From: Zooko O'Whielacronx Date: Wed, 2 May 2007 04:03:23 +0000 (-0700) Subject: some English usage edits to README, thanks to Stephen Hill X-Git-Tag: allmydata-tahoe-0.2.0~24 X-Git-Url: https://git.rkrishnan.org/vdrive/%22news.html/?a=commitdiff_plain;h=f49a63f688e0525ddb848fa100f1fac69f91b1cb;p=tahoe-lafs%2Ftahoe-lafs.git some English usage edits to README, thanks to Stephen Hill --- diff --git a/README b/README index a0988345..4de0215c 100644 --- a/README +++ b/README @@ -1,5 +1,5 @@ -Welcome to the AllMyData "tahoe" project. This project implements a -secure, distributed, fault-tolerant storage grid. +Welcome to the AllMyData "tahoe" project. This project implements a secure, +distributed, fault-tolerant storage grid. The basic idea is that the data in this storage grid is spread over all participating nodes, using an algorithm that can recover the data even if a @@ -31,15 +31,15 @@ DEPENDENCIES: Note: All of the following dependencies can probably be installed through your standard package management tool if you are running on a modern Unix - operating system. If you are running any modern Linux or *BSD distribution + operating system. If you are running any modern Linux or *BSD distribution, then you can get them through your standard package manager. If you are - running Mac OS X then be warned that the "fink" package management tool does - not have most of these packages, but the "darwinports" package management - tool appears to have them. If you are running on Windows then I'm afraid - you'll have to install them by hand (although the "cygwin" package - management tool does have some of them). If you are running on Solaris, - I would like to hear from you -- I have no idea how it is done on Solaris - nowadays. + running Mac OS X, then be warned that the "fink" package management tool + does not have most of these packages, but the "darwinports" package + management tool appears to have them. If you are running on Windows, then + I'm afraid you'll have to install them by hand (although the "cygwin" + package management tool does have some of them). If you are running on + Solaris, I would like to hear from you -- I have no idea how it is done on + Solaris nowadays. * a C compiler (language) @@ -72,9 +72,9 @@ DEPENDENCIES: http://peak.telecommunity.com/DevCenter/EasyInstall#installation-instructions - Note: the build process will automatically download and install setuptools + Note: The build process will automatically download and install setuptools if it is not present. However, if an old, incompatible version of - setuptools (< v0.6c3) is present then the build will fail. Therefore, if + setuptools (< v0.6c3) is present, then the build will fail. Therefore, if the build fails due to setuptools not being compatible, you can either upgrade or uninstall your version of setuptools and try again. @@ -88,7 +88,7 @@ DEPENDENCIES: * to build the debian packages you will need all the usual debian-packaging tools, which means the 'build-essential' metapackage and all of the packages listed as "Build-Depends" in DIST/debian/control for your - distribution. You will also want the 'fakeroot' package to allow the + distribution. You will also want the 'fakeroot' package to allow the top-level 'make deb-DIST' targets work. * on Windows, the pywin32 package @@ -102,7 +102,7 @@ DEPENDENCIES: BUILDING: - Just type 'make'. This works on Windows too, provided that you have the + Just type 'make'. This works on Windows too, provided that you have the dependencies mentioned above (either a normal cygwin build or a mingw-style native build is supported by the makefile -- the cygwin build is the default). @@ -162,49 +162,49 @@ INSTALLING: RUNNING: - If you installed one of the debian packages constructed by "make deb-*" then - it creates an 'allmydata-tahoe' executable, usually in /usr/bin . If you - didn't install a package you can find allmydata-tahoe in ./instdir/bin/ - . This tool is used to create, start, and stop nodes. Each node lives in a + If you installed one of the debian packages constructed by "make deb-*", + then it creates an 'allmydata-tahoe' executable, usually in /usr/bin . If + you didn't install a package you can find allmydata-tahoe in ./instdir/bin/ + . This tool is used to create, start, and stop nodes. Each node lives in a separate base directory, inside of which you can add files to configure and - control the node. Nodes also read and write files within that directory. + control the node. Nodes also read and write files within that directory. A grid consists of a single central 'introducer and vdrive' node and a large - number of 'client' nodes. If you are joining an existing grid, the + number of 'client' nodes. If you are joining an existing grid, the introducer-and-vdrive node will already be running, and you'll just need to - create a client node. If you're creating a brand new grid, you'll need to + create a client node. If you're creating a brand new grid, you'll need to create both an introducer-and-vdrive and a client (and then invite other people to create their own client nodes and join your grid). The introducer (-and-vdrive) node is constructed by running 'allmydata-tahoe - create-introducer --basedir $HERE'. Once constructed, you can start the + create-introducer --basedir $HERE'. Once constructed, you can start the introducer by running 'allmydata-tahoe start --basedir $HERE' (or, if you are already in the introducer's base directory, just type 'allmydata-tahoe - start'). Inside that base directory, there will be a pair of files - 'introducer.furl' and 'vdrive.furl'. Make a copy of these, as they'll be + start'). Inside that base directory, there will be a pair of files + 'introducer.furl' and 'vdrive.furl'. Make a copy of these, as they'll be needed on the client nodes. To construct a client node, pick a new working directory for it, then run - 'allmydata-tahoe create-client --basedir $HERE'. Copy the two .furl files + 'allmydata-tahoe create-client --basedir $HERE'. Copy the two .furl files from the introducer into this new directory, then run 'allmydata-tahoe start - --basedir $HERE'. After that, the client node should be off and running. The - first thing it will do is connect to the introducer and introduce itself to - all other nodes on the grid. You can follow its progress by looking at the - $HERE/twistd.log file. + --basedir $HERE'. After that, the client node should be off and running. + The first thing it will do is connect to the introducer and introduce itself + to all other nodes on the grid. You can follow its progress by looking at + the $HERE/twistd.log file. To actually use the client, enable the web interface by writing a port number (like "8080") into a file named $HERE/webport and then restarting the - node with 'allmydata-tahoe restart --basedir $HERE'. This will prompt the + node with 'allmydata-tahoe restart --basedir $HERE'. This will prompt the client node to run a webserver on the desired port, through which you can view, upload, download, and delete files. A client node directory can also be created without installing the code - first. Just use 'make create-client', and a new directory named 'CLIENTDIR' - will be created inside the top of the source tree. Copy the relevant .furl + first. Just use 'make create-client', and a new directory named 'CLIENTDIR' + will be created inside the top of the source tree. Copy the relevant .furl files in, set the webport, then start the node by using 'make start-client'. - To stop it again, use 'make stop-client'. Similar makefile targets exist for - making and running an introducer node. + To stop it again, use 'make stop-client'. Similar makefile targets exist + for making and running an introducer node. - There is a public grid available for testing. Look at the wiki page + There is a public grid available for testing. Look at the wiki page (http://allmydata.org) for the necessary .furl data.