From b952d9dc1b755e33da94a12a0acac060a613e6f3 Mon Sep 17 00:00:00 2001
From: Brian Warner <warner@lothar.com>
Date: Sun, 30 Oct 2011 10:44:11 -0700
Subject: [PATCH] quickstart.rst: remove trailing whitespace

---
 docs/quickstart.rst | 76 ++++++++++++++++++++++-----------------------
 1 file changed, 38 insertions(+), 38 deletions(-)

diff --git a/docs/quickstart.rst b/docs/quickstart.rst
index 6ecc987f..35d44761 100644
--- a/docs/quickstart.rst
+++ b/docs/quickstart.rst
@@ -2,40 +2,40 @@
 Getting Tahoe-LAFS
 ==================
 
-Welcome to `the Tahoe-LAFS project <https://tahoe-lafs.org>`_, a secure, 
-decentralized, fault-tolerant storage system. `About Tahoe-LAFS 
+Welcome to `the Tahoe-LAFS project <https://tahoe-lafs.org>`_, a secure,
+decentralized, fault-tolerant storage system. `About Tahoe-LAFS
 <about.rst>`_.
 
 How To Get Tahoe-LAFS
 =====================
 
-This procedure has been verified to work on Windows, Mac, OpenSolaris, 
-and too many flavors of Linux and of BSD to list.  It's likely to work 
+This procedure has been verified to work on Windows, Mac, OpenSolaris,
+and too many flavors of Linux and of BSD to list. It's likely to work
 on other platforms.
 
 In Case Of Trouble
 ------------------
 
-There are a few 3rd party libraries that Tahoe-LAFS depends on that 
-might not be easy to set up on your platform.  If the following 
-instructions don't Just Work without any further effort on your part, 
-then please write to `the tahoe-dev mailing list 
-<https://tahoe-lafs.org/cgi-bin/mailman/listinfo/tahoe-dev>`_ where 
-friendly hackers will help you out. You might also find clues in the 
+There are a few 3rd party libraries that Tahoe-LAFS depends on that
+might not be easy to set up on your platform. If the following
+instructions don't Just Work without any further effort on your part,
+then please write to `the tahoe-dev mailing list
+<https://tahoe-lafs.org/cgi-bin/mailman/listinfo/tahoe-dev>`_ where
+friendly hackers will help you out. You might also find clues in the
 `Advanced Installation`_ section described below.
 
 Install Python
 --------------
 
-Check if you already have an adequate version of Python installed by 
-running ``python -V``.  Python v2.4 (v2.4.4 or greater), Python v2.5, 
-Python v2.6, or Python v2.7 will work. Python v3 does not work. On 
-Windows, we recommend the use of Python v2.6 (native, not Cygwin). If 
-you don't have one of these versions of Python installed, then follow 
-the instructions on `the Python download page 
-<http://www.python.org/download/releases/2.6.6/>`_ to download and 
-install Python v2.6. Make sure that the path to the installation 
-directory has no spaces in it (e.g. on Windows, do not install Python 
+Check if you already have an adequate version of Python installed by
+running ``python -V``. Python v2.4 (v2.4.4 or greater), Python v2.5,
+Python v2.6, or Python v2.7 will work. Python v3 does not work. On
+Windows, we recommend the use of Python v2.6 (native, not Cygwin). If
+you don't have one of these versions of Python installed, then follow
+the instructions on `the Python download page
+<http://www.python.org/download/releases/2.6.6/>`_ to download and
+install Python v2.6. Make sure that the path to the installation
+directory has no spaces in it (e.g. on Windows, do not install Python
 in the "Program Files" directory).
 
 Get Tahoe-LAFS
@@ -49,39 +49,39 @@ Set Up Tahoe-LAFS
 
 Unpack the zip file and cd into the top-level directory.
 
-Run ``python setup.py build`` to generate the ``tahoe`` executable in a 
-subdirectory of the current directory named ``bin``. This will download 
+Run ``python setup.py build`` to generate the ``tahoe`` executable in a
+subdirectory of the current directory named ``bin``. This will download
 and build anything you need from various websites.
 
-On Windows, the ``build`` step might tell you to open a new Command 
-Prompt (or, on XP and earlier, to log out and back in again). This is 
-needed the first time you set up Tahoe-LAFS on a particular 
+On Windows, the ``build`` step might tell you to open a new Command
+Prompt (or, on XP and earlier, to log out and back in again). This is
+needed the first time you set up Tahoe-LAFS on a particular
 installation of Windows.
 
-Optionally run ``python setup.py test`` to verify that it passes all 
-of its self-tests.
+Optionally run ``python setup.py test`` to verify that it passes all of
+its self-tests.
 
-Run ``bin/tahoe --version`` (on Windows, ``bin\tahoe --version``) to 
+Run ``bin/tahoe --version`` (on Windows, ``bin\tahoe --version``) to
 verify that the executable tool prints out the right version number.
 
 Run Tahoe-LAFS
 --------------
 
-Now you are ready to deploy a decentralized filesystem.  The ``tahoe`` 
-executable in the ``bin`` directory can configure and launch your 
-Tahoe-LAFS nodes.  See `running.rst <running.rst>`_ for instructions on 
+Now you are ready to deploy a decentralized filesystem. The ``tahoe``
+executable in the ``bin`` directory can configure and launch your
+Tahoe-LAFS nodes. See `running.rst <running.rst>`_ for instructions on
 how to do that.
 
 Advanced Installation
 ---------------------
 
-For optional features such as tighter integration with your operating 
-system's package manager, you can see the `AdvancedInstall 
-<https://tahoe-lafs.org/trac/tahoe/wiki/AdvancedInstall>`_ wiki page. 
-The options on that page are not necessary to use Tahoe-LAFS and can be 
-complicated, so we do not recommend following that page unless you have 
-unusual requirements for advanced optional features. For most people, 
-you should first follow the instructions on this page, and if that 
-doesn't work then ask for help by writing to `the tahoe-dev mailing 
+For optional features such as tighter integration with your operating
+system's package manager, you can see the `AdvancedInstall
+<https://tahoe-lafs.org/trac/tahoe/wiki/AdvancedInstall>`_ wiki page.
+The options on that page are not necessary to use Tahoe-LAFS and can be
+complicated, so we do not recommend following that page unless you have
+unusual requirements for advanced optional features. For most people,
+you should first follow the instructions on this page, and if that
+doesn't work then ask for help by writing to `the tahoe-dev mailing
 list <https://tahoe-lafs.org/cgi-bin/mailman/listinfo/tahoe-dev>`_.
 
-- 
2.45.2