From: Brian Warner <warner@allmydata.com>
Date: Wed, 18 Jun 2008 22:49:30 +0000 (-0700)
Subject: Makefile: minor comment
X-Git-Tag: allmydata-tahoe-1.2.0~75
X-Git-Url: https://git.rkrishnan.org/pf/content/en/service/using.html?a=commitdiff_plain;h=2fffdbd439407df58912eb43a8d8936f01ade470;p=tahoe-lafs%2Ftahoe-lafs.git

Makefile: minor comment
---

diff --git a/Makefile b/Makefile
index 3f74649e..d2962d4b 100644
--- a/Makefile
+++ b/Makefile
@@ -233,13 +233,13 @@ check-memory-once: .built
 	$(PP) \
 	 $(PYTHON) src/allmydata/test/check_memory.py $(MODE)
 
-# this target uses a pre-established client node to run a canned set of
-# performance tests against a test network that is also pre-established
-# (probably on a remote machine). Provide it with the path to a local
-# directory where this client node has been created (and populated with the
-# necessary FURLs of the test network). This target will start that client
-# with the current code and then run the tests. Afterwards it will stop the
-# client.
+# The check-speed target uses a pre-established client node to run a canned
+# set of performance tests against a test network that is also
+# pre-established (probably on a remote machine). Provide it with the path to
+# a local directory where this client node has been created (and populated
+# with the necessary FURLs of the test network). This target will start that
+# client with the current code and then run the tests. Afterwards it will
+# stop the client.
 #
 # The 'sleep 5' is in there to give the new client a chance to connect to its
 # storageservers, since check_speed.py has no good way of doing that itself.