]> git.rkrishnan.org Git - pihpsdr.git/shortlog
pihpsdr.git
2020-02-26 John MeltonMerge pull request #97 from dl1ycf/master
2020-02-26 c vwMerge branch 'master' of https://github.com/g0orx/pihpsdr
2020-02-26 c vwSupport for "single shot" Watt meter calibration
2020-02-26 c vwUser watt meter calibration both for fwd and rev power.
2020-02-26 c vwTerminate new protocol receiving thread gracefully if
2020-02-24 John Melton... Extened the upper limit in Watt Meter Calibration in...
2020-02-24 John Melton... updated make files
2020-02-23 John Melton... removing old release tar files
2020-02-23 John Melton... pushing v2.0.0-rc4 release tar file
2020-02-23 John Melton... Added ability to enable/disable protocols for discovery
2020-02-23 John Melton... created v2.0.0-rc3 release tar file
2020-02-23 John Melton... some cleanup of makefile
2020-02-23 John Melton... Added include vfo.h to remove warning on vfo_move call
2020-02-23 John Melton... Cleanup code to remove unused txLO and txError
2020-02-23 John Melton... Change i2c to use WiringPi I2C API so it will compile...
2020-02-23 John MeltonMerge pull request #96 from pa3gsb/master
2020-02-22 pa3gsbno controller but using cw also gpio_init must be performed
2020-02-22 pa3gsbuse of keyboard ; up (u) and down (d) VFO
2020-02-18 John Melton... Updated Controller 2 Schematic
2020-02-18 c vwMerge branch 'master' of https://github.com/g0orx/pihpsdr
2020-02-16 John Melton... updated to latest schematic for controller 2
2020-02-16 John Melton... Added Controller 2 schematic and panel layout
2020-02-05 c vwadded DIVERSITY functions (toggle, change gain/phase...
2020-02-05 c vwupdated documentation
2020-02-03 John Melton... binary releases for v2.0.0-rc2
2020-02-03 John Melton... Version 2.0.0-rc2
2020-02-03 John MeltonMerge pull request #92 from dl1ycf/master
2020-02-03 c vwfix
2020-02-03 c vwremoved un-used variable
2020-02-03 c vwMerge branch 'master' of https://github.com/g0orx/pihpsdr
2020-02-03 c vwdeleted
2020-02-03 c vwmanual merge with John's updates
2020-02-02 John Melton... Fixed labels in Watt Meter Calibration
2020-01-31 John Melton... removed gpio_menu
2020-01-31 John Melton... removed gpio_menu
2020-01-31 c vwcorrection for GPIO side tonecorrection for GPIO side...
2020-01-31 John Melton... added release binary and tar file
2020-01-31 John Melton... Added Configure GPIO
2020-01-31 c vwVFO top left corner text correction from John
2020-01-31 c vwadded extended comment to PS off/on when tuning
2020-01-30 John Melton... Fix mode display in vfo
2020-01-30 c vwreset PS while tuning
2020-01-29 c vwMerge branch 'master' of https://github.com/g0orx/pihpsdr
2020-01-29 c vwmanual merge with John's update
2020-01-29 c vwnew files
2020-01-27 John Melton... Adding gpio_menu.c and gpio_menu.h
2020-01-26 John Melton... Cleanup of all menus.
2020-01-20 c vwquery loopback in all cases.
2020-01-20 c vwuse loopback interface if its the only one up-and-running.
2020-01-17 c vwde-activated STEMLAB option
2020-01-16 c vwadded comment on HERMES
2020-01-16 c vwfix for inputt-ing diversity parameters
2020-01-16 c vwfixes for DUPLEX
2020-01-15 c vwcommented debug output
2020-01-15 c vwadjust colour of lines at -10, -30, -50 ... dBm
2020-01-15 c vwfixes to make cppcheck happier
2020-01-15 c vwsmall corrections
2020-01-15 c vwtype (inserted blank)
2020-01-15 c vwcorrected typo (missing blank)
2020-01-15 c vwremoved unused variables
2020-01-15 c vwDIVERSITY: ADC1 attenuator follows ADC0 attenuator
2020-01-15 c vwinclude LOCALCW and RedPitaya support by default
2020-01-15 c vwfixes to make cppcheck happier.
2020-01-15 c vwRemoved leftovers of RADIOBERRY special code
2020-01-15 c vwRemoved RADIOBERRY
2020-01-15 c vwsome changes to make cppcheck happy.
2020-01-14 c vwReduced maximum side tone volume to 0.25, this seems...
2020-01-14 c vwAdapted to larger gain range in DIVERSITY
2020-01-14 c vwIntroduced "coarse" and "fine" sliders
2020-01-13 c vwimprovements for DIVERSITY
2020-01-13 c vwrespect CHARLY25 preamps in RX panadapter
2020-01-13 c vwtx panadapter possibyl too high issue
2020-01-10 John MeltonMerge pull request #90 from dl1ycf/master
2020-01-09 c vwmaking AutoAttenuation a little bit more precise
2020-01-09 c vwmissing include
2020-01-09 c vwnew implementation of canTransmit()
2020-01-09 c vwseveral fixes
2020-01-08 c vwsmall fixes
2020-01-06 c vwTake care of "Break In" value
2020-01-06 c vwstop/start old protcol when changing puresignal
2020-01-06 c vwclear IQ buffer upon restart
2020-01-06 c vwdisabled chaning DUPLEX and #receivers while transmitting
2020-01-06 c vwPS 2.0 default parameters: changed AMP delay
2020-01-06 c vwrenamed button text for cw_internal
2020-01-05 c vwMake PS and TX displays "peak mode".
2020-01-05 DL1YCFfix
2020-01-04 DL1YCFDynamically allocate number of HPSDR receivers.
2020-01-04 DL1YCFsmall corrections related to CTUN
2020-01-04 DL1YCFRestart old protocol when changing the number of used...
2020-01-04 DL1YCFSupport for HermesLite V1/V2 discrimination
2020-01-01 John MeltonMerge pull request #89 from dl1ycf/master
2020-01-01 DL1YCFFix the call to getFrequencyInfo to reflect the current...
2020-01-01 DL1YCF60m band WRC15 corrections
2019-12-28 DL1YCFfixed typo.
2019-12-28 DL1YCFinclude HL calibration also in P2 although it is curren...
2019-12-28 DL1YCFremoved old RADIOBERRY att value specification
2019-12-28 DL1YCFstore "HermesLite" calibration in a variable (no hard...
2019-12-27 DL1YCFnow in the documentation folder
2019-12-27 DL1YCFSupport for HermesLite
2019-12-20 c vwa) renamed "midi.inp" to "midi.props"
next