-deb-intrepid: # py2.5
- $(MAKE) deb-ARCH ARCH=intrepid TAHOE_ARCH=lenny
-deb-jaunty: # py2.6
- $(MAKE) deb-ARCH ARCH=jaunty TAHOE_ARCH=lenny
-
-
-
-# we know how to handle the following debian architectures
-KNOWN_DEBIAN_ARCHES := etch lenny sid edgy feisty gutsy hardy intrepid jaunty
-
-ifeq ($(findstring x-$(ARCH)-x,$(foreach arch,$(KNOWN_DEBIAN_ARCHES),"x-$(arch)-x")),)
-is-known-debian-arch:
- @echo "ARCH must be set when using setup-deb or deb-ARCH"
- @echo "I know how to handle:" $(KNOWN_DEBIAN_ARCHES)
- false
-else
-is-known-debian-arch:
- true
-endif
-
-ifndef TAHOE_ARCH
-TAHOE_ARCH=$(ARCH)
-endif
-
-setup-deb: is-known-debian-arch
- rm -f debian
- ln -s misc/debian_helpers/$(TAHOE_ARCH)/debian debian
- chmod +x debian/rules
-
-# etch (current debian stable) has python-simplejson-1.3, which doesn't
-# support indent=
-# sid (debian unstable) currently has python-simplejson 1.7.1
-# edgy has 1.3, which doesn't support indent=
-# feisty has 1.4, which supports indent= but emits a deprecation warning
-# gutsy has 1.7.1
-#
-# we need 1.4 or newer
-
-deb-ARCH: is-known-debian-arch setup-deb
- fakeroot debian/rules binary
- @echo
- @echo "The newly built .deb packages are in the parent directory from here."
-
-.PHONY: increment-deb-version
-.PHONY: deb-etch-head deb-lenny-head deb-sid-head
-.PHONY: deb-edgy-head deb-feisty-head deb-gutsy-head deb-hardy-head deb-intrepid-head deb-jaunty-head
-
-# The buildbot runs the following targets after each change, to produce
-# up-to-date tahoe .debs. These steps do not create .debs for anything else.
-
-increment-deb-version: make-version
- debchange --newversion $(VER) $(DEBCOMMENTS)
-deb-etch-head:
- $(MAKE) setup-deb ARCH=etch TAHOE_ARCH=etch
- $(MAKE) increment-deb-version
- fakeroot debian/rules binary
-deb-lenny-head:
- $(MAKE) setup-deb ARCH=lenny TAHOE_ARCH=lenny
- $(MAKE) increment-deb-version
- fakeroot debian/rules binary
-deb-sid-head:
- $(MAKE) setup-deb ARCH=sid TAHOE_ARCH=lenny
- $(MAKE) increment-deb-version
- fakeroot debian/rules binary
-
-deb-edgy-head:
- $(MAKE) setup-deb ARCH=edgy TAHOE_ARCH=etch
- $(MAKE) increment-deb-version
- fakeroot debian/rules binary
-deb-feisty-head:
- $(MAKE) setup-deb ARCH=feisty TAHOE_ARCH=lenny
- $(MAKE) increment-deb-version
- fakeroot debian/rules binary
-deb-gutsy-head:
- $(MAKE) setup-deb ARCH=gutsy TAHOE_ARCH=lenny
- $(MAKE) increment-deb-version
- fakeroot debian/rules binary
-deb-hardy-head:
- $(MAKE) setup-deb ARCH=hardy TAHOE_ARCH=lenny
- $(MAKE) increment-deb-version
- fakeroot debian/rules binary
-deb-intrepid-head:
- $(MAKE) setup-deb ARCH=intrepid TAHOE_ARCH=lenny
- $(MAKE) increment-deb-version
- fakeroot debian/rules binary
-deb-jaunty-head:
- $(MAKE) setup-deb ARCH=jaunty TAHOE_ARCH=lenny
- $(MAKE) increment-deb-version
- fakeroot debian/rules binary
-
-# new experimental debian-packaging-building target
-.PHONY: EXPERIMENTAL-deb
-EXPERIMENTAL-deb: is-known-debian-arch
- $(PYTHON) misc/build_helpers/build-deb.py $(ARCH)
+ @if [ "X${BB_BRANCH}" = "Xmaster" ] || [ "X${BB_BRANCH}" = "X" ]; then for f in dist/$(APPNAME)-*; do flappclient --furlfile ~/.tahoe-tarball-upload.furl upload-file $$f; done ; else echo not uploading tarballs because this is not trunk but is branch \"${BB_BRANCH}\" ; fi
projects / tahoe-lafs / tahoe-lafs.git / blobdiff