From: Zooko O'Whielacronx Date: Tue, 10 Jun 2008 23:24:25 +0000 (-0700) Subject: docs: [source:docs/known_issues.txt] X-Git-Tag: allmydata-tahoe-1.1.0~21 X-Git-Url: https://git.rkrishnan.org/pf/content/en/service/using.html?a=commitdiff_plain;h=0f182751a5d673fd898c09a73ed8364b5382aa29;p=tahoe-lafs%2Ftahoe-lafs.git docs: [source:docs/known_issues.txt] --- diff --git a/docs/known_issues.txt b/docs/known_issues.txt new file mode 100644 index 00000000..21351c6c --- /dev/null +++ b/docs/known_issues.txt @@ -0,0 +1,153 @@ += Known Issues = + +Below is a list of known issues in recent releases of Tahoe, and how to manage +them. + + +== issues in Tahoe v1.1.0, released 2008-06-10 == + +=== issue 1: server out of space when writing mutable file === + +If a v1.0 or v1.1.0 storage server runs out of disk space then its attempts to +write data to the local filesystem will fail. For immutable files, this will +not lead to any problem (the attempt to upload that share to that server will +fail, the partially uploaded share will be deleted from the storage server's +"incoming shares" directory, and the client will move on to using another +storage server instead). + +If the write was an attempt to modify an existing mutable file, however, a +problem will result: when the attempt to write the new share fails due to +insufficient disk space, then it will be aborted and the old share will be left +in place. If enough such old shares are left, then a subsequent read may get +those old shares and see the file in its earlier state, which is a "rollback" +failure. With the default parameters (3-of-10), six old shares will be enough +to potentially lead to a rollback failure. + +==== how to manage it ==== + +Make sure your Tahoe storage servers don't run out of disk space. This means +refusing storage requests before the disk fills up. There are a couple of ways +to do that with v1.1. + +First, there is a configuration option named "sizelimit" which will cause the +storage server to do a "du" style recursive examination of its directories at +startup, and then if the sum of the size of files found therein is greater than +the "sizelimit" number, it will reject requests by clients to write new +immutable shares. + +However, that can take a long time (something on the order of a minute of +examination of the filesystem for each 10 GB of data stored in the Tahoe +server), and the Tahoe server will be unavailable to clients during that time. + +Another option is to set the "readonly_storage" configuration option on the +storage server before startup. This will cause the storage server to reject +all requests to upload new immutable shares. + +Note that neither of these configurations affect mutable shares: even if +sizelimit is configured and the storage server currently has greater space used +than allowed, or even if readonly_storage is configured, servers will continue +to accept new mutable shares and will continue to accept requests to overwrite +existing mutable shares. + +Mutable files are typically used only for directories, and are usually much +smaller than immutable files, so if you use one of these configurations to stop +the influx of immutable files while there is still sufficient disk space to +receive an influx of (much smaller) mutable files, you may be able to avoid the +potential for "rollback" failure. + +A future version of Tahoe will include a fix for this issue. Here is +[http://allmydata.org/pipermail/tahoe-dev/2008-May/000630.html the mailing list +discussion] about how that future version will work. + + +== issues in Tahoe v1.1.0 and v1.0.0 == + +=== issue 2: pyOpenSSL and/or Twisted defect resulting false alarms in the unit tests === + +The combination of Twisted v8.1.0 and pyOpenSSL v0.7 causes the Tahoe v1.1 unit +tests to fail, even though the behavior of Tahoe itself which is being tested is +correct. + +==== how to manage it ==== + +If you are using Twisted v8.1.0 and pyOpenSSL v0.7, then please ignore XYZ in +XYZ. Downgrading to an older version of Twisted or pyOpenSSL will cause those +false alarms to stop happening. + + +== issues in Tahoe v1.0.0, released 2008-03-25 == + +(Tahoe v1.0 was superceded by v1.1 which was released 2008-06-10.) + +=== issue 3: server out of space when writing mutable file === + +In addition to the problems caused by insufficient disk space described above, +v1.0 clients which are writing mutable files when the servers fail to write to +their filesystem are likely to think the write succeeded, when it in fact +failed. This can cause data loss. + +==== how to manage it ==== + +Upgrade client to v1.1, or make sure that servers are always able to write to +their local filesystem (including that there is space available) as described in +"issue 1" above. + + +=== issue 4: server out of space when writing immutable file === + +Tahoe v1.0 clients are using v1.0 servers which are unable to write to their +filesystem during an immutable upload will correctly detect the first failure, +but if they retry the upload without restarting the client, or if another client +attempts to upload the same file, the second upload may appear to succeed when +it hasn't, which can lead to data loss. + +==== how to manage it ==== + +Upgrading either or both of the client and the server to v1.1 will fix this +issue. Also it can be avoided by ensuring that the servers are always able to +write to their local filesystem (including that there is space available) as +described in "issue 1" above. + + +=== issue 5: large directories or mutable files in a specific range of sizes === + +If a client attempts to upload a large mutable file with a size greater than +about 3,139,000 and less than or equal to 3,500,000 bytes then it will fail but +appear to succeed, which can lead to data loss. + +(Mutable files larger than 3,500,000 are refused outright). The symptom of the +failure is very high memory usage (3 GB of memory) and 100% CPU for about 5 +minutes, before it appears to succeed, although it hasn't. + +Directories are stored in mutable files, and a directory of approximately 9000 +entries may fall into this range of mutable file sizes (depending on the size of +the filenames or other metadata associated with the entries). + +==== how to manage it ==== + +This was fixed in v1.1, under ticket #379. If the client is upgraded to v1.1, +then it will fail cleanly instead of falsely appearing to succeed when it tries +to write a file whose size is in this range. If the server is also upgraded to +v1.1, then writes of mutable files whose size is in this range will succeed. +(If the server is upgraded to v1.1 but the client is still v1.0 then the client +will still suffer this failure.) + + +=== issue 6: pycryptopp defect resulting in data corruption === + +Versions of pycryptopp earlier than pycryptopp-0.5.0 had a defect which, when +compiled with some compilers, would cause AES-256 encryption and decryption to +be computed incorrectly. This could cause data corruption. Tahoe v1.0 +required, and came with a bundled copy of, pycryptopp v0.3. + +==== how to manage it ==== + +You can detect whether pycryptopp-0.3 has this failure when it is compiled by +your compiler. Run the unit tests that come with pycryptopp-0.3: unpack the +"pycryptopp-0.3.tar" file that comes in the Tahoe v1.0 {{{misc/dependencies}}} +directory, cd into the resulting {{{pycryptopp-0.3.0}}} directory, and execute +{{{python ./setup.py test}}}. If the tests pass, then your compiler does not +trigger this failure. + +Tahoe v1.1 requires, and comes with a bundled copy of, pycryptopp v0.5.1, which +does not have this defect.