From: dttsp Date: Wed, 22 Jun 2005 20:18:43 +0000 (+0000) Subject: Add file missing from pyhw2 X-Git-Url: https://git.rkrishnan.org/pf/content/en/seg/biz/vdrive?a=commitdiff_plain;h=de0b344fae688f4613e8fa3746d8bb0a72abdfd7;p=dttsp.git Add file missing from pyhw2 --- diff --git a/pyhw2/hardware.h b/pyhw2/hardware.h new file mode 100644 index 0000000..c0e4d7f --- /dev/null +++ b/pyhw2/hardware.h @@ -0,0 +1,393 @@ +// hardware.h +// version 2 + +#ifndef _hardware_h +#define _hardware_h + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#ifndef PRIVATE +#define PRIVATE static +#endif +#ifndef PUBLIC +#define PUBLIC extern +#endif + +typedef int BOOL; +typedef unsigned char BYTE; + +#ifndef FALSE +#define FALSE 0 +#endif + +#ifndef TRUE +#define TRUE 1 +#endif + +PUBLIC double DttSP_SampleRate; + +typedef enum { + IARU1 = 1, + IARU2 = 2, + IARU3 = 3, +} BandPlan; + +typedef enum { + BYPASS, + MEMORY, + FULL, + LAST, +} ATUTuneMode; + +typedef enum { + POSITIVE = 0, // DEMI144-28FRS + NEGATIVE, // 25W DEMI + NONE, // For Elecraft or similar XVTR +} XVTRTRMode; + +// Constants for BPF relays +typedef enum { + bsnone = 0, //none + bs0 = 0x01, //2.5MHz LPF + bs1 = 0x02, //2-6MHz BPF + bs2 = 0x08, //5-12MHz BPF + bs3 = 0x04, //10-24MHz BPF + bs4 = 0x10, //20-40MHz BPF + bs5 = 0x20, //35-60MHz BPF +} BandSetting; + +// PIO Control Pin Numbers +typedef enum { + EXT = 1, //C0 + BPF = 14, //C1 + DAT = 16, //C2 + ADR = 17, //C3 +} CtrlPin; + +// PIO Status Mask +typedef enum { + PIN_12 = 0x08, //S3 + Dash = 0x10, //S4 + Dot = 0x20, //S5 + PA_DATA = 0x40, //S6 + PIN_11 = 0x80, //S7 +} StatusPin; + +// External control port mask +typedef enum { + P1 = 0x01, + P2 = 0x02, + P3 = 0x04, + P4 = 0x08, + P5 = 0x10, + P6 = 0x20, + P7 = 0x40, +} ExtPin; + +// RFE CONTROLS: + +// Control and data lines for RFE serial decoders +#define SER 0x01 +#define SCK 0x02 +#define SCLR_NOT 0x04 +#define DCDR_NE 0x20 + +// RFE 1:4 Decoder (74HC139) values to drive shift register RCK lines +typedef enum { + IC11 = 0x00, + IC7 = 0x08, + IC9 = 0x18, + IC10 = 0x10, +} RFE_RCK; + +// RFE control constants + +// On board low pass filter relays +#define LPF0 0x01 +#define LPF1 0x02 +#define LPF2 0x04 +#define LPF3 0x08 +#define LPF4 0x10 +#define LPF5 0x20 +#define LPF6 0x40 +#define LPF7 0x80 +#define LPF8 0x01 +#define LPF9 0x02 + +// Band pass filter relays +#define BPF0 0x80 +#define BPF1 0x40 +// Note: BPF2 and BPF3 are reverse order +// on BPF board +#define BPF2 0x10 +#define BPF3 0x20 +#define BPF4 0x08 +#define BPF5 0x04 + +// IC11 Variables +// Register memory for IC11 +PUBLIC int ic11_memory; +// Power Amplifier low pass filters +#define PAF0 0x01 +#define PAF1 0x02 +#define PAF2 0x04 +// Analog to Digital Clock +#define ADC_CLK 0x08 +// Analog to Digital Data In +#define ADC_DI 0x10 +// Analog to Digital Chip Select (inverse logic) +#define ADC_CS_NOT 0x20 +// Power amplifier TR relay +#define PATR 0x40 +// Automatic Tuning Unit control +#define ATUCTL 0x80 + +// IC7 Variables +// Register memory for IC7 +PUBLIC int ic7_memory; +// Controls both AMP1 and AMP2 relays +#define AMP_RLYS 0x03 +// 2M transverter TR relay (on for RX) XVRX on schematic +#define XVTR_TR_RLY 0x04 +// Switches 2M transverter switching relay into signal path +#define XVTR_RLY 0x08 +// Attenuator relay +#define ATTN_RLY 0x10 +// Impulse circuit switches impulse into signal path +#define IMPULSE_RLY 0x20 +// Spare control line to PA (inverse logic) +#define PA_BIAS_NOT 0x40 +// Generates 5ns Pulse +#define IMPULSE 0x80 + +PUBLIC BOOL rfe_enabled; // True if RFE board is enabled +PUBLIC BOOL xvtr_enabled; // Transverter is enabled + +// done with RFE controls + +// PA variables +PUBLIC BOOL pa_enabled; +// 0 +#define PA_LPF_OFF 0 +// 1 +#define PA_LPF_12_10 PAF0 +// 2 +#define PA_LPF_17_15 PAF1 +// 3 +#define PA_LPF_30_20 PAF0+PAF1 +// 4 +#define PA_LPF_60_40 PAF2 +// 5 +#define PA_LPF_80 PAF2+PAF0 +// 6 +#define PA_LPF_160 PAF2+PAF1 +#define PA_FORWARD_PWR 0 +#define PA_REVERSE_PWR 1 + +// Constants latch outputs +#define TR 0x40 +#define MUTE 0x80 +#define GAIN 0x80 +#define WRB 0x40 +#define RESET 0x80 + +// Latch Memories +PUBLIC BandSetting band_relay; +PUBLIC int external_output; +PUBLIC int mute_relay; +PUBLIC int transmit_relay; +PUBLIC int gain_relay; +PUBLIC int latch_delay; + +// DDS Control Constants +// DDS Comparator power down +#define COMP_PD 0x10 +// DDS Digital Power down +#define DIG_PD 0x01 +// Bypass DDS PLL +#define BYPASS_PLL 0x20 +// Internal IO Update +#define INT_IOUD 0x01 +// Offset Shift Keying enable +#define OSK_EN 0x20 +// Offset Shift Keying +#define OSK_INT 0x10 +// Bypass Inverse Sinc Filter +#define BYPASS_SINC 0x40 +// Set PLL Range +#define PLL_RANGE 0x40 + +// DDS Clock properties +PUBLIC double dds_clock; +PUBLIC int pll_mult; +PUBLIC double dds_clock_correction; +PUBLIC double sysClock; +PUBLIC int ioud_clock; +PUBLIC ushort dac_mult; + +// DDS Frequency Control properties +PUBLIC double dds_freq; +PUBLIC double if_freq; +PUBLIC BOOL if_shift; +PUBLIC BOOL spur_reduction; +PUBLIC double dds_step_size; +PUBLIC int sample_rate; +PUBLIC int fft_length; +PUBLIC double FFT_Bin_Size; +PUBLIC int tune_fft; +PUBLIC double tune_frac_rel; +PUBLIC double vfo_offset; +//extern double last_VFO; + +PUBLIC double min_freq; +PUBLIC double max_freq; + +// PIO register base address +PUBLIC u_short baseAdr; + +// Current Bandplan +PUBLIC BandPlan curBandPlan; + +PUBLIC double TWO_TO_THE_48_DIVIDED_BY_200; +PUBLIC long last_tuning_word; +// private Mutex parallel_mutex; +// private Mutex dataline_mutex; + +PUBLIC BOOL usb_enabled; + +#define SDR1K_LATCH_EXT 0x01 +#define SDR1K_LATCH_BPF 0x02 + +//------------------------------------------------------------------------ + +PUBLIC BOOL openPort(char *port); +PUBLIC void closePort(void); +PUBLIC void USB_Sdr1kLatch(int, BYTE); +PUBLIC BYTE USB_Sdr1kGetStatusPort(void); +PUBLIC int USB_Sdr1kGetADC(void); +PUBLIC void USB_Sdr1kDDSReset(void); +PUBLIC void USB_Sdr1kDDSWrite(BYTE addr, BYTE data); +PUBLIC void USB_Sdr1kSRLoad(BYTE reg, BYTE data); +PUBLIC void DttSP_ChangeOsc(double val); + +PUBLIC void Init (void); +PUBLIC void PowerOn (void); +PUBLIC void StandBy (void); +PUBLIC void Impulse (void); + +PUBLIC BYTE StatusPort (void); +PUBLIC void SetExt (ExtPin pin); +PUBLIC void ResExt (ExtPin pin); +PUBLIC BOOL PinValue (ExtPin pin); +PUBLIC void SetBPF (double vfo_value); +PUBLIC void TestPort (void); +PUBLIC void RCKStrobe (BOOL ClearReg, RFE_RCK Reg); +PUBLIC void SRLoad (RFE_RCK Reg, int Data); +PUBLIC void ResetRFE (void); +PUBLIC void PA_SetLPF (int i); +PUBLIC BYTE PA_GetADC (int chan); +PUBLIC BOOL PA_ATUTune (ATUTuneMode mode); + +PUBLIC BOOL getEnableLPF0 (void); +PUBLIC void setEnableLPF0 (BOOL value); +PUBLIC BOOL getExtended (void); +PUBLIC void setExtended (BOOL value); +PUBLIC BOOL getX2Enabled (void); +PUBLIC void setX2Enabled (BOOL value); +PUBLIC int getX2Delay (void); +PUBLIC void setX2Delay (int value); +PUBLIC BOOL getRFE_Enabled (void); +PUBLIC void setRFE_Enabled (BOOL value); +PUBLIC BOOL getPA_Enabled (void); +PUBLIC void setPA_Enabled (BOOL value); +PUBLIC BOOL getXVTR_Enabled (void); +PUBLIC BOOL setXVTR_Enabled (BOOL value); +PUBLIC BOOL getUSB_Enabled (void); +PUBLIC void setUSB_Enabled (BOOL value); +PUBLIC XVTRTRMode getCurrentXVTRTRMode (void); +PUBLIC void setCurrentXVTRTRMode (XVTRTRMode value); +PUBLIC int getLatchDelay (void); +PUBLIC void setLatchDelay (int value); +PUBLIC double getMinFreq (void); +PUBLIC double getMaxFreq (void); +PUBLIC u_short getBaseAddr (void); +PUBLIC u_short setBaseAddr (u_short value); +PUBLIC BandSetting getBandRelay (void); +PUBLIC void setBandRelay (BandSetting value); +PUBLIC BOOL getTransmitRelay (void); +PUBLIC void setTransmitRelay (BOOL value); +PUBLIC BOOL getMuteRelay (void); +PUBLIC void setMuteRelay (BOOL value); +PUBLIC BOOL getGainRelay (void); +PUBLIC void setGainRelay (BOOL value); +PUBLIC int getExternalOutput (void); +PUBLIC void setExternalOutput (int value); +PUBLIC double getDDSClockCorrection (void); +PUBLIC void setDDSClockCorrection (double value); +PUBLIC int getPLLMult (void); +PUBLIC void setPLLMult (int value); +PUBLIC double getDDSClock (void); +PUBLIC void setDDSClock (double value); +PUBLIC BOOL getIFShift (void); +PUBLIC void setIFShift (BOOL value); +PUBLIC BOOL getSpurReduction (void); +PUBLIC BOOL setSpurReduction (BOOL value); +PUBLIC double getIFFreq (void); +PUBLIC void setIFFreq (double value); +PUBLIC double getDDSFreq (void); +PUBLIC void setDDSFreq (double value); +PUBLIC int getSampleRate (void); +PUBLIC void setSampleRate (int value); +PUBLIC int getFFTLength (void); +PUBLIC void setFFTLength (int value); +PUBLIC int getTuneFFT (void); +PUBLIC double getTuneFracRel (void); +PUBLIC double getVFOOffset (void); +PUBLIC void setVFOOffset (double value); +PUBLIC int getIOUDClock (void); +PUBLIC void setIOUDClock (int value); +PUBLIC u_short getDACMult (void); +PUBLIC void setDACMult (u_short value); +PUBLIC BOOL getAMP_Relay (void); +PUBLIC BOOL setAMP_Relay (BOOL value); +PUBLIC BOOL getATTN_Relay (void); +PUBLIC void setATTN_Relay (BOOL value); +PUBLIC BOOL getXVTR_TR_Relay (void); +PUBLIC BOOL setXVTR_TR_Relay (BOOL value); +PUBLIC BOOL getXVTR_Relay (void); +PUBLIC BOOL setXVTR_Relay (BOOL value); +PUBLIC BOOL getIMPULSE_Relay (void); +PUBLIC BOOL setIMPULSE_Relay (BOOL value); +PUBLIC BOOL getPA_TransmitRelay (void); +PUBLIC BOOL setPA_TransmitRelay (BOOL value); +PUBLIC BOOL getPA_BiasOn (void); +PUBLIC BOOL setPA_BiasOn (BOOL value); + +//------------------------------------------------------------------------ + +#endif