From: Brian Warner Date: Thu, 14 Jan 2010 20:11:19 +0000 (-0800) Subject: change docs and --help to use "grid" instead of "virtual drive": closes #892. X-Git-Url: https://git.rkrishnan.org/components/com_hotproperty/frontends/configuration.rst?a=commitdiff_plain;h=d3d1293d2fee8b625d36687b938bda538aa08aeb;p=tahoe-lafs%2Ftahoe-lafs.git change docs and --help to use "grid" instead of "virtual drive": closes #892. Thanks to David-Sarah Hopwood for the patch. --- diff --git a/docs/architecture.txt b/docs/architecture.txt index 5119f442..cf8f4cb7 100644 --- a/docs/architecture.txt +++ b/docs/architecture.txt @@ -5,14 +5,15 @@ OVERVIEW -At a high-level this system consists of three layers: the grid, the -filesystem, and the application. +At a high-level this system consists of three layers: the key-value store, +the filesystem, and the application. -The lowest layer is the "grid", a key-value store mapping from capabilities to -data. The capabilities are relatively short ascii strings, each used as a -reference to an arbitrary-length sequence of data bytes, and are like a URI -for that data. This data is encrypted and distributed across a number of -nodes, such that it will survive the loss of most of the nodes. +The lowest layer is the key-value store, which is a distributed hashtable +mapping from capabilities to data. The capabilities are relatively short +ASCII strings, each used as a reference to an arbitrary-length sequence of +data bytes, and are like a URI for that data. This data is encrypted and +distributed across a number of nodes, such that it will survive the loss of +most of the nodes. The middle layer is the decentralized filesystem: a directed graph in which the intermediate nodes are directories and the leaf nodes are files. The leaf @@ -31,19 +32,21 @@ filesystem can be used by other applications, too. THE GRID OF STORAGE SERVERS -The grid is composed of peer nodes -- processes running on computers. They -establish TCP connections to each other using Foolscap, a secure remote -message passing library. +A key-value store is implemented by a collection of peer nodes -- processes +running on computers -- called a "grid". (The term "grid" is also used +loosely for the filesystem supported by these nodes.) The nodes in a grid +establish TCP connections to each other using Foolscap, a secure +remote-message-passing library. -Each peer offers certain services to the others. The primary service is that +Each node offers certain services to the others. The primary service is that of the storage server, which holds data in the form of "shares". Shares are encoded pieces of files. There are a configurable number of shares for each file, 10 by default. Normally, each share is stored on a separate server, but a single server can hold multiple shares for a single file. -Peers learn about each other through an "introducer". Each peer connects to a -central introducer at startup, and receives a list of all other peers from -it. Each peer then connects to all other peers, creating a fully-connected +Nodes learn about each other through an "introducer". Each node connects to a +central introducer at startup, and receives a list of all other nodes from +it. Each node then connects to all other nodes, creating a fully-connected topology. In the current release, nodes behind NAT boxes will connect to all nodes that they can open connections to, but they cannot open connections to other nodes behind NAT boxes. Therefore, the more nodes behind NAT boxes, the @@ -62,16 +65,17 @@ node to tell a new client about all the others. With decentralized "gossip-based" introduction, simply knowing how to contact any one node will be enough to contact all of them. + FILE ENCODING -When a peer stores a file on the grid, it first encrypts the file, using a key +When a node stores a file on its grid, it first encrypts the file, using a key that is optionally derived from the hash of the file itself. It then segments the encrypted file into small pieces, in order to reduce the memory footprint, and to decrease the lag between initiating a download and receiving the first part of the file; for example the lag between hitting "play" and a movie actually starting. -The peer then erasure-codes each segment, producing blocks such that only a +The node then erasure-codes each segment, producing blocks such that only a subset of them are needed to reconstruct the segment. It sends one block from each segment to a given server. The set of blocks on a given server constitutes a "share". Only a subset of the shares (3 out of 10, by default) @@ -79,7 +83,7 @@ are needed to reconstruct the file. A tagged hash of the encryption key is used to form the "storage index", which is used for both server selection (described below) and to index shares within -the Storage Servers on the selected peers. +the Storage Servers on the selected nodes. Hashes are computed while the shares are being produced, to validate the ciphertext and the shares themselves. Merkle hash trees are used to enable @@ -135,17 +139,17 @@ public/private key pair created when the mutable file is created, and the read-only capability to that file includes a secure hash of the public key. Read-write capabilities to mutable files represent the ability to read the -file (just like a read-only capability) and also to write a new version of the -file, overwriting any extant version. Read-write capabilities are unique -- -each one includes the secure hash of the private key associated with that +file (just like a read-only capability) and also to write a new version of +the file, overwriting any extant version. Read-write capabilities are unique +-- each one includes the secure hash of the private key associated with that mutable file. The capability provides both "location" and "identification": you can use it to retrieve a set of bytes, and then you can use it to validate ("identify") that these potential bytes are indeed the ones that you were looking for. -The "grid" layer is insufficient to provide a virtual drive: an actual -filesystem requires human-meaningful names. Capabilities sit on the +The "key-value store" layer is insufficient to provide a usable filesystem, +which requires human-meaningful names. Capabilities sit on the "global+secure" edge of Zooko's Triangle[1]. They are self-authenticating, meaning that nobody can trick you into using a file that doesn't match the capability you used to refer to that file. @@ -153,40 +157,40 @@ capability you used to refer to that file. SERVER SELECTION -When a file is uploaded, the encoded shares are sent to other peers. But to +When a file is uploaded, the encoded shares are sent to other nodes. But to which ones? The "server selection" algorithm is used to make this choice. In the current version, the storage index is used to consistently-permute the -set of all peers (by sorting the peers by HASH(storage_index+peerid)). Each -file gets a different permutation, which (on average) will evenly distribute -shares among the grid and avoid hotspots. +set of all peer nodes (by sorting the peer nodes by +HASH(storage_index+peerid)). Each file gets a different permutation, which +(on average) will evenly distribute shares among the grid and avoid hotspots. -We use this permuted list of peers to ask each peer, in turn, if it will hold +We use this permuted list of nodes to ask each node, in turn, if it will hold a share for us, by sending an 'allocate_buckets() query' to each one. Some -will say yes, others (those who are full) will say no: when a peer refuses our -request, we just take that share to the next peer on the list. We keep going +will say yes, others (those who are full) will say no: when a node refuses our +request, we just take that share to the next node on the list. We keep going until we run out of shares to place. At the end of the process, we'll have a -table that maps each share number to a peer, and then we can begin the +table that maps each share number to a node, and then we can begin the encode+push phase, using the table to decide where each share should be sent. -Most of the time, this will result in one share per peer, which gives us +Most of the time, this will result in one share per node, which gives us maximum reliability (since it disperses the failures as widely as possible). -If there are fewer useable peers than there are shares, we'll be forced to -loop around, eventually giving multiple shares to a single peer. This reduces +If there are fewer useable nodes than there are shares, we'll be forced to +loop around, eventually giving multiple shares to a single node. This reduces reliability, so it isn't the sort of thing we want to happen all the time, and either indicates that the default encoding parameters are set incorrectly -(creating more shares than you have peers), or that the grid does not have -enough space (many peers are full). But apart from that, it doesn't hurt. If -we have to loop through the peer list a second time, we accelerate the query -process, by asking each peer to hold multiple shares on the second pass. In +(creating more shares than you have nodes), or that the grid does not have +enough space (many nodes are full). But apart from that, it doesn't hurt. If +we have to loop through the node list a second time, we accelerate the query +process, by asking each node to hold multiple shares on the second pass. In most cases, this means we'll never send more than two queries to any given -peer. +node. -If a peer is unreachable, or has an error, or refuses to accept any of our +If a node is unreachable, or has an error, or refuses to accept any of our shares, we remove them from the permuted list, so we won't query them a second -time for this file. If a peer already has shares for the file we're uploading +time for this file. If a node already has shares for the file we're uploading (or if someone else is currently sending them shares), we add that information -to the share-to-peer table. This lets us do less work for files which have +to the share-to-peer-node table. This lets us do less work for files which have been uploaded once before, while making sure we still wind up with as many shares as we desire. @@ -197,10 +201,10 @@ If we cannot place at least this many, the upload is declared a failure. The current defaults use k=3, shares_of_happiness=7, and N=10, meaning that we'll try to place 10 shares, we'll be happy if we can place 7, and we need to get back any 3 to recover the file. This results in a 3.3x expansion -factor. In general, you should set N about equal to the number of peers in +factor. In general, you should set N about equal to the number of nodes in your grid, then set N/k to achieve your desired availability goals. -When downloading a file, the current release just asks all known peers for any +When downloading a file, the current release just asks all known nodes for any shares they might have, chooses the minimal necessary subset, then starts downloading and processing those shares. A later release will use the full algorithm to reduce the number of queries that must be sent out. This @@ -209,26 +213,26 @@ after it has located k shares (instead of all N). This reduces the number of queries that must be sent before downloading can begin. The actual number of queries is directly related to the availability of the -peers and the degree of overlap between the peerlist used at upload and at +nodes and the degree of overlap between the node list used at upload and at download. For stable grids, this overlap is very high, and usually the first k queries will result in shares. The number of queries grows as the stability decreases. Some limits may be imposed in large grids to avoid querying a -million peers; this provides a tradeoff between the work spent to discover +million nodes; this provides a tradeoff between the work spent to discover that a file is unrecoverable and the probability that a retrieval will fail when it could have succeeded if we had just tried a little bit harder. The appropriate value of this tradeoff will depend upon the size of the grid, and will change over time. -Other peer selection algorithms are possible. One earlier version (known as -"tahoe 3") used the permutation to place the peers around a large ring, +Other peer-node selection algorithms are possible. One earlier version (known +as "Tahoe 3") used the permutation to place the nodes around a large ring, distributed shares evenly around the same ring, then walks clockwise from 0 with a basket: each time we encounter a share, put it in the basket, each time -we encounter a peer, give them as many shares from our basket as they'll +we encounter a node, give them as many shares from our basket as they'll accept. This reduced the number of queries (usually to 1) for small grids -(where N is larger than the number of peers), but resulted in extremely +(where N is larger than the number of nodes), but resulted in extremely non-uniform share distribution, which significantly hurt reliability (sometimes the permutation resulted in most of the shares being dumped on a -single peer). +single node). Another algorithm (known as "denver airport"[2]) uses the permuted hash to decide on an approximate target for each share, then sends lease requests via @@ -243,12 +247,12 @@ the expense of complexity, latency, and reliability. SWARMING DOWNLOAD, TRICKLING UPLOAD Because the shares being downloaded are distributed across a large number of -peers, the download process will pull from many of them at the same time. The +nodes, the download process will pull from many of them at the same time. The current encoding parameters require 3 shares to be retrieved for each segment, -which means that up to 3 peers will be used simultaneously. For larger -networks, 8-of-22 encoding could be used, meaning 8 peers can be used +which means that up to 3 nodes will be used simultaneously. For larger +networks, 8-of-22 encoding could be used, meaning 8 nodes can be used simultaneously. This allows the download process to use the sum of the -available peers' upload bandwidths, resulting in downloads that take full +available nodes' upload bandwidths, resulting in downloads that take full advantage of the common 8x disparity between download and upload bandwith on modern ADSL lines. @@ -301,105 +305,25 @@ links to spaces that are shared with specific other users, and other spaces that are globally visible. -LEASES, REFRESHING, GARBAGE COLLECTION, QUOTAS - -THIS SECTION IS OUT OF DATE. Since we wrote this we've changed our minds -about how we intend to implement these features. Neither the old design, -documented below, nor the new one, documented on the tahoe-dev mailing list -and the wiki and the issue tracker, have actually been implemented yet. - -Shares are uploaded to a storage server, but they do not necessarily stay -there forever. We are anticipating three main share-lifetime management modes -for Tahoe: 1) per-share leases which expire, 2) per-account timers which -expire and cancel all leases for the account, and 3) centralized account -management without expiration timers. - -To be clear, none of these have been implemented yet. The -http://allmydata.org/trac/tahoe/wiki/QuotaManagement "Quota Management" wiki -page describes some of our plans for managing data lifetime and limited-space -user accounts. - -Multiple clients may be interested in a given share, for example if two -clients uploaded the same file, or if two clients are sharing a directory and -both want to make sure the files therein remain available. Consequently, each -share (technically each "bucket", which may contain multiple shares for a -single storage index) has a set of leases, one per client. One way to -visualize this is with a large table, with shares (i.e. buckets, or storage -indices, or files) as the rows, and accounts as columns. Each square of this -table might hold a lease. - -Using limited-duration leases reduces the storage consumed by clients who have -(for whatever reason) forgotten about the share they once cared about. -Clients are supposed to explicitly cancel leases for every file that they -remove from their vdrive, and when the last lease is removed on a share, the -storage server deletes that share. However, the storage server might be -offline when the client deletes the file, or the client might experience a bug -or a race condition that results in forgetting about the file. Using leases -that expire unless otherwise renewed ensures that these lost files will not -consume storage space forever. On the other hand, they require periodic -maintenance, which can become prohibitively expensive for large grids. In -addition, clients who go offline for a while are then obligated to get someone -else to keep their files alive for them. - - -In the first mode, each client holds a limited-duration lease on each share -(typically one month), and clients are obligated to periodically renew these -leases to keep them from expiring (typically once a week). In this mode, the -storage server does not know anything about which client is which: it only -knows about leases. - -In the second mode, each server maintains a list of clients and which leases -they hold. This is called the "account list", and each time a client wants to -upload a share or establish a lease, it provides credentials to allow the -server to know which Account it will be using. Rather than putting individual -timers on each lease, the server puts a timer on the Account. When the account -expires, all of the associated leases are cancelled. - -In this mode, clients are obligated to renew the Account periodically, but not -the (thousands of) individual share leases. Clients which forget about files -are still incurring a storage cost for those files. An occasional -reconcilliation process (in which the client presents the storage server with -a list of all the files it cares about, and the server removes leases for -anything that isn't on the list) can be used to free this storage, but the -effort involved is large, so reconcilliation must be done very infrequently. - -Our plan is to have the clients create their own Accounts, based upon the -possession of a private key. Clients can create as many accounts as they wish, -but they are responsible for their own maintenance. Servers can add up all the -leases for each account and present a report of usage, in bytes per -account. This is intended for friendnet scenarios where it would be nice to -know how much space your friends are consuming on your disk. - -In the third mode, the Account objects are centrally managed, and are not -expired by the storage servers. In this mode, the client presents credentials -that are issued by a central authority, such as a signed message which the -storage server can verify. The storage used by this account is not freed -unless and until the central account manager says so. - -This mode is more appropriate for a commercial offering, in which use of the -storage servers is contingent upon a monthly fee, or other membership -criteria. Being able to ask the storage usage for each account (or establish -limits on it) helps to enforce whatever kind of membership policy is desired. - - -Each lease is created with a pair of secrets: the "renew secret" and the -"cancel secret". These are just random-looking strings, derived by hashing -other higher-level secrets, starting with a per-client master secret. Anyone -who knows the secret is allowed to restart the expiration timer, or cancel the -lease altogether. Having these be individual values allows the original -uploading node to delegate these capabilities to others. - -In the current release, clients provide lease secrets to the storage server, -and each lease contains an expiration time, but there is no facility to -actually expire leases, nor are there explicit owners (the "ownerid" field of -each lease is always set to zero). In addition, many features have not been -implemented yet: the client should claim leases on files which are added to -the vdrive by linking (as opposed to uploading), and the client should cancel -leases on files which are removed from the vdrive, but neither has been -written yet. This means that shares are not ever deleted in this -release. (Note, however, that if read-cap to a file is deleted then it will no -longer be possible to decrypt that file, even if the shares which contain the -erasure-coded ciphertext still exist.) +LEASES, REFRESHING, GARBAGE COLLECTION + +When a file or directory in the virtual filesystem is no longer referenced, +the space that its shares occupied on each storage server can be freed, +making room for other shares. Tahoe currently uses a garbage collection +("GC") mechanism to implement this space-reclamation process. Each share has +one or more "leases", which are managed by clients who want the +file/directory to be retained. The storage server accepts each share for a +pre-defined period of time, and is allowed to delete the share if all of the +leases are cancelled or allowed to expire. + +Garbage collection is not enabled by default: storage servers will not delete +shares without being explicitly configured to do so. When GC is enabled, +clients are responsible for renewing their leases on a periodic basis at +least frequently enough to prevent any of the leases from expiring before the +next renewal pass. + +See docs/garbage-collection.txt for further information, and how to configure +garbage collection. FILE REPAIRER @@ -423,10 +347,10 @@ practice they will be closely related, and may run in the same process. The repairer process does not get the full capability of the file to be maintained: it merely gets the "repairer capability" subset, which does not include the decryption key. The File Verifier uses that data to find out which -peers ought to hold shares for this file, and to see if those peers are still +nodes ought to hold shares for this file, and to see if those nodes are still around and willing to provide the data. If the file is not healthy enough, the File Repairer is invoked to download the ciphertext, regenerate any missing -shares, and upload them to new peers. The goal of the File Repairer is to +shares, and upload them to new nodes. The goal of the File Repairer is to finish up with a full set of "N" shares. There are a number of engineering issues to be resolved here. The bandwidth, @@ -439,13 +363,13 @@ the resources consumed. In some cases, verification of multiple files can be performed at the same time, and repair of files can be delegated off to other nodes. -The security model we are currently using assumes that peers who claim to hold +The security model we are currently using assumes that nodes who claim to hold a share will actually provide it when asked. (We validate the data they -provide before using it in any way, but if enough peers claim to hold the data +provide before using it in any way, but if enough nodes claim to hold the data and are wrong, the file will not be repaired, and may decay beyond recoverability). There are several interesting approaches to mitigate this threat, ranging from challenges to provide a keyed hash of the allegedly-held -data (using "buddy nodes", in which two peers hold the same block, and check +data (using "buddy nodes", in which two nodes hold the same block, and check up on each other), to reputation systems, or even the original Mojo Nation economic model. @@ -475,20 +399,20 @@ node failure and overall file recovery failure, and by the erasure-coding technique used to generate shares. Many of these security properties depend upon the usual cryptographic -assumptions: the resistance of AES and RSA to attack, the resistance of SHA256 -to pre-image attacks, and upon the proximity of 2^-128 and 2^-256 to zero. A -break in AES would allow a confidentiality violation, a pre-image break in -SHA256 would allow a consistency violation, and a break in RSA would allow a -mutability violation. The discovery of a collision in SHA256 is unlikely to -allow much, but could conceivably allow a consistency violation in data that -was uploaded by the attacker. If SHA256 is threatened, further analysis will -be warranted. +assumptions: the resistance of AES and RSA to attack, the resistance of +SHA-256 to pre-image attacks, and upon the proximity of 2^-128 and 2^-256 to +zero. A break in AES would allow a confidentiality violation, a pre-image +break in SHA-256 would allow a consistency violation, and a break in RSA +would allow a mutability violation. The discovery of a collision in SHA-256 +is unlikely to allow much, but could conceivably allow a consistency +violation in data that was uploaded by the attacker. If SHA-256 is +threatened, further analysis will be warranted. There is no attempt made to provide anonymity, neither of the origin of a piece of data nor the identity of the subsequent downloaders. In general, anyone who already knows the contents of a file will be in a strong position to determine who else is uploading or downloading it. Also, it is quite easy -for a sufficiently-large coalition of nodes to correlate the set of peers who +for a sufficiently large coalition of nodes to correlate the set of nodes who are all uploading or downloading the same file, even if the attacker does not know the contents of the file in question. @@ -522,18 +446,18 @@ capabilities). RELIABILITY -File encoding and peer selection parameters can be adjusted to achieve +File encoding and peer-node selection parameters can be adjusted to achieve different goals. Each choice results in a number of properties; there are many tradeoffs. First, some terms: the erasure-coding algorithm is described as K-out-of-N (for this release, the default values are K=3 and N=10). Each grid will have -some number of peers; this number will rise and fall over time as peers join, +some number of nodes; this number will rise and fall over time as nodes join, drop out, come back, and leave forever. Files are of various sizes, some are -popular, others are rare. Peers have various capacities, variable +popular, others are rare. Nodes have various capacities, variable upload/download bandwidths, and network latency. Most of the mathematical -models that look at peer failure assume some average (and independent) -probability 'P' of a given peer being available: this can be high (servers +models that look at node failure assume some average (and independent) +probability 'P' of a given node being available: this can be high (servers tend to be online and available >90% of the time) or low (laptops tend to be turned on for an hour then disappear for several days). Files are encoded in segments of a given maximum size, which affects memory usage. @@ -549,24 +473,24 @@ better reliability (for P=99%, 50-out-of-100 is much much better than 5-of-10, roughly 10^50 times better), because there are more shares that can be lost without losing the file. -Likewise, the total number of peers in the network affects the same -granularity: having only one peer means a single point of failure, no matter -how many copies of the file you make. Independent peers (with uncorrelated +Likewise, the total number of nodes in the network affects the same +granularity: having only one node means a single point of failure, no matter +how many copies of the file you make. Independent nodes (with uncorrelated failures) are necessary to hit the mathematical ideals: if you have 100 nodes but they are all in the same office building, then a single power failure will take out all of them at once. The "Sybil Attack" is where a single attacker convinces you that they are actually multiple servers, so that you think you -are using a large number of independent peers, but in fact you have a single +are using a large number of independent nodes, but in fact you have a single point of failure (where the attacker turns off all their machines at -once). Large grids, with lots of truly-independent peers, will enable the use +once). Large grids, with lots of truly independent nodes, will enable the use of lower expansion factors to achieve the same reliability, but will increase -overhead because each peer needs to know something about every other, and the -rate at which peers come and go will be higher (requiring network maintenance +overhead because each node needs to know something about every other, and the +rate at which nodes come and go will be higher (requiring network maintenance traffic). Also, the File Repairer work will increase with larger grids, -although then the job can be distributed out to more peers. +although then the job can be distributed out to more nodes. Higher values of N increase overhead: more shares means more Merkle hashes -that must be included with the data, and more peers to contact to retrieve the +that must be included with the data, and more nodes to contact to retrieve the shares. Smaller segment sizes reduce memory usage (since each segment must be held in memory while erasure coding runs) and improves "alacrity" (since downloading can validate a smaller piece of data faster, delivering it to the @@ -592,9 +516,9 @@ This tool will continue to evolve as our analysis improves. [2]: all of these names are derived from the location where they were concocted, in this case in a car ride from Boulder to DEN. To be - precise, "tahoe 1" was an unworkable scheme in which everyone who holds + precise, "Tahoe 1" was an unworkable scheme in which everyone who holds shares for a given file would form a sort of cabal which kept track of - all the others, "tahoe 2" is the first-100-peers in the permuted hash - described in this document, and "tahoe 3" (or perhaps "potrero hill 1") + all the others, "Tahoe 2" is the first-100-nodes in the permuted hash + described in this document, and "Tahoe 3" (or perhaps "Potrero hill 1") was the abandoned ring-with-many-hands approach. diff --git a/src/allmydata/provisioning.py b/src/allmydata/provisioning.py index ff757956..2990689a 100644 --- a/src/allmydata/provisioning.py +++ b/src/allmydata/provisioning.py @@ -128,7 +128,7 @@ class ProvisioningTool(rend.Page): files_per_user_counts, 1000) add_input("Users", - "How many files in each user's vdrive? (avg)", + "How many files for each user? (avg)", i_files_per_user) space_per_user_sizes = [(1e6, "1MB"), @@ -147,7 +147,7 @@ class ProvisioningTool(rend.Page): space_per_user_sizes, 200e6) add_input("Users", - "How much data is in each user's vdrive? (avg)", + "How much data for each user? (avg)", i_space_per_user) sharing_ratios = [(1.0, "1.0x"), diff --git a/src/allmydata/scripts/cli.py b/src/allmydata/scripts/cli.py index 838958fa..233e3b1f 100644 --- a/src/allmydata/scripts/cli.py +++ b/src/allmydata/scripts/cli.py @@ -69,10 +69,10 @@ class CreateAliasOptions(VDriveOptions): def getSynopsis(self): return "%s create-alias ALIAS" % (os.path.basename(sys.argv[0]),) - longdesc = """Creates a new directory and adds an alias for it.""" + longdesc = """Create a new directory and add an alias for it.""" class ListAliasOptions(VDriveOptions): - longdesc = """Displays a table of all configured aliases.""" + longdesc = """Display a table of all configured aliases.""" class ListOptions(VDriveOptions): optFlags = [ @@ -85,7 +85,7 @@ class ListOptions(VDriveOptions): def parseArgs(self, where=""): self.where = where - longdesc = """List the contents of some portion of the virtual drive.""" + longdesc = """List the contents of some portion of the grid.""" class GetOptions(VDriveOptions): def parseArgs(self, arg1, arg2=None): @@ -100,11 +100,12 @@ class GetOptions(VDriveOptions): self.to_file = None def getSynopsis(self): - return "%s get VDRIVE_FILE LOCAL_FILE" % (os.path.basename(sys.argv[0]),) + return "%s get REMOTE_FILE LOCAL_FILE" % (os.path.basename(sys.argv[0]),) - longdesc = """Retrieve a file from the virtual drive and write it to the - local filesystem. If LOCAL_FILE is omitted or '-', the contents of the file - will be written to stdout.""" + longdesc = """ + Retrieve a file from the grid and write it to the local filesystem. If + LOCAL_FILE is omitted or '-', the contents of the file will be written to + stdout.""" def getUsage(self, width=None): t = VDriveOptions.getUsage(self, width) @@ -123,12 +124,7 @@ class PutOptions(VDriveOptions): ] def parseArgs(self, arg1=None, arg2=None): - # cat FILE | tahoe put # create unlinked file from stdin - # cat FILE | tahoe put - # same - # tahoe put bar # create unlinked file from local 'bar' - # cat FILE | tahoe put - FOO # create tahoe:FOO from stdin - # tahoe put bar FOO # copy local 'bar' to tahoe:FOO - # tahoe put bar tahoe:FOO # same + # see Examples below if arg1 is not None and arg2 is not None: self.from_file = arg1 @@ -143,13 +139,14 @@ class PutOptions(VDriveOptions): self.from_file = None def getSynopsis(self): - return "%s put LOCAL_FILE VDRIVE_FILE" % (os.path.basename(sys.argv[0]),) + return "%s put LOCAL_FILE REMOTE_FILE" % (os.path.basename(sys.argv[0]),) - longdesc = """Put a file into the virtual drive (copying the file's - contents from the local filesystem). If VDRIVE_FILE is missing, upload - the file but do not link it into a directory: prints the new filecap to - stdout. If LOCAL_FILE is missing or '-', data will be copied from stdin. - VDRIVE_FILE is assumed to start with tahoe: unless otherwise specified.""" + longdesc = """ + Put a file into the grid, copying its contents from the local filesystem. + If REMOTE_FILE is missing, upload the file but do not link it into a + directory; also print the new filecap to stdout. If LOCAL_FILE is missing + or '-', data will be copied from stdin. REMOTE_FILE is assumed to start + with tahoe: unless otherwise specified.""" def getUsage(self, width=None): t = VDriveOptions.getUsage(self, width) @@ -171,7 +168,7 @@ class CpOptions(VDriveOptions): ("verbose", "v", "Be noisy about what is happening."), ("caps-only", None, "When copying to local files, write out filecaps instead of actual " - "data. (only useful for debugging and tree-comparison purposes)"), + "data (only useful for debugging and tree-comparison purposes)."), ] def parseArgs(self, *args): if len(args) < 2: @@ -181,12 +178,12 @@ class CpOptions(VDriveOptions): def getSynopsis(self): return "Usage: tahoe [options] cp FROM.. TO" longdesc = """ - Use 'tahoe cp' to copy files between a local filesystem and a Tahoe - virtual filesystem. Any FROM/TO arguments that begin with an alias - indicate Tahoe-side files, and arguments which do not indicate local - files. Directories will be copied recursively. New Tahoe-side directories - will be created when necessary. Assuming that you have previously set up - an alias 'home' with 'tahoe create-alias home', here are some examples: + Use 'tahoe cp' to copy files between a local filesystem and a Tahoe grid. + Any FROM/TO arguments that begin with an alias indicate Tahoe-side + files or non-file arguments. Directories will be copied recursively. + New Tahoe-side directories will be created when necessary. Assuming that + you have previously set up an alias 'home' with 'tahoe create-alias home', + here are some examples: tahoe cp ~/foo.txt home: # creates tahoe-side home:foo.txt @@ -210,7 +207,7 @@ class RmOptions(VDriveOptions): self.where = where def getSynopsis(self): - return "%s rm VDRIVE_FILE" % (os.path.basename(sys.argv[0]),) + return "%s rm REMOTE_FILE" % (os.path.basename(sys.argv[0]),) class MvOptions(VDriveOptions): def parseArgs(self, frompath, topath): @@ -220,11 +217,15 @@ class MvOptions(VDriveOptions): def getSynopsis(self): return "%s mv FROM TO" % (os.path.basename(sys.argv[0]),) longdesc = """ - Use 'tahoe mv' to move files that are already on the grid elsewhere on the grid, e.g., 'tahoe mv alias:some_file alias:new_file'. + Use 'tahoe mv' to move files that are already on the grid elsewhere on + the grid, e.g., 'tahoe mv alias:some_file alias:new_file'. - If moving a remote file into a remote directory, you'll need to append a '/' to the name of the remote directory, e.g., 'tahoe mv tahoe:file1 tahoe:dir/', not 'tahoe mv tahoe:file1 tahoe:dir'. + If moving a remote file into a remote directory, you'll need to append a + '/' to the name of the remote directory, e.g., 'tahoe mv tahoe:file1 + tahoe:dir/', not 'tahoe mv tahoe:file1 tahoe:dir'. - Note that it is not possible to use this command to move local files to the grid -- use 'tahoe cp' for that. + Note that it is not possible to use this command to move local files to + the grid -- use 'tahoe cp' for that. """ class LnOptions(VDriveOptions): @@ -241,12 +242,13 @@ class BackupConfigurationError(Exception): class BackupOptions(VDriveOptions): optFlags = [ ("verbose", "v", "Be noisy about what is happening."), - ("ignore-timestamps", None, "Do not use backupdb timestamps to decide if a local file is unchanged."), + ("ignore-timestamps", None, "Do not use backupdb timestamps to decide whether a local file is unchanged."), ] - vcs_patterns = ('CVS', 'RCS', 'SCCS', '.git', '.gitignore', '.cvsignore', '.svn', - '.arch-ids','{arch}', '=RELEASE-ID', '=meta-update', '=update', - '.bzr', '.bzrignore', '.bzrtags', '.hg', '.hgignore', '_darcs') + vcs_patterns = ('CVS', 'RCS', 'SCCS', '.git', '.gitignore', '.cvsignore', + '.svn', '.arch-ids','{arch}', '=RELEASE-ID', + '=meta-update', '=update', '.bzr', '.bzrignore', + '.bzrtags', '.hg', '.hgignore', '_darcs') def __init__(self): super(BackupOptions, self).__init__() @@ -298,7 +300,13 @@ class BackupOptions(VDriveOptions): else: yield filename - longdesc = """Add a versioned backup of the local FROM directory to a timestamped subdir of the (tahoe) TO/Archives directory, sharing as many files and directories as possible with the previous backup. Creates TO/Latest as a reference to the latest backup. Behaves somewhat like 'rsync -a --link-dest=TO/Archives/(previous) FROM TO/Archives/(new); ln -sf TO/Archives/(new) TO/Latest'.""" + longdesc = """ + Add a versioned backup of the local FROM directory to a timestamped + subdirectory of the TO/Archives directory on the grid, sharing as many + files and directories as possible with earlier backups. Create TO/Latest + as a reference to the latest backup. Behaves somewhat like 'rsync -a + --link-dest=TO/Archives/(previous) FROM TO/Archives/(new); ln -sf + TO/Archives/(new) TO/Latest'.""" class WebopenOptions(VDriveOptions): def parseArgs(self, where=''): @@ -307,7 +315,8 @@ class WebopenOptions(VDriveOptions): def getSynopsis(self): return "%s webopen [ALIAS:PATH]" % (os.path.basename(sys.argv[0]),) - longdesc = """Opens a webbrowser to the contents of some portion of the virtual drive. When called without arguments, opens to the Welcome page.""" + longdesc = """Open a web browser to the contents of some file or + directory on the grid.""" class ManifestOptions(VDriveOptions): optFlags = [ @@ -322,7 +331,8 @@ class ManifestOptions(VDriveOptions): def getSynopsis(self): return "%s manifest [ALIAS:PATH]" % (os.path.basename(sys.argv[0]),) - longdesc = """Print a list of all files/directories reachable from the given starting point.""" + longdesc = """Print a list of all files and directories reachable from + the given starting point.""" class StatsOptions(VDriveOptions): optFlags = [ @@ -334,7 +344,8 @@ class StatsOptions(VDriveOptions): def getSynopsis(self): return "%s stats [ALIAS:PATH]" % (os.path.basename(sys.argv[0]),) - longdesc = """Print statistics about of all files/directories reachable from the given starting point.""" + longdesc = """Print statistics about of all files and directories + reachable from the given starting point.""" class CheckOptions(VDriveOptions): optFlags = [ @@ -349,7 +360,10 @@ class CheckOptions(VDriveOptions): def getSynopsis(self): return "%s check [ALIAS:PATH]" % (os.path.basename(sys.argv[0]),) - longdesc = """Check a single file or directory: count how many shares are available, verify their hashes. Optionally repair the file if any problems were found.""" + longdesc = """ + Check a single file or directory: count how many shares are available and + verify their hashes. Optionally repair the file if any problems were + found.""" class DeepCheckOptions(VDriveOptions): optFlags = [ @@ -365,7 +379,10 @@ class DeepCheckOptions(VDriveOptions): def getSynopsis(self): return "%s deep-check [ALIAS:PATH]" % (os.path.basename(sys.argv[0]),) - longdesc = """Check all files/directories reachable from the given starting point (which must be a directory), like 'tahoe check' but for multiple files. Optionally repair any problems found.""" + longdesc = """ + Check all files and directories reachable from the given starting point + (which must be a directory), like 'tahoe check' but for multiple files. + Optionally repair any problems found.""" subCommands = [ ["mkdir", None, MakeDirectoryOptions, "Create a new directory"], @@ -373,16 +390,16 @@ subCommands = [ ["create-alias", None, CreateAliasOptions, "Create a new alias cap"], ["list-aliases", None, ListAliasOptions, "List all alias caps"], ["ls", None, ListOptions, "List a directory"], - ["get", None, GetOptions, "Retrieve a file from the virtual drive."], - ["put", None, PutOptions, "Upload a file into the virtual drive."], + ["get", None, GetOptions, "Retrieve a file from the grid."], + ["put", None, PutOptions, "Upload a file into the grid."], ["cp", None, CpOptions, "Copy one or more files."], - ["rm", None, RmOptions, "Unlink a file or directory in the virtual drive."], - ["mv", None, MvOptions, "Move a file within the virtual drive."], + ["rm", None, RmOptions, "Unlink a file or directory on the grid."], + ["mv", None, MvOptions, "Move a file within the grid."], ["ln", None, LnOptions, "Make an additional link to an existing file."], ["backup", None, BackupOptions, "Make target dir look like local dir."], - ["webopen", None, WebopenOptions, "Open a webbrowser to the root_dir"], - ["manifest", None, ManifestOptions, "List all files/dirs in a subtree"], - ["stats", None, StatsOptions, "Print statistics about all files/dirs in a subtree"], + ["webopen", None, WebopenOptions, "Open a web browser to a grid file or directory."], + ["manifest", None, ManifestOptions, "List all files/directories in a subtree"], + ["stats", None, StatsOptions, "Print statistics about all files/directories in a subtree"], ["check", None, CheckOptions, "Check a single file or directory"], ["deep-check", None, DeepCheckOptions, "Check all files/directories reachable from a starting point"], ] diff --git a/src/allmydata/scripts/tahoe_put.py b/src/allmydata/scripts/tahoe_put.py index f67ebc5c..226bf49f 100644 --- a/src/allmydata/scripts/tahoe_put.py +++ b/src/allmydata/scripts/tahoe_put.py @@ -34,6 +34,7 @@ def put(options): # /oops/subdir/foo : DISALLOWED # ALIAS:foo : aliases[ALIAS]/foo # ALIAS:subdir/foo : aliases[ALIAS]/subdir/foo + # ALIAS:/oops/subdir/foo : DISALLOWED # DIRCAP:./foo : DIRCAP/foo # DIRCAP:./subdir/foo : DIRCAP/subdir/foo @@ -45,7 +46,7 @@ def put(options): rootcap, path = get_alias(aliases, to_file, DEFAULT_ALIAS) if path.startswith("/"): suggestion = to_file.replace("/", "", 1) - print >>stderr, "ERROR: The VDRIVE filename must not start with a slash" + print >>stderr, "ERROR: The remote filename must not start with a slash" print >>stderr, "Please try again, perhaps with:", suggestion return 1 url = nodeurl + "uri/%s/" % urllib.quote(rootcap) diff --git a/src/allmydata/test/check_load.py b/src/allmydata/test/check_load.py index 3097e34c..fd238520 100644 --- a/src/allmydata/test/check_load.py +++ b/src/allmydata/test/check_load.py @@ -97,12 +97,12 @@ bytes_downloaded = 0 directories_read = 0 directories_written = 0 -def listdir(nodeurl, root, vdrive_pathname): +def listdir(nodeurl, root, remote_pathname): if nodeurl[-1] != "/": nodeurl += "/" url = nodeurl + "uri/%s/" % urllib.quote(root) - if vdrive_pathname: - url += urllib.quote(vdrive_pathname) + if remote_pathname: + url += urllib.quote(remote_pathname) url += "?t=json" data = urllib.urlopen(url).read() try: @@ -203,11 +203,11 @@ def parse_url(url, defaultPort=None): path = "/" return scheme, host, port, path -def generate_and_put(nodeurl, root, vdrive_fname, size): +def generate_and_put(nodeurl, root, remote_filename, size): if nodeurl[-1] != "/": nodeurl += "/" url = nodeurl + "uri/%s/" % urllib.quote(root) - url += urllib.quote(vdrive_fname) + url += urllib.quote(remote_filename) scheme, host, port, path = parse_url(url) if scheme == "http": diff --git a/src/allmydata/test/test_cli.py b/src/allmydata/test/test_cli.py index 34923d35..3b80e47a 100644 --- a/src/allmydata/test/test_cli.py +++ b/src/allmydata/test/test_cli.py @@ -376,17 +376,17 @@ class Help(unittest.TestCase): def test_get(self): help = str(cli.GetOptions()) - self.failUnless("get VDRIVE_FILE LOCAL_FILE" in help, help) + self.failUnless("get REMOTE_FILE LOCAL_FILE" in help, help) self.failUnless("% tahoe get FOO |less" in help, help) def test_put(self): help = str(cli.PutOptions()) - self.failUnless("put LOCAL_FILE VDRIVE_FILE" in help, help) + self.failUnless("put LOCAL_FILE REMOTE_FILE" in help, help) self.failUnless("% cat FILE | tahoe put" in help, help) def test_rm(self): help = str(cli.RmOptions()) - self.failUnless("rm VDRIVE_FILE" in help, help) + self.failUnless("rm REMOTE_FILE" in help, help) def test_mv(self): help = str(cli.MvOptions()) diff --git a/src/allmydata/test/test_client.py b/src/allmydata/test/test_client.py index 1194826a..9d8f4756 100644 --- a/src/allmydata/test/test_client.py +++ b/src/allmydata/test/test_client.py @@ -32,20 +32,12 @@ class Basic(unittest.TestCase): basedir = "test_client.Basic.test_loadable" os.mkdir(basedir) open(os.path.join(basedir, "introducer.furl"), "w").write("") - open(os.path.join(basedir, "vdrive.furl"), "w").write("") - c = client.Client(basedir) - - def test_loadable_without_vdrive(self): - basedir = "test_client.Basic.test_loadable_without_vdrive" - os.mkdir(basedir) - open(os.path.join(basedir, "introducer.furl"), "w").write("") c = client.Client(basedir) def test_loadable_old_config_bits(self): basedir = "test_client.Basic.test_loadable_old_config_bits" os.mkdir(basedir) open(os.path.join(basedir, "introducer.furl"), "w").write("") - open(os.path.join(basedir, "vdrive.furl"), "w").write("") open(os.path.join(basedir, "no_storage"), "w").write("") open(os.path.join(basedir, "readonly_storage"), "w").write("") open(os.path.join(basedir, "debug_discard_storage"), "w").write("") @@ -60,7 +52,6 @@ class Basic(unittest.TestCase): basedir = "test_client.Basic.test_loadable_old_storage_config_bits" os.mkdir(basedir) open(os.path.join(basedir, "introducer.furl"), "w").write("") - open(os.path.join(basedir, "vdrive.furl"), "w").write("") open(os.path.join(basedir, "readonly_storage"), "w").write("") open(os.path.join(basedir, "debug_discard_storage"), "w").write("") c = client.Client(basedir) @@ -72,7 +63,6 @@ class Basic(unittest.TestCase): basedir = "test_client.Basic.test_secrets" os.mkdir(basedir) open(os.path.join(basedir, "introducer.furl"), "w").write("") - open(os.path.join(basedir, "vdrive.furl"), "w").write("") c = client.Client(basedir) secret_fname = os.path.join(basedir, "private", "secret") self.failUnless(os.path.exists(secret_fname), secret_fname) @@ -161,7 +151,6 @@ class Basic(unittest.TestCase): basedir = "test_client.Basic.test_versions" os.mkdir(basedir) open(os.path.join(basedir, "introducer.furl"), "w").write("") - open(os.path.join(basedir, "vdrive.furl"), "w").write("") c = client.Client(basedir) ss = c.getServiceNamed("storage") verdict = ss.remote_get_version() diff --git a/src/allmydata/test/test_system.py b/src/allmydata/test/test_system.py index 8988ab3e..fc2d0912 100644 --- a/src/allmydata/test/test_system.py +++ b/src/allmydata/test/test_system.py @@ -27,7 +27,7 @@ from twisted.web.error import Error from allmydata.test.common import SystemTestMixin LARGE_DATA = """ -This is some data to publish to the virtual drive, which needs to be large +This is some data to publish to the remote grid.., which needs to be large enough to not fit inside a LIT uri. """ @@ -697,8 +697,8 @@ class SystemTest(SystemTestMixin, unittest.TestCase): # the key, which should cause the download to fail the post-download # plaintext_hash check. - def test_vdrive(self): - self.basedir = "system/SystemTest/test_vdrive" + def test_filesystem(self): + self.basedir = "system/SystemTest/test_filesystem" self.data = LARGE_DATA d = self.set_up_nodes(use_stats_gatherer=True) d.addCallback(self._test_introweb)