From: zooko Date: Sat, 4 Dec 2010 19:00:54 +0000 (+0530) Subject: docs: update docs and metadata X-Git-Url: https://git.rkrishnan.org/listings/vdrive/%3C?a=commitdiff_plain;h=f9f6fe78d7da8f360d67cce9844a6d8b996dc0e5;p=tahoe-lafs%2Fzfec.git docs: update docs and metadata Ignore-this: 2d00ae4418ae817ccc0e5838818683a7 darcs-hash:4df3a64cd36607211b8d4d612e49fca62d36c409 --- diff --git a/zfec/README.rst b/zfec/README.rst new file mode 100644 index 0000000..77f1f39 --- /dev/null +++ b/zfec/README.rst @@ -0,0 +1,303 @@ +zfec +==== + +Efficient, portable, programmable erasure coding a.k.a. forward error +correction. Generate redundant blocks of information such that if some +of the blocks are lost then the original data can be recovered from +the remaining blocks. This package includes command-line tools, C API, +Python API, and Haskell API. + + +Intro and Licence +----------------- + +This package implements an "erasure code", or "forward error correction code". + +You may use this package under the GNU General Public License, version 2 or, at +your option, any later version. You may use this package under the Transitive +Grace Period Public Licence, version 1.0 or, at your option, any later version. +(You may choose to use this package under the terms of either licence, at your +option.) See the file COPYING.GPL for the terms of the GNU General Public +License, version 2. See the file COPYING.TGPPL.html for the terms of the +Transitive Grace Period Public Licence, version 1.0. + +The most widely known example of an erasure code is the RAID-5 algorithm which +makes it so that in the event of the loss of any one hard drive, the stored data +can be completely recovered. The algorithm in the zfec package has a similar +effect, but instead of recovering from the loss of only a single element, it can +be parameterized to choose in advance the number of elements whose loss it can +tolerate. + +This package is largely based on the old "fec" library by Luigi Rizzo et al., +which is a mature and optimized implementation of erasure coding. The zfec +package makes several changes from the original "fec" package, including +addition of the Python API, refactoring of the C API to support zero-copy +operation, a few clean-ups and optimizations of the core code itself, and the +addition of a command-line tool named "zfec". + + +Installation +------------ + +This package is managed with the "setuptools" package management tool. To build +and install the package directly into your system, just run "python ./setup.py +install". If you prefer to keep the package limited to a specific directory so +that you can manage it yourself (perhaps by using the "GNU stow") tool, then +give it these arguments: "python ./setup.py install +--single-version-externally-managed +--record=${specificdirectory}/zfec-install.log --prefix=${specificdirectory}" + +To run the self-tests, execute "python ./setup.py test" (or if you have Twisted +Python installed, you can run "trial zfec" for nicer output and test options.) +This will run the tests of the C API, the Python API, and the command-line +tools. + +To run the tests of the Haskell API: + % runhaskell haskell/test/FECTest.hs + +Note that in order to run the Haskell API tests you must have installed the +library first due to the fact that the interpreter cannot process FEC.hs as it +takes a reference to an FFI function. + + +Community +--------- + +The source is currently available via darcs on the web with the command: + +darcs get http://allmydata.org/source/zfec/trunk + +More information on darcs is available at http://darcs.net + +Please join the zfec mailing list and submit patches: + + + + +Overview +-------- + +This package performs two operations, encoding and decoding. Encoding takes +some input data and expands its size by producing extra "check blocks", also +called "secondary blocks". Decoding takes some data -- any combination of +blocks of the original data (called "primary blocks") and "secondary blocks", +and produces the original data. + +The encoding is parameterized by two integers, k and m. m is the total number +of blocks produced, and k is how many of those blocks are necessary to +reconstruct the original data. m is required to be at least 1 and at most 256, +and k is required to be at least 1 and at most m. + +(Note that when k == m then there is no point in doing erasure coding -- it +degenerates to the equivalent of the Unix "split" utility which simply splits +the input into successive segments. Similarly, when k == 1 it degenerates to +the equivalent of the unix "cp" utility -- each block is a complete copy of the +input data.) + +Note that each "primary block" is a segment of the original data, so its size is +1/k'th of the size of original data, and each "secondary block" is of the same +size, so the total space used by all the blocks is m/k times the size of the +original data (plus some padding to fill out the last primary block to be the +same size as all the others). In addition to the data contained in the blocks +themselves there are also a few pieces of metadata which are necessary for later +reconstruction. Those pieces are: 1. the value of K, 2. the value of M, 3. +the sharenum of each block, 4. the number of bytes of padding that were used. +The "zfec" command-line tool compresses these pieces of data and prepends them +to the beginning of each share, so each the sharefile produced by the "zfec" +command-line tool is between one and four bytes larger than the share data +alone. + +The decoding step requires as input k of the blocks which were produced by the +encoding step. The decoding step produces as output the data that was earlier +input to the encoding step. + + +Command-Line Tool +----------------- + +The bin/ directory contains two Unix-style, command-line tools "zfec" and +"zunfec". Execute "zfec --help" or "zunfec --help" for usage instructions. + +Note: a Unix-style tool like "zfec" does only one thing -- in this case erasure +coding -- and leaves other tasks to other tools. Other Unix-style tools that go +well with zfec include "GNU tar" or "7z" a.k.a. "p7zip" for archiving multiple +files and directories into one file, "7z" or "rzip" for compression, and "GNU Privacy +Guard" for encryption or "sha256sum" for integrity. It is important to do +things in order: first archive, then compress, then either encrypt or sha256sum, +then erasure code. Note that if GNU Privacy Guard is used for privacy, then it +will also ensure integrity, so the use of sha256sum is unnecessary in that case. +Note that if 7z is used for archiving then it also does compression, so you +don't need a separate compressor in that case. + + +Performance +----------- + +On my Athlon 64 2.4 GHz workstation (running Linux), the "zfec" command-line +tool encoded a 160 MB file with m=100, k=94 (about 6% redundancy) in 3.9 +seconds, where the "par2" tool encoded the file with about 6% redundancy in 27 +seconds. zfec encoded the same file with m=12, k=6 (100% redundancy) in 4.1 +seconds, where par2 encoded it with about 100% redundancy in 7 minutes and 56 +seconds. + +The underlying C library in benchmark mode encoded from a file at about 4.9 +million bytes per second and decoded at about 5.8 million bytes per second. + +On Peter's fancy Intel Mac laptop (2.16 GHz Core Duo), it encoded from a file at +about 6.2 million bytes per second. + +On my even fancier Intel Mac laptop (2.33 GHz Core Duo), it encoded from a file +at about 6.8 million bytes per second. + +On my old PowerPC G4 867 MHz Mac laptop, it encoded from a file at about 1.3 +million bytes per second. + +Here is a paper analyzing the performance of various erasure codes and their +implementations, including zfec: + +http://www.usenix.org/events/fast09/tech/full_papers/plank/plank.pdf + +Zfec shows good performance on different machines and with different values of +K and M. It also has a nice small memory footprint. + + +API +--- + +Each block is associated with "blocknum". The blocknum of each primary block is +its index (starting from zero), so the 0'th block is the first primary block, +which is the first few bytes of the file, the 1'st block is the next primary +block, which is the next few bytes of the file, and so on. The last primary +block has blocknum k-1. The blocknum of each secondary block is an arbitrary +integer between k and 255 inclusive. (When using the Python API, if you don't +specify which secondary blocks you want when invoking encode(), then it will by +default provide the blocks with ids from k to m-1 inclusive.) + +- C API + + fec_encode() takes as input an array of k pointers, where each + pointer points to a memory buffer containing the input data (i.e., + the i'th buffer contains the i'th primary block). There is also a + second parameter which is an array of the blocknums of the secondary + blocks which are to be produced. (Each element in that array is + required to be the blocknum of a secondary block, i.e. it is + required to be >= k and < m.) + + The output from fec_encode() is the requested set of secondary + blocks which are written into output buffers provided by the caller. + + Note that this fec_encode() is a "low-level" API in that it requires + the input data to be provided in a set of memory buffers of exactly + the right sizes. If you are starting instead with a single buffer + containing all of the data then please see easyfec.py's "class + Encoder" as an example of how to split a single large buffer into + the appropriate set of input buffers for fec_encode(). If you are + starting with a file on disk, then please see filefec.py's + encode_file_stringy_easyfec() for an example of how to read the data + from a file and pass it to "class Encoder". The Python interface + provides these higher-level operations, as does the Haskell + interface. If you implement functions to do these higher-level + tasks in other languages than Python or Haskell, then please send a + patch to zfec-dev@allmydata.org so that your API can be included in + future releases of zfec. + + fec_decode() takes as input an array of k pointers, where each + pointer points to a buffer containing a block. There is also a + separate input parameter which is an array of blocknums, indicating + the blocknum of each of the blocks which is being passed in. + + The output from fec_decode() is the set of primary blocks which were + missing from the input and had to be reconstructed. These + reconstructed blocks are written into output buffers provided by the + caller. + + +- Python API + + encode() and decode() take as input a sequence of k buffers, where a + "sequence" is any object that implements the Python sequence + protocol (such as a list or tuple) and a "buffer" is any object that + implements the Python buffer protocol (such as a string or array). + The contents that are required to be present in these buffers are + the same as for the C API. + + encode() also takes a list of desired blocknums. Unlike the C API, + the Python API accepts blocknums of primary blocks as well as + secondary blocks in its list of desired blocknums. encode() returns + a list of buffer objects which contain the blocks requested. For + each requested block which is a primary block, the resulting list + contains a reference to the apppropriate primary block from the + input list. For each requested block which is a secondary block, + the list contains a newly created string object containing that + block. + + decode() also takes a list of integers indicating the blocknums of + the blocks being passed int. decode() returns a list of buffer + objects which contain all of the primary blocks of the original data + (in order). For each primary block which was present in the input + list, then the result list simply contains a reference to the object + that was passed in the input list. For each primary block which was + not present in the input, the result list contains a newly created + string object containing that primary block. + + Beware of a "gotcha" that can result from the combination of mutable + data and the fact that the Python API returns references to inputs + when possible. + + Returning references to its inputs is efficient since it avoids + making an unnecessary copy of the data, but if the object which was + passed as input is mutable and if that object is mutated after the + call to zfec returns, then the result from zfec -- which is just a + reference to that same object -- will also be mutated. This + subtlety is the price you pay for avoiding data copying. If you + don't want to have to worry about this then you can simply use + immutable objects (e.g. Python strings) to hold the data that you + pass to zfec. + +- Haskell API + + The Haskell code is fully Haddocked, to generate the documentation, run + % runhaskell Setup.lhs haddock + + +Utilities +--------- + +The filefec.py module has a utility function for efficiently reading a file and +encoding it piece by piece. This module is used by the "zfec" and "zunfec" +command-line tools from the bin/ directory. + + +Dependencies +------------ + +A C compiler is required. To use the Python API or the command-line +tools a Python interpreter is also required. We have tested it with +Python v2.4, v2.5, v2.6, and v2.7. For the Haskell interface, GHC >= +6.8.1 is required. + + +Acknowledgements +---------------- + +Thanks to the author of the original fec lib, Luigi Rizzo, and the folks that +contributed to it: Phil Karn, Robert Morelos-Zaragoza, Hari Thirumoorthy, and +Dan Rubenstein. Thanks to the Mnet hackers who wrote an earlier Python wrapper, +especially Myers Carpenter and Hauke Johannknecht. Thanks to Brian Warner and +Amber O'Whielacronx for help with the API, documentation, debugging, +compression, and unit tests. Thanks to Adam Langley for improving the C API and +contributing the Haskell API. Thanks to the creators of GCC (starting with +Richard M. Stallman) and Valgrind (starting with Julian Seward) for a pair of +excellent tools. Thanks to my coworkers at Allmydata -- http://allmydata.com -- +Fabrice Grinda, Peter Secor, Rob Kinninmont, Brian Warner, Zandr Milewski, +Justin Boreta, Mark Meras for sponsoring this work and releasing it under a Free +Software licence. Thanks to Jack Lloyd, Samuel Neves, and David-Sarah Hopwood. + + +Enjoy! + +Zooko Wilcox-O'Hearn + +2010-12-04 + +Boulder, Colorado diff --git a/zfec/README.txt b/zfec/README.txt deleted file mode 100644 index 8c3b51f..0000000 --- a/zfec/README.txt +++ /dev/null @@ -1,273 +0,0 @@ - * Intro and Licence - -This package implements an "erasure code", or "forward error correction code". - -You may use this package under the GNU General Public License, version 2 or, at -your option, any later version. You may use this package under the Transitive -Grace Period Public Licence, version 1.0 or, at your option, any later version. -(You may choose to use this package under the terms of either licence, at your -option.) See the file COPYING.GPL for the terms of the GNU General Public -License, version 2. See the file COPYING.TGPPL.html for the terms of the -Transitive Grace Period Public Licence, version 1.0. In addition, Allmydata, -Inc. offers other licensing terms. If you would like to inquire about a -commercial relationship with Allmydata, Inc., please contact -partnerships@allmydata.com and visit http://allmydata.com . - -The most widely known example of an erasure code is the RAID-5 algorithm which -makes it so that in the event of the loss of any one hard drive, the stored data -can be completely recovered. The algorithm in the zfec package has a similar -effect, but instead of recovering from the loss of only a single element, it can -be parameterized to choose in advance the number of elements whose loss it can -tolerate. - -This package is largely based on the old "fec" library by Luigi Rizzo et al., -which is a mature and optimized implementation of erasure coding. The zfec -package makes several changes from the original "fec" package, including -addition of the Python API, refactoring of the C API to support zero-copy -operation, a few clean-ups and optimizations of the core code itself, and the -addition of a command-line tool named "zfec". - - - * Installation - -This package is managed with the "setuptools" package management tool. To build -and install the package directly into your system, just run "python ./setup.py -install". If you prefer to keep the package limited to a specific directory so -that you can manage it yourself (perhaps by using the "GNU stow") tool, then -give it these arguments: "python ./setup.py install ---single-version-externally-managed ---record=${specificdirectory}/zfec-install.log --prefix=${specificdirectory}" - -To run the self-tests, execute "python ./setup.py test" (or if you have Twisted -Python installed, you can run "trial zfec" for nicer output and test options.) -This will run the tests of the C API, the Python API, and the command-line -tools. - -To run the tests of the Haskell API: - % runhaskell haskell/test/FECTest.hs - -Note that in order to run the Haskell API tests you must have installed the -library first due to the fact that the interpreter cannot process FEC.hs as it -takes a reference to an FFI function. - - - * Community - -The source is currently available via darcs on the web with the command: - -darcs get http://allmydata.org/source/zfec/trunk - -More information on darcs is available at http://darcs.net - -Please join the zfec mailing list and submit patches: - - - - - * Overview - -This package performs two operations, encoding and decoding. Encoding takes -some input data and expands its size by producing extra "check blocks", also -called "secondary blocks". Decoding takes some data -- any combination of -blocks of the original data (called "primary blocks") and "secondary blocks", -and produces the original data. - -The encoding is parameterized by two integers, k and m. m is the total number -of blocks produced, and k is how many of those blocks are necessary to -reconstruct the original data. m is required to be at least 1 and at most 256, -and k is required to be at least 1 and at most m. - -(Note that when k == m then there is no point in doing erasure coding -- it -degenerates to the equivalent of the Unix "split" utility which simply splits -the input into successive segments. Similarly, when k == 1 it degenerates to -the equivalent of the unix "cp" utility -- each block is a complete copy of the -input data.) - -Note that each "primary block" is a segment of the original data, so its size is -1/k'th of the size of original data, and each "secondary block" is of the same -size, so the total space used by all the blocks is m/k times the size of the -original data (plus some padding to fill out the last primary block to be the -same size as all the others). In addition to the data contained in the blocks -themselves there are also a few pieces of metadata which are necessary for later -reconstruction. Those pieces are: 1. the value of K, 2. the value of M, 3. -the sharenum of each block, 4. the number of bytes of padding that were used. -The "zfec" command-line tool compresses these pieces of data and prepends them -to the beginning of each share, so each the sharefile produced by the "zfec" -command-line tool is between one and four bytes larger than the share data -alone. - -The decoding step requires as input k of the blocks which were produced by the -encoding step. The decoding step produces as output the data that was earlier -input to the encoding step. - - - * Command-Line Tool - -The bin/ directory contains two Unix-style, command-line tools "zfec" and -"zunfec". Execute "zfec --help" or "zunfec --help" for usage instructions. - -Note: a Unix-style tool like "zfec" does only one thing -- in this case erasure -coding -- and leaves other tasks to other tools. Other Unix-style tools that go -well with zfec include "GNU tar" or "7z" a.k.a. "p7zip" for archiving multiple -files and directories into one file, "7z" or "rzip" for compression, and "GNU Privacy -Guard" for encryption or "sha256sum" for integrity. It is important to do -things in order: first archive, then compress, then either encrypt or sha256sum, -then erasure code. Note that if GNU Privacy Guard is used for privacy, then it -will also ensure integrity, so the use of sha256sum is unnecessary in that case. -Note that if 7z is used for archiving then it also does compression, so you -don't need a separate compressor in that case. - - - * Performance - -On my Athlon 64 2.4 GHz workstation (running Linux), the "zfec" command-line -tool encoded a 160 MB file with m=100, k=94 (about 6% redundancy) in 3.9 -seconds, where the "par2" tool encoded the file with about 6% redundancy in 27 -seconds. zfec encoded the same file with m=12, k=6 (100% redundancy) in 4.1 -seconds, where par2 encoded it with about 100% redundancy in 7 minutes and 56 -seconds. - -The underlying C library in benchmark mode encoded from a file at about 4.9 -million bytes per second and decoded at about 5.8 million bytes per second. - -On Peter's fancy Intel Mac laptop (2.16 GHz Core Duo), it encoded from a file at -about 6.2 million bytes per second. - -On my even fancier Intel Mac laptop (2.33 GHz Core Duo), it encoded from a file -at about 6.8 million bytes per second. - -On my old PowerPC G4 867 MHz Mac laptop, it encoded from a file at about 1.3 -million bytes per second. - -Here is a paper analyzing the performance of various erasure codes and their -implementations, including zfec: - -http://www.usenix.org/events/fast09/tech/full_papers/plank/plank.pdf - -Zfec shows good performance on different machines and with different values of -K and M. It also has a nice small memory footprint. - - - * API - -Each block is associated with "blocknum". The blocknum of each primary block is -its index (starting from zero), so the 0'th block is the first primary block, -which is the first few bytes of the file, the 1'st block is the next primary -block, which is the next few bytes of the file, and so on. The last primary -block has blocknum k-1. The blocknum of each secondary block is an arbitrary -integer between k and 255 inclusive. (When using the Python API, if you don't -specify which secondary blocks you want when invoking encode(), then it will by -default provide the blocks with ids from k to m-1 inclusive.) - - ** C API - -fec_encode() takes as input an array of k pointers, where each pointer points to -a memory buffer containing the input data (i.e., the i'th buffer contains the -i'th primary block). There is also a second parameter which is an array of the -blocknums of the secondary blocks which are to be produced. (Each element in -that array is required to be the blocknum of a secondary block, i.e. it is -required to be >= k and < m.) - -The output from fec_encode() is the requested set of secondary blocks which are -written into output buffers provided by the caller. - -Note that this fec_encode() is a "low-level" API in that it requires the input -data to be provided in a set of memory buffers of exactly the right sizes. If -you are starting instead with a single buffer containing all of the data then -please see easyfec.py's "class Encoder" as an example of how to split a single -large buffer into the appropriate set of input buffers for fec_encode(). If you -are starting with a file on disk, then please see filefec.py's -encode_file_stringy_easyfec() for an example of how to read the data from a file -and pass it to "class Encoder". The Python interface provides these -higher-level operations, as does the Haskell interface. If you implement -functions to do these higher-level tasks in other languages than Python or -Haskell, then please send a patch to zfec-dev@allmydata.org so that your API can -be included in future releases of zfec. - - -fec_decode() takes as input an array of k pointers, where each pointer points to -a buffer containing a block. There is also a separate input parameter which is -an array of blocknums, indicating the blocknum of each of the blocks which is -being passed in. - -The output from fec_decode() is the set of primary blocks which were missing -from the input and had to be reconstructed. These reconstructed blocks are -written into output buffers provided by the caller. - - - ** Python API - -encode() and decode() take as input a sequence of k buffers, where a "sequence" -is any object that implements the Python sequence protocol (such as a list or -tuple) and a "buffer" is any object that implements the Python buffer protocol -(such as a string or array). The contents that are required to be present in -these buffers are the same as for the C API. - -encode() also takes a list of desired blocknums. Unlike the C API, the Python -API accepts blocknums of primary blocks as well as secondary blocks in its list -of desired blocknums. encode() returns a list of buffer objects which contain -the blocks requested. For each requested block which is a primary block, the -resulting list contains a reference to the apppropriate primary block from the -input list. For each requested block which is a secondary block, the list -contains a newly created string object containing that block. - -decode() also takes a list of integers indicating the blocknums of the blocks -being passed int. decode() returns a list of buffer objects which contain all -of the primary blocks of the original data (in order). For each primary block -which was present in the input list, then the result list simply contains a -reference to the object that was passed in the input list. For each primary -block which was not present in the input, the result list contains a newly -created string object containing that primary block. - -Beware of a "gotcha" that can result from the combination of mutable data and -the fact that the Python API returns references to inputs when possible. - -Returning references to its inputs is efficient since it avoids making an -unnecessary copy of the data, but if the object which was passed as input is -mutable and if that object is mutated after the call to zfec returns, then the -result from zfec -- which is just a reference to that same object -- will also -be mutated. This subtlety is the price you pay for avoiding data copying. If -you don't want to have to worry about this then you can simply use immutable -objects (e.g. Python strings) to hold the data that you pass to zfec. - - ** Haskell API - -The Haskell code is fully Haddocked, to generate the documentation, run - % runhaskell Setup.lhs haddock - - - * Utilities - -The filefec.py module has a utility function for efficiently reading a file and -encoding it piece by piece. This module is used by the "zfec" and "zunfec" -command-line tools from the bin/ directory. - - - * Dependencies - -A C compiler is required. To use the Python API or the command-line tools a -Python interpreter is also required. We have tested it with Python v2.4 and -v2.5. For the Haskell interface, GHC >= 6.8.1 is required. - - - * Acknowledgements - -Thanks to the author of the original fec lib, Luigi Rizzo, and the folks that -contributed to it: Phil Karn, Robert Morelos-Zaragoza, Hari Thirumoorthy, and -Dan Rubenstein. Thanks to the Mnet hackers who wrote an earlier Python wrapper, -especially Myers Carpenter and Hauke Johannknecht. Thanks to Brian Warner and -Amber O'Whielacronx for help with the API, documentation, debugging, -compression, and unit tests. Thanks to Adam Langley for improving the C API and -contributing the Haskell API. Thanks to the creators of GCC (starting with -Richard M. Stallman) and Valgrind (starting with Julian Seward) for a pair of -excellent tools. Thanks to my coworkers at Allmydata -- http://allmydata.com -- -Fabrice Grinda, Peter Secor, Rob Kinninmont, Brian Warner, Zandr Milewski, -Justin Boreta, Mark Meras for sponsoring this work and releasing it under a Free -Software licence. Thanks to Jack Lloyd, Samuel Neves, and David-Sarah Hopwood. - - -Enjoy! - -Zooko Wilcox-O'Hearn -2010-05-24 -Boulder, Colorado diff --git a/zfec/fec.cabal b/zfec/fec.cabal index 0648204..9043b96 100644 --- a/zfec/fec.cabal +++ b/zfec/fec.cabal @@ -1,7 +1,7 @@ name: fec version: 0.1.1 license: GPL -license-file: README.txt +license-file: README.rst author: Adam Langley maintainer: Adam Langley description: This code, based on zfec by Zooko, based on code by Luigi diff --git a/zfec/haskell/Codec/FEC.hs b/zfec/haskell/Codec/FEC.hs index b3b5db7..a389eff 100644 --- a/zfec/haskell/Codec/FEC.hs +++ b/zfec/haskell/Codec/FEC.hs @@ -2,7 +2,7 @@ -- | -- Module: Codec.FEC -- Copyright: Adam Langley --- License: GPLv2+|TGPPLv1+ (see README.txt for details) +-- License: GPLv2+|TGPPLv1+ (see README.rst for details) -- -- Stability: experimental -- diff --git a/zfec/setup.py b/zfec/setup.py index c45b144..f3474d9 100755 --- a/zfec/setup.py +++ b/zfec/setup.py @@ -7,7 +7,7 @@ # # This file is part of zfec. # -# See README.txt for licensing information. +# See README.rst for licensing information. import glob, os, re, sys @@ -133,42 +133,30 @@ if "--reporter=bwverbose-coverage" in sys.argv: if "sdist_dsc" in sys.argv: setup_requires.append('stdeb') -data_fnames=[ 'COPYING.GPL', 'changelog', 'COPYING.TGPPL.html', 'TODO', 'README.txt' ] +data_fnames=[ 'COPYING.GPL', 'changelog', 'COPYING.TGPPL.html', 'TODO', 'README.rst' ] # In case we are building for a .deb with stdeb's sdist_dsc command, we put the # docs in "share/doc/$PKG". doc_loc = "share/doc/" + PKG data_files = [(doc_loc, data_fnames)] -def _setup(test_suite): - setup(name=PKG, - version=verstr, - description='a fast erasure codec which can be used with the command-line, C, Python, or Haskell', - long_description='Fast, portable, programmable erasure coding a.k.a. "forward error correction": the generation of redundant blocks of information such that if some blocks are lost then the original data can be recovered from the remaining blocks. The zfec package includes command-line tools, C API, Python API, and Haskell API', - author='Zooko O\'Whielacronx', - author_email='zooko@zooko.com', - url='http://allmydata.org/trac/'+PKG, - license='GNU GPL', - install_requires=["argparse >= 0.8", "pyutil >= 1.3.19"], - tests_require=tests_require, - packages=find_packages(), - include_package_data=True, - data_files=data_files, - setup_requires=setup_requires, - classifiers=trove_classifiers, - entry_points = { 'console_scripts': [ 'zfec = %s.cmdline_zfec:main' % PKG, 'zunfec = %s.cmdline_zunfec:main' % PKG ] }, - ext_modules=[Extension(PKG+'._fec', [PKG+'/fec.c', PKG+'/_fecmodule.c',], extra_link_args=extra_link_args, extra_compile_args=extra_compile_args, undef_macros=undef_macros, define_macros=define_macros),], - test_suite=test_suite, - zip_safe=False, # I prefer unzipped for easier access. - ) - -test_suite_name=PKG+".test" -try: - _setup(test_suite=test_suite_name) -except Exception, le: - # to work around a bug in Elisa v0.3.5 - # https://bugs.launchpad.net/elisa/+bug/263697 - if "test_suite must be a list" in str(le): - _setup(test_suite=[test_suite_name]) - else: - raise +setup(name=PKG, + version=verstr, + description='a fast erasure codec which can be used with the command-line, C, Python, or Haskell', + long_description = open('README.rst').read(), + author='Zooko O\'Whielacronx', + author_email='zooko@zooko.com', + url='http://tahoe-lafs.org/trac/'+PKG, + license='GNU GPL', + install_requires=["argparse >= 0.8", "pyutil >= 1.3.19"], + tests_require=tests_require, + packages=find_packages(), + include_package_data=True, + data_files=data_files, + setup_requires=setup_requires, + classifiers=trove_classifiers, + entry_points = { 'console_scripts': [ 'zfec = %s.cmdline_zfec:main' % PKG, 'zunfec = %s.cmdline_zunfec:main' % PKG ] }, + ext_modules=[Extension(PKG+'._fec', [PKG+'/fec.c', PKG+'/_fecmodule.c',], extra_link_args=extra_link_args, extra_compile_args=extra_compile_args, undef_macros=undef_macros, define_macros=define_macros),], + test_suite=PKG+".test", + zip_safe=False, # I prefer unzipped for easier access. + ) diff --git a/zfec/zfec/__init__.py b/zfec/zfec/__init__.py index d3e742f..475acf9 100644 --- a/zfec/zfec/__init__.py +++ b/zfec/zfec/__init__.py @@ -28,4 +28,4 @@ quiet_pyflakes=[__version__, Error, Encoder, Decoder, cmdline_zunfec, filefec, c # # This file is part of zfec. # -# See README.txt for licensing information. +# See README.rst for licensing information. diff --git a/zfec/zfec/cmdline_zfec.py b/zfec/zfec/cmdline_zfec.py index c1389be..2eee2b0 100755 --- a/zfec/zfec/cmdline_zfec.py +++ b/zfec/zfec/cmdline_zfec.py @@ -69,4 +69,4 @@ def main(): # # This file is part of zfec. # -# See README.txt for licensing information. +# See README.rst for licensing information. diff --git a/zfec/zfec/cmdline_zunfec.py b/zfec/zfec/cmdline_zunfec.py index f7d7f0c..8fc0c04 100755 --- a/zfec/zfec/cmdline_zunfec.py +++ b/zfec/zfec/cmdline_zunfec.py @@ -63,4 +63,4 @@ def main(): # # This file is part of zfec. # -# See README.txt for licensing information. +# See README.rst for licensing information. diff --git a/zfec/zfec/easyfec.py b/zfec/zfec/easyfec.py index 997000a..dd209e7 100644 --- a/zfec/zfec/easyfec.py +++ b/zfec/zfec/easyfec.py @@ -61,4 +61,4 @@ class Decoder(object): # # This file is part of zfec. # -# See README.txt for licensing information. +# See README.rst for licensing information. diff --git a/zfec/zfec/fec.c b/zfec/zfec/fec.c index a18a4f6..751c00a 100644 --- a/zfec/zfec/fec.c +++ b/zfec/zfec/fec.c @@ -529,7 +529,7 @@ fec_decode(const fec_t* code, const gf*restrict const*restrict const inpkts, gf* * * This file is part of zfec. * - * See README.txt for licensing information. + * See README.rst for licensing information. */ /* diff --git a/zfec/zfec/fec.h b/zfec/zfec/fec.h index 2ebab32..249fe66 100644 --- a/zfec/zfec/fec.h +++ b/zfec/zfec/fec.h @@ -1,7 +1,7 @@ /** * zfec -- fast forward error correction library with Python interface * - * See README.txt for documentation. + * See README.rst for documentation. */ #include @@ -64,7 +64,7 @@ void fec_decode(const fec_t* code, const gf*restrict const*restrict const inpkts * * This file is part of zfec. * - * See README.txt for licensing information. + * See README.rst for licensing information. */ /* diff --git a/zfec/zfec/filefec.py b/zfec/zfec/filefec.py index 25b6513..48f3d9d 100644 --- a/zfec/zfec/filefec.py +++ b/zfec/zfec/filefec.py @@ -501,4 +501,4 @@ def encode_file_stringy_easyfec(inf, cb, k, m, chunksize=4096): # # This file is part of zfec. # -# See README.txt for licensing information. +# See README.rst for licensing information.