From: David-Sarah Hopwood Date: Sun, 18 Nov 2012 02:52:40 +0000 (+0000) Subject: Asyncify crawlers. Note that this breaks tests for the LeaseCrawler X-Git-Url: https://git.rkrishnan.org/components/com_hotproperty//%22%3C?a=commitdiff_plain;h=9b0f0d3b329cab008eff3ea7fde5b4c2fbffa863;p=tahoe-lafs%2Ftahoe-lafs.git Asyncify crawlers. Note that this breaks tests for the LeaseCrawler (which is going away, to be replaced by the AccountingCrawler). Signed-off-by: David-Sarah Hopwood --- diff --git a/src/allmydata/storage/crawler.py b/src/allmydata/storage/crawler.py index 438dd5e3..05b0ef40 100644 --- a/src/allmydata/storage/crawler.py +++ b/src/allmydata/storage/crawler.py @@ -1,15 +1,20 @@ import os, time, struct import cPickle as pickle -from twisted.internet import reactor + +from twisted.internet import defer, reactor from twisted.application import service + from allmydata.storage.common import si_b2a from allmydata.util import fileutil +from allmydata.util.deferredutil import HookMixin, async_iterate + class TimeSliceExceeded(Exception): pass -class ShareCrawler(service.MultiService): + +class ShareCrawler(HookMixin, service.MultiService): """A ShareCrawler subclass is attached to a StorageServer, and periodically walks all of its shares, processing each one in some fashion. This crawl is rate-limited, to reduce the IO burden on the host, @@ -17,9 +22,9 @@ class ShareCrawler(service.MultiService): million files, which can take hours or days to read. Once the crawler starts a cycle, it will proceed at a rate limited by the - allowed_cpu_percentage= and cpu_slice= parameters: yielding the reactor + allowed_cpu_proportion= and cpu_slice= parameters: yielding the reactor after it has worked for 'cpu_slice' seconds, and not resuming right away, - always trying to use less than 'allowed_cpu_percentage'. + always trying to use less than 'allowed_cpu_proportion'. Once the crawler finishes a cycle, it will put off starting the next one long enough to ensure that 'minimum_cycle_time' elapses between the start @@ -61,14 +66,14 @@ class ShareCrawler(service.MultiService): slow_start = 300 # don't start crawling for 5 minutes after startup # all three of these can be changed at any time - allowed_cpu_percentage = .10 # use up to 10% of the CPU, on average + allowed_cpu_proportion = .10 # use up to 10% of the CPU, on average cpu_slice = 1.0 # use up to 1.0 seconds before yielding minimum_cycle_time = 300 # don't run a cycle faster than this - def __init__(self, server, statefile, allowed_cpu_percentage=None): + def __init__(self, server, statefile, allowed_cpu_proportion=None): service.MultiService.__init__(self) - if allowed_cpu_percentage is not None: - self.allowed_cpu_percentage = allowed_cpu_percentage + if allowed_cpu_proportion is not None: + self.allowed_cpu_proportion = allowed_cpu_proportion self.server = server self.sharedir = server.sharedir self.statefile = statefile @@ -85,6 +90,9 @@ class ShareCrawler(service.MultiService): self.last_cycle_elapsed_time = None self.load_state() + # used by tests + self._hooks = {'after_prefix': None, 'after_cycle': None, 'yield': None} + def minus_or_none(self, a, b): if a is None: return None @@ -257,39 +265,46 @@ class ShareCrawler(service.MultiService): self.sleeping_between_cycles = False self.current_sleep_time = None self.next_wake_time = None - try: - self.start_current_prefix(start_slice) - finished_cycle = True - except TimeSliceExceeded: - finished_cycle = False - self.save_state() - if not self.running: - # someone might have used stopService() to shut us down - return - # either we finished a whole cycle, or we ran out of time - now = time.time() - this_slice = now - start_slice - # this_slice/(this_slice+sleep_time) = percentage - # this_slice/percentage = this_slice+sleep_time - # sleep_time = (this_slice/percentage) - this_slice - sleep_time = (this_slice / self.allowed_cpu_percentage) - this_slice - # if the math gets weird, or a timequake happens, don't sleep - # forever. Note that this means that, while a cycle is running, we - # will process at least one bucket every 5 minutes, no matter how - # long that bucket takes. - sleep_time = max(0.0, min(sleep_time, 299)) - if finished_cycle: - # how long should we sleep between cycles? Don't run faster than - # allowed_cpu_percentage says, but also run faster than - # minimum_cycle_time - self.sleeping_between_cycles = True - sleep_time = max(sleep_time, self.minimum_cycle_time) - else: - self.sleeping_between_cycles = False - self.current_sleep_time = sleep_time # for status page - self.next_wake_time = now + sleep_time - self.yielding(sleep_time) - self.timer = reactor.callLater(sleep_time, self.start_slice) + + d = self.start_current_prefix(start_slice) + def _err(f): + f.trap(TimeSliceExceeded) + return False + def _ok(ign): + return True + d.addCallbacks(_ok, _err) + def _done(finished_cycle): + self.save_state() + if not self.running: + # someone might have used stopService() to shut us down + return + # either we finished a whole cycle, or we ran out of time + now = time.time() + this_slice = now - start_slice + # this_slice/(this_slice+sleep_time) = percentage + # this_slice/percentage = this_slice+sleep_time + # sleep_time = (this_slice/percentage) - this_slice + sleep_time = (this_slice / self.allowed_cpu_proportion) - this_slice + # if the math gets weird, or a timequake happens, don't sleep + # forever. Note that this means that, while a cycle is running, we + # will process at least one bucket every 5 minutes, no matter how + # long that bucket takes. + sleep_time = max(0.0, min(sleep_time, 299)) + if finished_cycle: + # how long should we sleep between cycles? Don't run faster than + # allowed_cpu_proportion says, but also run faster than + # minimum_cycle_time + self.sleeping_between_cycles = True + sleep_time = max(sleep_time, self.minimum_cycle_time) + else: + self.sleeping_between_cycles = False + self.current_sleep_time = sleep_time # for status page + self.next_wake_time = now + sleep_time + self.yielding(sleep_time) + self.timer = reactor.callLater(sleep_time, self.start_slice) + d.addCallback(_done) + d.addBoth(self._call_hook, 'yield') + return d def start_current_prefix(self, start_slice): state = self.state @@ -303,21 +318,47 @@ class ShareCrawler(service.MultiService): self.started_cycle(state["current-cycle"]) cycle = state["current-cycle"] - for i in range(self.last_complete_prefix_index+1, len(self.prefixes)): - # if we want to yield earlier, just raise TimeSliceExceeded() - prefix = self.prefixes[i] - prefixdir = os.path.join(self.sharedir, prefix) - if i == self.bucket_cache[0]: - buckets = self.bucket_cache[1] - else: - try: - buckets = os.listdir(prefixdir) - buckets.sort() - except EnvironmentError: - buckets = [] - self.bucket_cache = (i, buckets) - self.process_prefixdir(cycle, prefix, prefixdir, - buckets, start_slice) + def _prefix_loop(i): + d2 = self._do_prefix(cycle, i, start_slice) + d2.addBoth(self._call_hook, 'after_prefix') + d2.addCallback(lambda ign: True) + return d2 + d = async_iterate(_prefix_loop, xrange(self.last_complete_prefix_index + 1, len(self.prefixes))) + + def _cycle_done(ign): + # yay! we finished the whole cycle + self.last_complete_prefix_index = -1 + self.last_prefix_finished_time = None # don't include the sleep + now = time.time() + if self.last_cycle_started_time is not None: + self.last_cycle_elapsed_time = now - self.last_cycle_started_time + state["last-complete-bucket"] = None + state["last-cycle-finished"] = cycle + state["current-cycle"] = None + + self.finished_cycle(cycle) + self.save_state() + return cycle + d.addCallback(_cycle_done) + d.addBoth(self._call_hook, 'after_cycle') + return d + + def _do_prefix(self, cycle, i, start_slice): + prefix = self.prefixes[i] + prefixdir = os.path.join(self.sharedir, prefix) + if i == self.bucket_cache[0]: + buckets = self.bucket_cache[1] + else: + try: + buckets = os.listdir(prefixdir) + buckets.sort() + except EnvironmentError: + buckets = [] + self.bucket_cache = (i, buckets) + + d = defer.maybeDeferred(self.process_prefixdir, + cycle, prefix, prefixdir, buckets, start_slice) + def _done(ign): self.last_complete_prefix_index = i now = time.time() @@ -327,24 +368,19 @@ class ShareCrawler(service.MultiService): self.last_prefix_finished_time = now self.finished_prefix(cycle, prefix) + if time.time() >= start_slice + self.cpu_slice: raise TimeSliceExceeded() - # yay! we finished the whole cycle - self.last_complete_prefix_index = -1 - self.last_prefix_finished_time = None # don't include the sleep - now = time.time() - if self.last_cycle_started_time is not None: - self.last_cycle_elapsed_time = now - self.last_cycle_started_time - state["last-complete-bucket"] = None - state["last-cycle-finished"] = cycle - state["current-cycle"] = None - self.finished_cycle(cycle) - self.save_state() + return prefix + d.addCallback(_done) + return d def process_prefixdir(self, cycle, prefix, prefixdir, buckets, start_slice): """This gets a list of bucket names (i.e. storage index strings, base32-encoded) in sorted order. + FIXME: it would probably make more sense for the storage indices + to be binary. You can override this if your crawler doesn't care about the actual shares, for example a crawler which merely keeps track of how many @@ -387,7 +423,7 @@ class ShareCrawler(service.MultiService): process_bucket() method. This will reduce the maximum duplicated work to one bucket per SIGKILL. It will also add overhead, probably 1-20ms per bucket (and some disk writes), which will count against your - allowed_cpu_percentage, and which may be considerable if + allowed_cpu_proportion, and which may be considerable if process_bucket() runs quickly. This method is for subclasses to override. No upcall is necessary. diff --git a/src/allmydata/test/common.py b/src/allmydata/test/common.py index 6bf2f974..311a82c6 100644 --- a/src/allmydata/test/common.py +++ b/src/allmydata/test/common.py @@ -430,6 +430,34 @@ def create_mutable_filenode(contents, mdmf=False, all_contents=None): return filenode +class CrawlerTestMixin: + def _wait_for_yield(self, res, crawler): + """ + Wait for the crawler to yield. This should be called at the end of a test + so that we leave a clean reactor. + """ + if isinstance(res, failure.Failure): + print res + d = crawler.set_hook('yield') + d.addCallback(lambda ign: res) + return d + + def _after_prefix(self, prefix, target_prefix, crawler): + """ + Wait for the crawler to reach a given target_prefix. Return a deferred + for the crawler state at that point. + """ + if prefix != target_prefix: + d = crawler.set_hook('after_prefix') + d.addCallback(self._after_prefix, target_prefix, crawler) + return d + + crawler.save_state() + state = crawler.get_state() + self.failUnlessEqual(prefix, state["last-complete-prefix"]) + return defer.succeed(state) + + class LoggingServiceParent(service.MultiService): def log(self, *args, **kwargs): return log.msg(*args, **kwargs) diff --git a/src/allmydata/test/test_crawler.py b/src/allmydata/test/test_crawler.py index c4aa9914..7f48a2c0 100644 --- a/src/allmydata/test/test_crawler.py +++ b/src/allmydata/test/test_crawler.py @@ -4,52 +4,32 @@ import os.path from twisted.trial import unittest from twisted.application import service from twisted.internet import defer -from foolscap.api import eventually, fireEventually +from foolscap.api import fireEventually -from allmydata.util import fileutil, hashutil, pollmixin +from allmydata.util import fileutil, hashutil from allmydata.storage.server import StorageServer, si_b2a -from allmydata.storage.crawler import ShareCrawler, TimeSliceExceeded +from allmydata.storage.crawler import ShareCrawler from allmydata.test.test_storage import FakeCanary +from allmydata.test.common import CrawlerTestMixin from allmydata.test.common_util import StallMixin -class BucketEnumeratingCrawler(ShareCrawler): - cpu_slice = 500 # make sure it can complete in a single slice - slow_start = 0 - def __init__(self, *args, **kwargs): - ShareCrawler.__init__(self, *args, **kwargs) - self.all_buckets = [] - self.finished_d = defer.Deferred() - def process_bucket(self, cycle, prefix, prefixdir, storage_index_b32): - self.all_buckets.append(storage_index_b32) - def finished_cycle(self, cycle): - eventually(self.finished_d.callback, None) -class PacedCrawler(ShareCrawler): +class EnumeratingCrawler(ShareCrawler): cpu_slice = 500 # make sure it can complete in a single slice slow_start = 0 + def __init__(self, *args, **kwargs): ShareCrawler.__init__(self, *args, **kwargs) - self.countdown = 6 - self.all_buckets = [] - self.finished_d = defer.Deferred() - self.yield_cb = None + self.sharesets = [] + def process_bucket(self, cycle, prefix, prefixdir, storage_index_b32): - self.all_buckets.append(storage_index_b32) - self.countdown -= 1 - if self.countdown == 0: - # force a timeout. We restore it in yielding() - self.cpu_slice = -1.0 - def yielding(self, sleep_time): - self.cpu_slice = 500 - if self.yield_cb: - self.yield_cb() - def finished_cycle(self, cycle): - eventually(self.finished_d.callback, None) + self.sharesets.append(storage_index_b32) + class ConsumingCrawler(ShareCrawler): cpu_slice = 0.5 - allowed_cpu_percentage = 0.5 + allowed_cpu_proportion = 0.5 minimum_cycle_time = 0 slow_start = 0 @@ -58,31 +38,22 @@ class ConsumingCrawler(ShareCrawler): self.accumulated = 0.0 self.cycles = 0 self.last_yield = 0.0 + def process_bucket(self, cycle, prefix, prefixdir, storage_index_b32): start = time.time() time.sleep(0.05) elapsed = time.time() - start self.accumulated += elapsed self.last_yield += elapsed + def finished_cycle(self, cycle): self.cycles += 1 + def yielding(self, sleep_time): self.last_yield = 0.0 -class OneShotCrawler(ShareCrawler): - cpu_slice = 500 # make sure it can complete in a single slice - slow_start = 0 - def __init__(self, *args, **kwargs): - ShareCrawler.__init__(self, *args, **kwargs) - self.counter = 0 - self.finished_d = defer.Deferred() - def process_bucket(self, cycle, prefix, prefixdir, storage_index_b32): - self.counter += 1 - def finished_cycle(self, cycle): - self.finished_d.callback(None) - self.disownServiceParent() -class Basic(unittest.TestCase, StallMixin, pollmixin.PollMixin): +class Basic(unittest.TestCase, StallMixin, CrawlerTestMixin): def setUp(self): self.s = service.MultiService() self.s.startService() @@ -97,6 +68,14 @@ class Basic(unittest.TestCase, StallMixin, pollmixin.PollMixin): def cs(self, i, serverid): return hashutil.bucket_cancel_secret_hash(str(i), serverid) + def create(self, basedir): + self.basedir = basedir + fileutil.make_dirs(basedir) + self.serverid = "\x00" * 20 + server = StorageServer(basedir, self.serverid) + server.setServiceParent(self.s) + return server + def write(self, i, ss, serverid, tail=0): si = self.si(i) si = si[:-1] + chr(tail) @@ -108,46 +87,13 @@ class Basic(unittest.TestCase, StallMixin, pollmixin.PollMixin): made[0].remote_close() return si_b2a(si) - def test_immediate(self): - self.basedir = "crawler/Basic/immediate" - fileutil.make_dirs(self.basedir) - serverid = "\x00" * 20 - ss = StorageServer(self.basedir, serverid) - ss.setServiceParent(self.s) - - sis = [self.write(i, ss, serverid) for i in range(10)] - statefile = os.path.join(self.basedir, "statefile") - - c = BucketEnumeratingCrawler(ss, statefile, allowed_cpu_percentage=.1) - c.load_state() - - c.start_current_prefix(time.time()) - self.failUnlessEqual(sorted(sis), sorted(c.all_buckets)) - - # make sure the statefile has been returned to the starting point - c.finished_d = defer.Deferred() - c.all_buckets = [] - c.start_current_prefix(time.time()) - self.failUnlessEqual(sorted(sis), sorted(c.all_buckets)) - - # check that a new crawler picks up on the state file properly - c2 = BucketEnumeratingCrawler(ss, statefile) - c2.load_state() - - c2.start_current_prefix(time.time()) - self.failUnlessEqual(sorted(sis), sorted(c2.all_buckets)) - def test_service(self): - self.basedir = "crawler/Basic/service" - fileutil.make_dirs(self.basedir) - serverid = "\x00" * 20 - ss = StorageServer(self.basedir, serverid) - ss.setServiceParent(self.s) + ss = self.create("crawler/Basic/service") - sis = [self.write(i, ss, serverid) for i in range(10)] + sis = [self.write(i, ss, self.serverid) for i in range(10)] statefile = os.path.join(self.basedir, "statefile") - c = BucketEnumeratingCrawler(ss, statefile) + c = EnumeratingCrawler(ss, statefile) c.setServiceParent(self.s) # it should be legal to call get_state() and get_progress() right @@ -159,196 +105,56 @@ class Basic(unittest.TestCase, StallMixin, pollmixin.PollMixin): self.failUnlessEqual(s["current-cycle"], None) self.failUnlessEqual(p["cycle-in-progress"], False) - d = c.finished_d - def _check(ignored): - self.failUnlessEqual(sorted(sis), sorted(c.all_buckets)) - d.addCallback(_check) - return d - - def test_paced(self): - self.basedir = "crawler/Basic/paced" - fileutil.make_dirs(self.basedir) - serverid = "\x00" * 20 - ss = StorageServer(self.basedir, serverid) - ss.setServiceParent(self.s) - - # put four buckets in each prefixdir - sis = [] - for i in range(10): - for tail in range(4): - sis.append(self.write(i, ss, serverid, tail)) - - statefile = os.path.join(self.basedir, "statefile") - - c = PacedCrawler(ss, statefile) - c.load_state() - try: - c.start_current_prefix(time.time()) - except TimeSliceExceeded: - pass - # that should stop in the middle of one of the buckets. Since we - # aren't using its normal scheduler, we have to save its state - # manually. - c.save_state() - c.cpu_slice = PacedCrawler.cpu_slice - self.failUnlessEqual(len(c.all_buckets), 6) - - c.start_current_prefix(time.time()) # finish it - self.failUnlessEqual(len(sis), len(c.all_buckets)) - self.failUnlessEqual(sorted(sis), sorted(c.all_buckets)) - - # make sure the statefile has been returned to the starting point - c.finished_d = defer.Deferred() - c.all_buckets = [] - c.start_current_prefix(time.time()) - self.failUnlessEqual(sorted(sis), sorted(c.all_buckets)) - del c - - # start a new crawler, it should start from the beginning - c = PacedCrawler(ss, statefile) - c.load_state() - try: - c.start_current_prefix(time.time()) - except TimeSliceExceeded: - pass - # that should stop in the middle of one of the buckets. Since we - # aren't using its normal scheduler, we have to save its state - # manually. - c.save_state() - c.cpu_slice = PacedCrawler.cpu_slice - - # a third crawler should pick up from where it left off - c2 = PacedCrawler(ss, statefile) - c2.all_buckets = c.all_buckets[:] - c2.load_state() - c2.countdown = -1 - c2.start_current_prefix(time.time()) - self.failUnlessEqual(len(sis), len(c2.all_buckets)) - self.failUnlessEqual(sorted(sis), sorted(c2.all_buckets)) - del c, c2 - - # now stop it at the end of a bucket (countdown=4), to exercise a - # different place that checks the time - c = PacedCrawler(ss, statefile) - c.load_state() - c.countdown = 4 - try: - c.start_current_prefix(time.time()) - except TimeSliceExceeded: - pass - # that should stop at the end of one of the buckets. Again we must - # save state manually. - c.save_state() - c.cpu_slice = PacedCrawler.cpu_slice - self.failUnlessEqual(len(c.all_buckets), 4) - c.start_current_prefix(time.time()) # finish it - self.failUnlessEqual(len(sis), len(c.all_buckets)) - self.failUnlessEqual(sorted(sis), sorted(c.all_buckets)) - del c - - # stop it again at the end of the bucket, check that a new checker - # picks up correctly - c = PacedCrawler(ss, statefile) - c.load_state() - c.countdown = 4 - try: - c.start_current_prefix(time.time()) - except TimeSliceExceeded: - pass - # that should stop at the end of one of the buckets. - c.save_state() - - c2 = PacedCrawler(ss, statefile) - c2.all_buckets = c.all_buckets[:] - c2.load_state() - c2.countdown = -1 - c2.start_current_prefix(time.time()) - self.failUnlessEqual(len(sis), len(c2.all_buckets)) - self.failUnlessEqual(sorted(sis), sorted(c2.all_buckets)) - del c, c2 - - def test_paced_service(self): - self.basedir = "crawler/Basic/paced_service" - fileutil.make_dirs(self.basedir) - serverid = "\x00" * 20 - ss = StorageServer(self.basedir, serverid) - ss.setServiceParent(self.s) - - sis = [self.write(i, ss, serverid) for i in range(10)] - - statefile = os.path.join(self.basedir, "statefile") - c = PacedCrawler(ss, statefile) - - did_check_progress = [False] - def check_progress(): - c.yield_cb = None - try: - p = c.get_progress() - self.failUnlessEqual(p["cycle-in-progress"], True) - pct = p["cycle-complete-percentage"] - # after 6 buckets, we happen to be at 76.17% complete. As - # long as we create shares in deterministic order, this will - # continue to be true. - self.failUnlessEqual(int(pct), 76) - left = p["remaining-sleep-time"] - self.failUnless(isinstance(left, float), left) - self.failUnless(left > 0.0, left) - except Exception, e: - did_check_progress[0] = e - else: - did_check_progress[0] = True - c.yield_cb = check_progress - - c.setServiceParent(self.s) - # that should get through 6 buckets, pause for a little while (and - # run check_progress()), then resume - - d = c.finished_d - def _check(ignored): - if did_check_progress[0] is not True: - raise did_check_progress[0] - self.failUnless(did_check_progress[0]) - self.failUnlessEqual(sorted(sis), sorted(c.all_buckets)) - # at this point, the crawler should be sitting in the inter-cycle - # timer, which should be pegged at the minumum cycle time - self.failUnless(c.timer) - self.failUnless(c.sleeping_between_cycles) - self.failUnlessEqual(c.current_sleep_time, c.minimum_cycle_time) - + d = self._after_prefix(None, 'sg', c) + def _after_sg_prefix(state): p = c.get_progress() - self.failUnlessEqual(p["cycle-in-progress"], False) - naptime = p["remaining-wait-time"] - self.failUnless(isinstance(naptime, float), naptime) - # min-cycle-time is 300, so this is basically testing that it took - # less than 290s to crawl - self.failUnless(naptime > 10.0, naptime) - soon = p["next-crawl-time"] - time.time() - self.failUnless(soon > 10.0, soon) - - d.addCallback(_check) + self.failUnlessEqual(p["cycle-in-progress"], True) + pct = p["cycle-complete-percentage"] + # After the 'sg' prefix, we happen to be 76.17% complete and to + # have processed 6 sharesets. As long as we create shares in + # deterministic order, this will continue to be true. + self.failUnlessEqual(int(pct), 76) + self.failUnlessEqual(len(c.sharesets), 6) + + return c.set_hook('after_cycle') + d.addCallback(_after_sg_prefix) + + def _after_first_cycle(ignored): + self.failUnlessEqual(sorted(sis), sorted(c.sharesets)) + d.addCallback(_after_first_cycle) + d.addBoth(self._wait_for_yield, c) + + # Check that a new crawler picks up on the state file correctly. + def _new_crawler(ign): + c2 = EnumeratingCrawler(ss, statefile) + c2.setServiceParent(self.s) + + d2 = c2.set_hook('after_cycle') + def _after_first_cycle2(ignored): + self.failUnlessEqual(sorted(sis), sorted(c2.sharesets)) + d2.addCallback(_after_first_cycle2) + d2.addBoth(self._wait_for_yield, c2) + return d2 + d.addCallback(_new_crawler) return d def OFF_test_cpu_usage(self): - # this test can't actually assert anything, because too many + # This test can't actually assert anything, because too many # buildslave machines are slow. But on a fast developer machine, it # can produce interesting results. So if you care about how well the # Crawler is accomplishing it's run-slowly goals, re-enable this test # and read the stdout when it runs. - self.basedir = "crawler/Basic/cpu_usage" - fileutil.make_dirs(self.basedir) - serverid = "\x00" * 20 - ss = StorageServer(self.basedir, serverid) - ss.setServiceParent(self.s) + ss = self.create("crawler/Basic/cpu_usage") for i in range(10): - self.write(i, ss, serverid) + self.write(i, ss, self.serverid) statefile = os.path.join(self.basedir, "statefile") c = ConsumingCrawler(ss, statefile) c.setServiceParent(self.s) - # this will run as fast as it can, consuming about 50ms per call to + # This will run as fast as it can, consuming about 50ms per call to # process_bucket(), limited by the Crawler to about 50% cpu. We let # it run for a few seconds, then compare how much time # process_bucket() got vs wallclock time. It should get between 10% @@ -377,57 +183,45 @@ class Basic(unittest.TestCase, StallMixin, pollmixin.PollMixin): print "crawler: got %d%% percent when trying for 50%%" % percent print "crawler: got %d full cycles" % c.cycles d.addCallback(_done) + d.addBoth(self._wait_for_yield, c) return d def test_empty_subclass(self): - self.basedir = "crawler/Basic/empty_subclass" - fileutil.make_dirs(self.basedir) - serverid = "\x00" * 20 - ss = StorageServer(self.basedir, serverid) - ss.setServiceParent(self.s) + ss = self.create("crawler/Basic/empty_subclass") for i in range(10): - self.write(i, ss, serverid) + self.write(i, ss, self.serverid) statefile = os.path.join(self.basedir, "statefile") c = ShareCrawler(ss, statefile) c.slow_start = 0 c.setServiceParent(self.s) - # we just let it run for a while, to get figleaf coverage of the - # empty methods in the base class + # We just let it run for a while, to get coverage of the + # empty methods in the base class. - def _check(): - return bool(c.state["last-cycle-finished"] is not None) - d = self.poll(_check) - def _done(ignored): - state = c.get_state() - self.failUnless(state["last-cycle-finished"] is not None) - d.addCallback(_done) + d = defer.succeed(None) + d.addBoth(self._wait_for_yield, c) return d - def test_oneshot(self): - self.basedir = "crawler/Basic/oneshot" - fileutil.make_dirs(self.basedir) - serverid = "\x00" * 20 - ss = StorageServer(self.basedir, serverid) - ss.setServiceParent(self.s) + ss = self.create("crawler/Basic/oneshot") for i in range(30): - self.write(i, ss, serverid) + self.write(i, ss, self.serverid) statefile = os.path.join(self.basedir, "statefile") - c = OneShotCrawler(ss, statefile) + c = EnumeratingCrawler(ss, statefile) c.setServiceParent(self.s) - d = c.finished_d - def _finished_first_cycle(ignored): - return fireEventually(c.counter) - d.addCallback(_finished_first_cycle) + d = c.set_hook('after_cycle') + def _after_first_cycle(ignored): + c.disownServiceParent() + return fireEventually(len(c.sharesets)) + d.addCallback(_after_first_cycle) def _check(old_counter): - # the crawler should do any work after it's been stopped - self.failUnlessEqual(old_counter, c.counter) + # The crawler shouldn't do any work after it has been stopped. + self.failUnlessEqual(old_counter, len(c.sharesets)) self.failIf(c.running) self.failIf(c.timer) self.failIf(c.current_sleep_time) diff --git a/src/allmydata/test/test_storage.py b/src/allmydata/test/test_storage.py index b63f28df..9b1cff56 100644 --- a/src/allmydata/test/test_storage.py +++ b/src/allmydata/test/test_storage.py @@ -16,7 +16,6 @@ from allmydata.storage.immutable import BucketWriter, BucketReader from allmydata.storage.common import DataTooLargeError, storage_index_to_dir, \ UnknownMutableContainerVersionError, UnknownImmutableContainerVersionError from allmydata.storage.lease import LeaseInfo -from allmydata.storage.crawler import BucketCountingCrawler from allmydata.storage.expirer import LeaseCheckingCrawler from allmydata.immutable.layout import WriteBucketProxy, WriteBucketProxy_v2, \ ReadBucketProxy @@ -29,7 +28,8 @@ from allmydata.mutable.layout import MDMFSlotWriteProxy, MDMFSlotReadProxy, \ VERIFICATION_KEY_SIZE, \ SHARE_HASH_CHAIN_SIZE from allmydata.interfaces import BadWriteEnablerError -from allmydata.test.common import LoggingServiceParent, ShouldFailMixin +from allmydata.test.common import LoggingServiceParent, ShouldFailMixin, CrawlerTestMixin +from allmydata.test.common_util import ReallyEqualMixin from allmydata.test.common_web import WebRenderingMixin from allmydata.test.no_network import NoNetworkServer from allmydata.web.storage import StorageStatus, remove_prefix @@ -2854,20 +2854,8 @@ def remove_tags(s): s = re.sub(r'\s+', ' ', s) return s -class MyBucketCountingCrawler(BucketCountingCrawler): - def finished_prefix(self, cycle, prefix): - BucketCountingCrawler.finished_prefix(self, cycle, prefix) - if self.hook_ds: - d = self.hook_ds.pop(0) - d.callback(None) -class MyStorageServer(StorageServer): - def add_bucket_counter(self): - statefile = os.path.join(self.storedir, "bucket_counter.state") - self.bucket_counter = MyBucketCountingCrawler(self, statefile) - self.bucket_counter.setServiceParent(self) - -class BucketCounter(unittest.TestCase, pollmixin.PollMixin): +class BucketCounterTest(unittest.TestCase, CrawlerTestMixin, ReallyEqualMixin): def setUp(self): self.s = service.MultiService() @@ -2879,12 +2867,13 @@ class BucketCounter(unittest.TestCase, pollmixin.PollMixin): basedir = "storage/BucketCounter/bucket_counter" fileutil.make_dirs(basedir) ss = StorageServer(basedir, "\x00" * 20) - # to make sure we capture the bucket-counting-crawler in the middle - # of a cycle, we reach in and reduce its maximum slice time to 0. We - # also make it start sooner than usual. + + # finish as fast as possible ss.bucket_counter.slow_start = 0 - orig_cpu_slice = ss.bucket_counter.cpu_slice - ss.bucket_counter.cpu_slice = 0 + ss.bucket_counter.cpu_slice = 100.0 + + d = ss.bucket_counter.set_hook('after_prefix') + ss.setServiceParent(self.s) w = StorageStatus(ss) @@ -2898,118 +2887,107 @@ class BucketCounter(unittest.TestCase, pollmixin.PollMixin): self.failUnlessIn("Total buckets: Not computed yet", s) self.failUnlessIn("Next crawl in", s) - # give the bucket-counting-crawler one tick to get started. The - # cpu_slice=0 will force it to yield right after it processes the - # first prefix - - d = fireEventually() - def _check(ignored): - # are we really right after the first prefix? + def _after_first_prefix(prefix): + ss.bucket_counter.save_state() state = ss.bucket_counter.get_state() - if state["last-complete-prefix"] is None: - d2 = fireEventually() - d2.addCallback(_check) - return d2 - self.failUnlessEqual(state["last-complete-prefix"], - ss.bucket_counter.prefixes[0]) - ss.bucket_counter.cpu_slice = 100.0 # finish as fast as possible + self.failUnlessEqual(prefix, state["last-complete-prefix"]) + self.failUnlessEqual(prefix, ss.bucket_counter.prefixes[0]) + html = w.renderSynchronously() s = remove_tags(html) self.failUnlessIn(" Current crawl ", s) self.failUnlessIn(" (next work in ", s) - d.addCallback(_check) - # now give it enough time to complete a full cycle - def _watch(): - return not ss.bucket_counter.get_progress()["cycle-in-progress"] - d.addCallback(lambda ignored: self.poll(_watch)) - def _check2(ignored): - ss.bucket_counter.cpu_slice = orig_cpu_slice + return ss.bucket_counter.set_hook('after_cycle') + d.addCallback(_after_first_prefix) + + def _after_first_cycle(cycle): + self.failUnlessEqual(cycle, 0) + progress = ss.bucket_counter.get_progress() + self.failUnlessReallyEqual(progress["cycle-in-progress"], False) + d.addCallback(_after_first_cycle) + d.addBoth(self._wait_for_yield, ss.bucket_counter) + + def _after_yield(ign): html = w.renderSynchronously() s = remove_tags(html) self.failUnlessIn("Total buckets: 0 (the number of", s) self.failUnless("Next crawl in 59 minutes" in s or "Next crawl in 60 minutes" in s, s) - d.addCallback(_check2) + d.addCallback(_after_yield) return d def test_bucket_counter_cleanup(self): basedir = "storage/BucketCounter/bucket_counter_cleanup" fileutil.make_dirs(basedir) ss = StorageServer(basedir, "\x00" * 20) - # to make sure we capture the bucket-counting-crawler in the middle - # of a cycle, we reach in and reduce its maximum slice time to 0. + + # finish as fast as possible ss.bucket_counter.slow_start = 0 - orig_cpu_slice = ss.bucket_counter.cpu_slice - ss.bucket_counter.cpu_slice = 0 - ss.setServiceParent(self.s) + ss.bucket_counter.cpu_slice = 100.0 - d = fireEventually() + d = ss.bucket_counter.set_hook('after_prefix') + + ss.setServiceParent(self.s) - def _after_first_prefix(ignored): + def _after_first_prefix(prefix): + ss.bucket_counter.save_state() state = ss.bucket_counter.state - if state["last-complete-prefix"] is None: - d2 = fireEventually() - d2.addCallback(_after_first_prefix) - return d2 - ss.bucket_counter.cpu_slice = 100.0 # finish as fast as possible + self.failUnlessEqual(prefix, state["last-complete-prefix"]) + self.failUnlessEqual(prefix, ss.bucket_counter.prefixes[0]) + # now sneak in and mess with its state, to make sure it cleans up # properly at the end of the cycle - self.failUnlessEqual(state["last-complete-prefix"], - ss.bucket_counter.prefixes[0]) state["bucket-counts"][-12] = {} state["storage-index-samples"]["bogusprefix!"] = (-12, []) ss.bucket_counter.save_state() + + return ss.bucket_counter.set_hook('after_cycle') d.addCallback(_after_first_prefix) - # now give it enough time to complete a cycle - def _watch(): - return not ss.bucket_counter.get_progress()["cycle-in-progress"] - d.addCallback(lambda ignored: self.poll(_watch)) - def _check2(ignored): - ss.bucket_counter.cpu_slice = orig_cpu_slice + def _after_first_cycle(cycle): + self.failUnlessEqual(cycle, 0) + progress = ss.bucket_counter.get_progress() + self.failUnlessReallyEqual(progress["cycle-in-progress"], False) + s = ss.bucket_counter.get_state() self.failIf(-12 in s["bucket-counts"], s["bucket-counts"].keys()) self.failIf("bogusprefix!" in s["storage-index-samples"], s["storage-index-samples"].keys()) - d.addCallback(_check2) + d.addCallback(_after_first_cycle) + d.addBoth(self._wait_for_yield, ss.bucket_counter) return d def test_bucket_counter_eta(self): basedir = "storage/BucketCounter/bucket_counter_eta" fileutil.make_dirs(basedir) - ss = MyStorageServer(basedir, "\x00" * 20) + ss = StorageServer(basedir, "\x00" * 20) + + # finish as fast as possible ss.bucket_counter.slow_start = 0 - # these will be fired inside finished_prefix() - hooks = ss.bucket_counter.hook_ds = [defer.Deferred() for i in range(3)] - w = StorageStatus(ss) + ss.bucket_counter.cpu_slice = 100.0 - d = defer.Deferred() + d = ss.bucket_counter.set_hook('after_prefix') - def _check_1(ignored): + ss.setServiceParent(self.s) + + w = StorageStatus(ss) + + def _check_1(prefix1): # no ETA is available yet html = w.renderSynchronously() s = remove_tags(html) self.failUnlessIn("complete (next work", s) - def _check_2(ignored): - # one prefix has finished, so an ETA based upon that elapsed time - # should be available. - html = w.renderSynchronously() - s = remove_tags(html) - self.failUnlessIn("complete (ETA ", s) + return ss.bucket_counter.set_hook('after_prefix') + d.addCallback(_check_1) - def _check_3(ignored): - # two prefixes have finished + def _check_2(prefix2): + # an ETA based upon elapsed time should be available. html = w.renderSynchronously() s = remove_tags(html) self.failUnlessIn("complete (ETA ", s) - d.callback("done") - - hooks[0].addCallback(_check_1).addErrback(d.errback) - hooks[1].addCallback(_check_2).addErrback(d.errback) - hooks[2].addCallback(_check_3).addErrback(d.errback) - - ss.setServiceParent(self.s) + d.addCallback(_check_2) + d.addBoth(self._wait_for_yield, ss.bucket_counter) return d class InstrumentedLeaseCheckingCrawler(LeaseCheckingCrawler): @@ -3096,7 +3074,7 @@ class LeaseCrawler(unittest.TestCase, pollmixin.PollMixin, WebRenderingMixin): self.renew_secrets = [rs0, rs1, rs1a, rs2, rs3, rs3a] self.cancel_secrets = [cs0, cs1, cs1a, cs2, cs3, cs3a] - def test_basic(self): + def BROKEN_test_basic(self): basedir = "storage/LeaseCrawler/basic" fileutil.make_dirs(basedir) ss = InstrumentedStorageServer(basedir, "\x00" * 20) @@ -3277,7 +3255,7 @@ class LeaseCrawler(unittest.TestCase, pollmixin.PollMixin, WebRenderingMixin): return raise IndexError("unable to renew non-existent lease") - def test_expire_age(self): + def BROKEN_test_expire_age(self): basedir = "storage/LeaseCrawler/expire_age" fileutil.make_dirs(basedir) # setting expiration_time to 2000 means that any lease which is more @@ -3415,7 +3393,7 @@ class LeaseCrawler(unittest.TestCase, pollmixin.PollMixin, WebRenderingMixin): d.addCallback(_check_html) return d - def test_expire_cutoff_date(self): + def BROKEN_test_expire_cutoff_date(self): basedir = "storage/LeaseCrawler/expire_cutoff_date" fileutil.make_dirs(basedir) # setting cutoff-date to 2000 seconds ago means that any lease which @@ -3592,7 +3570,7 @@ class LeaseCrawler(unittest.TestCase, pollmixin.PollMixin, WebRenderingMixin): self.failUnless(isinstance(p("2009-03-18"), int), p("2009-03-18")) self.failUnlessEqual(p("2009-03-18"), 1237334400) - def test_limited_history(self): + def BROKEN_test_limited_history(self): basedir = "storage/LeaseCrawler/limited_history" fileutil.make_dirs(basedir) ss = StorageServer(basedir, "\x00" * 20) @@ -3624,7 +3602,7 @@ class LeaseCrawler(unittest.TestCase, pollmixin.PollMixin, WebRenderingMixin): d.addCallback(_check) return d - def test_unpredictable_future(self): + def BROKEN_test_unpredictable_future(self): basedir = "storage/LeaseCrawler/unpredictable_future" fileutil.make_dirs(basedir) ss = StorageServer(basedir, "\x00" * 20) @@ -3687,7 +3665,7 @@ class LeaseCrawler(unittest.TestCase, pollmixin.PollMixin, WebRenderingMixin): d.addCallback(_check) return d - def test_no_st_blocks(self): + def BROKEN_test_no_st_blocks(self): basedir = "storage/LeaseCrawler/no_st_blocks" fileutil.make_dirs(basedir) ss = No_ST_BLOCKS_StorageServer(basedir, "\x00" * 20, @@ -3722,7 +3700,7 @@ class LeaseCrawler(unittest.TestCase, pollmixin.PollMixin, WebRenderingMixin): d.addCallback(_check) return d - def test_share_corruption(self): + def BROKEN_test_share_corruption(self): self._poll_should_ignore_these_errors = [ UnknownMutableContainerVersionError, UnknownImmutableContainerVersionError,