Fix gpio bug. Fix SoapySDR devices Gain settings.

diff --git a/release/pihpsdr/64-limesuite.rules b/release/pihpsdr/64-limesuite.rules
deleted file mode 100644 (file)
index 9093aa6..0000000
--- a/release/pihpsdr/64-limesuite.rules
+++ /dev/null
@@ -1,5 +0,0 @@
-SUBSYSTEM=="usb", ATTR{idVendor}=="04b4", ATTR{idProduct}=="8613", SYMLINK+="stream-%k", MODE="666"
-SUBSYSTEM=="usb", ATTR{idVendor}=="04b4", ATTR{idProduct}=="00f1", SYMLINK+="stream-%k", MODE="666"
-SUBSYSTEM=="usb", ATTR{idVendor}=="0403", ATTR{idProduct}=="601f", SYMLINK+="stream-%k", MODE="666"
-SUBSYSTEM=="usb", ATTR{idVendor}=="1d50", ATTR{idProduct}=="6108", SYMLINK+="stream-%k", MODE="666"
-SUBSYSTEM=="xillybus", MODE="666", OPTIONS="last_rule"

diff --git a/release/pihpsdr/SoapySDR/modules0.8/libLMS7Support.so b/release/pihpsdr/SoapySDR/modules0.8/libLMS7Support.so
deleted file mode 100644 (file)
index 869fe19..0000000
Binary files a/release/pihpsdr/SoapySDR/modules0.8/libLMS7Support.so and /dev/null differ

diff --git a/release/pihpsdr/SoapySDR/modules0.8/librtlsdrSupport.so b/release/pihpsdr/SoapySDR/modules0.8/librtlsdrSupport.so
deleted file mode 100644 (file)
index d607e4f..0000000
Binary files a/release/pihpsdr/SoapySDR/modules0.8/librtlsdrSupport.so and /dev/null differ

diff --git a/release/pihpsdr/libLimeSuite.so.19.04.1 b/release/pihpsdr/libLimeSuite.so.19.04.1
deleted file mode 100644 (file)
index c63fe92..0000000
Binary files a/release/pihpsdr/libLimeSuite.so.19.04.1 and /dev/null differ

diff --git a/release/pihpsdr/libSoapySDR.so.0.8.0 b/release/pihpsdr/libSoapySDR.so.0.8.0
deleted file mode 100644 (file)
index b3a950f..0000000
Binary files a/release/pihpsdr/libSoapySDR.so.0.8.0 and /dev/null differ

diff --git a/release/pihpsdr/midi.inp b/release/pihpsdr/midi.inp
deleted file mode 100644 (file)
index cb0ddce..0000000
--- a/release/pihpsdr/midi.inp
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-# Sample midi.inp file, suitable for a Behringer CMD PL-1 MIDI controller
-#
-# Note that the Attenuator is implemented twice, as a key and as a wheel
-# The key is suitable for radios with a step (ALEX) attenuator, the wheel
-# fits best for radios with a programmable attenuator (0-31 dB).
-# The button (Key 2) also works for STEMlab and CHARLY25
-#
-# The preamp button (Key 1) only has function with STEMlab and CHARLY25
-#
-# Do not assign the "Key" with number 31. You will unintentionally
-# "push" it most of the times you change the VFO frequency.
-#
-# NOTE: we could just leave out all lines with ACTION=NONE. In this case
-#       a diagnostic message ("unknown MIDI event") is printed to stderr.
-#
-DEVICE=CMD PL-1
-#
-# Big Wheel and Big Slider
-#
-CTRL=31 WHEEL THR=59 61 63 65 67 69 ACTION=VFO           # Big wheel:    : main VFO knob
-KEY=31 ACTION=NONE                                       # Button integrated in the big wheel (do not assign)
-PITCH ACTION=AFGAIN                                      # Big slider    : AF gain
-#
-# 8 Knobs (top left).
-# Note that you can push each knob and this generates
-# Note On/Off messages for KEY=0...8 which we do not
-# assign: we want to glue labels on the Controller and therefore
-# we do not have two labels per knob.
-#
-CTRL=0 WHEEL THR=-1 -1 63 65 128 128 ACTION=ATT          # Knob 1        : RX att
-KEY=0                                ACTION=NONE         # Push Knob 1   : (unassigned)
-CTRL=1 WHEEL THR=-1 -1 63 65 128 128 ACTION=COMPRESS     # Knob 2        : TX compression
-KEY=1                                ACTION=NONE         # Push Knob 1   : (unassigned)
-CTRL=2 WHEEL THR=-1 -1 63 65 128 128 ACTION=RITVAL       # Knob 3        : RIT value
-KEY=2                                ACTION=NONE         # Push Knob 1   : (unassigned)
-CTRL=3 WHEEL THR=-1 -1 63 65 128 128 ACTION=PANLOW       # Knob 4        : Panadapter low
-KEY=4                                ACTION=NONE         # Push Knob 1   : (unassigned)
-CTRL=4 WHEEL THR=-1 -1 63 65 128 128 ACTION=AGC          # Knob 5        : AGC
-KEY=4                                ACTION=NONE         # Push Knob 1   : (unassigned)
-CTRL=5 WHEEL THR=-1 -1 63 65 128 128 ACTION=MICGAIN      # Knob 6        : MIC gain
-KEY=5                                ACTION=NONE         # Push Knob 1   : (unassigned)
-CTRL=6 WHEEL THR=-1 -1 63 65 128 128 ACTION=RFPOWER      # Knob 7        : TX drive
-KEY=6                                ACTION=NONE         # Push Knob 1   : (unassigned)
-CTRL=7 WHEEL THR=-1 -1 63 65 128 128 ACTION=FILTERUP     # Knob 8        : cycle through the filters
-KEY=7                                ACTION=NONE         # Push Knob 1   : (unassigned)
-#
-# 8 Keys (below the 8 Knobs)
-#
-KEY=16 ACTION=PREAMP                                    # Key 1         : Cycle through Preamp settings
-KEY=17 ACTION=ATT                                       # Key 2         : Cycle through ATT (Alex ATT) settings
-KEY=18 ACTION=RITCLEAR                                          # Key 3         : Clear RIT value and disable RIT
-KEY=19 ACTION=CTUN                                      # Key 4         : toggle CTUN
-KEY=20 ACTION=NOISEBLANKER                              # Key 5         : cycle through NB settings
-KEY=21 ACTION=NOISEREDUCTION                            # Key 6         : cycle through NR settings
-KEY=22 ACTION=VOX                                       # Key 7         : toggle VOX
-KEY=23 ACTION=AGCATTACK                                         # Key 8         : cycle AGC fast/medium/slow
-#
-# "other" keys
-# Note that the "DECK" key switches the MIDI channel of the device.
-#
-KEY=24 ACTION=TUNE                                       # LOAD    button: TUNE on/off
-KEY=25 ACTION=LOCK                                       # LOCK    button: Lock VFO(s)
-KEY=26 ACTION=PURESIGNAL                                 # DECK    button: toggle PURESIGNAL
-KEY=27 ACTION=SWAPVFO                                   # SCRATCH button: Swap VFOs A and B
-KEY=31 ACTION=NONE                                       # Button integrated in the big wheel (do not assign)
-KEY=32 ACTION=VFOA2B                                     # SYNC    button: Frequency VFO A -> VFO B
-KEY=33 ACTION=VFOB2A                                     # TAP     button: Frequency VFO B -> VFO A
-KEY=34 ACTION=MOX                                        # CUE     button: MOX on/off
-KEY=35 ACTION=SPLIT                                      # >||     button: toggle Split
-KEY=36 ACTION=MODEDOWN                                  # <<      button: Mode down
-KEY=37 ACTION=MODEUP                                    # >>      button: Mode up
-KEY=38 ACTION=BANDDOWN                                  # -       button: Band down
-KEY=39 ACTION=BANDUP                                    # +       button: Band up

diff --git a/release/pihpsdr/udev-rules/64-limesuite.rules b/release/pihpsdr/udev-rules/64-limesuite.rules
deleted file mode 100644 (file)
index 9093aa6..0000000
--- a/release/pihpsdr/udev-rules/64-limesuite.rules
+++ /dev/null
@@ -1,5 +0,0 @@
-SUBSYSTEM=="usb", ATTR{idVendor}=="04b4", ATTR{idProduct}=="8613", SYMLINK+="stream-%k", MODE="666"
-SUBSYSTEM=="usb", ATTR{idVendor}=="04b4", ATTR{idProduct}=="00f1", SYMLINK+="stream-%k", MODE="666"
-SUBSYSTEM=="usb", ATTR{idVendor}=="0403", ATTR{idProduct}=="601f", SYMLINK+="stream-%k", MODE="666"
-SUBSYSTEM=="usb", ATTR{idVendor}=="1d50", ATTR{idProduct}=="6108", SYMLINK+="stream-%k", MODE="666"
-SUBSYSTEM=="xillybus", MODE="666", OPTIONS="last_rule"

diff --git a/release/pihpsdr/udev-rules/install.sh b/release/pihpsdr/udev-rules/install.sh
deleted file mode 100755 (executable)
index 51886ef..0000000
--- a/release/pihpsdr/udev-rules/install.sh
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-cp 64-limesuite.rules /etc/udev/rules.d/
-udevadm control --reload-rules
-udevadm trigger